Narrow track current-perpendicular-to-plane spin valve GMR heads

We have investigated the performance of dual spin valve heads in the current-perpendicular-to-plane (CPP) geometry on dynamic electrical tests (DET) and quasi-static tests (QST). Shielded CPP reader and stitched pole writer composite heads were fabricated. A various physical read track width and area of the dual spin valve element were deliberately obtained in the range of 41-175 nm and 0.0034-0.022 /spl mu/m/sup 2/, respectively. Materials used for the CPP dual spin valve are Co/sub 90/Fe/sub 10/, Ni/sub 80/Fe/sub 20/, Cu, Ru, Ta, and Pt/sub 50/Mn/sub 50/, which are common in industrial current-in-plane (CIP) spin valves. The shape and smoothness of QST transfer curve, readback waveform, micro-track, and full-track profiles of the narrow read track CPP heads are essentially just the same as those of CIP spin valve. A track-average-amplitude of 0.6 mV was obtained at the bias current density of element around 100 MA/cm/sup 2/ in the CPP head with the physical read track width of 47 nm. Overall reader resistance of the CPP heads at head gimbals assembly (HGA) level was in the range of 10-35 /spl Omega/ and proved to be well appropriate.

[1]  Fert,et al.  Theory of the perpendicular magnetoresistance in magnetic multilayers. , 1993, Physical review. B, Condensed matter.

[2]  Gijs,et al.  Perpendicular giant magnetoresistance of microstructured Fe/Cr magnetic multilayers from 4.2 to 300 K. , 1993, Physical review letters.

[3]  Zhang,et al.  Electrical transport in corrugated multilayered structures. , 1995, Physical review. B, Condensed matter.

[4]  W. Oepts,et al.  Perpendicular giant magnetoresistance of Co/Cu multilayers on grooved substrates: Systematic analysis of the temperature dependence of spin-dependent scattering. , 1996, Physical review. B, Condensed matter.

[5]  R. Loloee,et al.  Perpendicular-current exchange-biased spin-valve evidence for a short spin-diffusion lenght in permalloy , 1997 .

[6]  Bernard Dieny,et al.  A unified theory of CIP and CPP giant magnetoresistance in magnetic sandwiches , 1997 .

[7]  Giant magnetoresistance of current-perpendicular exchange-biased spin-valves of Co/Cu , 1998 .

[8]  W. Park,et al.  Perpendicular giant magnetoresistance of Co91Fe9/Cu exchange-biased spin-valves: further evidence for a unified picture , 1999 .

[9]  K. Ju,et al.  Effect of scattering at lateral edges on the current-perpendicular-to plane giant magnetoresistance of submicronic pillars , 2001 .

[10]  Satoshi Sasaki,et al.  Study on requirements for shielded current perpendicular to the plane spin valve heads based on dynamic read tests , 2002 .

[11]  S. Ishii,et al.  Maximization of the output of shielded current perpendicular to the plane spin valve heads by optimum sense current and hard bias , 2002 .

[12]  W. Pratt,et al.  Current-perpendicular-to-plane-magnetoresistance properties of Ru and Co/Ru interfaces , 2002 .

[13]  Hitoshi Iwasaki,et al.  The applicability of CPP-GMR heads for magnetic recording , 2002 .

[14]  Yoshihiko Seyama,et al.  Spin-valve heads in the current-perpendicular-to-plane mode for ultrahigh-density. recording , 2002 .

[15]  Eiji Makino,et al.  Film structure dependence of the magnetoresistive properties in current perpendicular to plane spin valves and its relation with current in plane magnetoresistive properties , 2002 .

[16]  Hitoshi Iwasaki,et al.  Output enhancement of spin-valve giant magnetoresistance in current-perpendicular-to-plane geometry , 2002 .

[17]  H. Oshima,et al.  Perpendicular giant magnetoresistance of CoFeB/Cu single and dual spin-valve films , 2002 .

[18]  J. Nowak,et al.  Analytical method for two dimensional current crowding effect in magnetic tunnel junctions , 2002 .

[19]  M. Saito,et al.  Det performance of narrow track CPP-GMR heads , 2003, Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401).