LDA measurements and CFD modelling of gas-liquid flow in a stirred vessel

[1]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[2]  O. C. Jones,et al.  Development of a k-ε Model for Bubbly Two-Phase Flow , 1994 .

[3]  H. Takeda,et al.  Numerical simulation of mixing flows in agitated vessels with impellers and baffles , 1993 .

[4]  A. D. Gosman,et al.  Multidimensional modeling of turbulent two‐phase flows in stirred vessels , 1992 .

[5]  Andreas Lübbert,et al.  Gas‐phase properties in stirred tank bioreactors , 1992 .

[6]  Andreas Lübbert,et al.  Flow structure of the dispersed gasphase in real multiphase chemical reactors investigated by a new ultrasound–doppler technique , 1991 .

[7]  T. G. Theofanous,et al.  Premixing of steam explosions: a three-fluid model , 1991 .

[8]  Suzanne M. Kresta,et al.  Prediction of the three-dimensional turbulent flow in stirred tanks , 1991 .

[9]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[10]  S. J. Lee,et al.  The Prediction of Two-Phase Turbulence and Phase Distribution Phenomena Using a Reynolds Stress Model , 1990 .

[11]  R. Pike,et al.  Three-dimensional turbulent flow in agitated vessels with a nonisotropic viscosity turbulence model , 1990 .

[12]  W. J. Turner,et al.  Applicability of the standard k-ϵ turbulence model to gas-stirred baths , 1988 .

[13]  L. C. Wrobel,et al.  Computational techniques in heat transfer Edited by R. W. Lewis, K. Morgan, J. A. Johnson and W. R. Smith Pineridge Press Ltd, 1985, £25.00/$44.00,ISBN 0-906674-39-5 , 1987 .

[14]  Ivan Fořt,et al.  Turbulent flow in stirred tanks. Part II: A two‐scale model of turbulence , 1986 .

[15]  Lawrence L. Tavlarides,et al.  Turbulent flow in stirred tanks. Part I: Turbulent flow in the turbine impeller region , 1985 .

[16]  Brian Launder,et al.  Numerical methods in laminar and turbulent flow , 1983 .

[17]  N. Zuber,et al.  Drag coefficient and relative velocity in bubbly, droplet or particulate flows , 1979 .

[18]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[19]  V. Dhir.  BOILING HEAT TRANSFER , 1998 .

[20]  H. V. D. Akker,et al.  A Computational Study on Dispersing Gas in a Stirred Reactor , 1992 .

[21]  G. K. Patterson,et al.  Measurements and Modelling of Flow in Gas Sparged, Agitated Vessels , 1992 .

[22]  R. T. Lahey,et al.  THE PREDICTION OF PHASE DISTRIBUTION AND SEPARATION PHENOMENA USING TWO-FLUID MODELS , 1992 .

[23]  Donald A. Drew,et al.  ANALYTICAL MODELING OF MULTIPHASE FLOWS , 1992 .

[24]  W. Rodi,et al.  Examples of turbulence model applications , 1991 .

[25]  R. Torvik,et al.  Modelling of slurry reactors. A fundamental approach , 1990 .

[26]  R. Issa,et al.  Prediction of the flow of interspersed gas and liquid phases through pipe bends , 1987 .

[27]  K. Pericleous,et al.  The modelling of tangential and axial agitators in chemical reactors , 1987 .

[28]  Nicholas P. Cheremisinoff,et al.  Handbook of heat and mass transfer , 1986 .

[29]  K. Morgan,et al.  Recent advances in numerical methods in fluids , 1980 .

[30]  D. Brian Spalding,et al.  Numerical computation of multi-phase fluid flow and heat transfer , 1980 .