Novel discontinuous PWM control method to improve IGBT reliability at low speed

Discontinuous PWM method (DPWM) has been widely used in industrial area to reduce the overall losses; however, it is only effective at higher output frequency condition for an adjustable speed drive (ASD). At low speed condition, the time constant of the IGBT thermal system is much lower than that of the fundamental frequency of the inverter. The harmonics contents as well as the IGBT junction temperature may be higher under DPWM than that of the space vector PWM (SVPWM). Consequently, the benefit of DPWM to reducing the IGBT junction temperature does not apply at low speed as more. This paper proposes a new DPWM (NPWM) method address the junction temperature issue. It is shown that the proposed method can demonstrate the benefit of reduce IGBT temperature at low speed. Analytical, simulation and experimental results will be presented to show its effectiveness.

[1]  Lixiang Wei,et al.  Analysis of PWM Frequency Control to Improve the Lifetime of PWM Inverter , 2011, IEEE Transactions on Industry Applications.

[2]  H. Reichl,et al.  Lifetime Estimation for Wire Bond Interconnections using Life-Cycle-Information Modules with Implemented Models , 2005, 2005 4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[3]  Ahmet M. Hava,et al.  Simple Analytical and Graphical Methods for Carrier-Based PWM-VSI Drives , 1999 .

[4]  J. Holtz,et al.  Pulsewidth modulation for electronic power conversion , 1994, Proc. IEEE.

[5]  A. Dasgupta,et al.  Failure mechanism models for cyclic fatigue , 1993 .

[6]  Lixiang Wei,et al.  Junction Temperature Prediction of a Multiple-chip IGBT Module under DC Condition , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[7]  G. Nicoletti,et al.  Fast power cycling test of IGBT modules in traction application , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.

[8]  V. Blasko,et al.  On line thermal model and thermal management strategy of a three phase voltage source inverter , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[9]  J. Kolar,et al.  Influence of the modulation method on the conduction and switching losses of a PWM converter system , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[10]  A. Nabae,et al.  A novel PWM scheme of voltage source inverters based on space vector theory , 1990 .

[11]  Wolfgang Fichtner,et al.  Lifetime prediction of IGBT modules for traction applications , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[12]  Ahmet M. Hava,et al.  A high performance generalized discontinuous PWM algorithm , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[13]  Wolfgang Fichtner,et al.  Lifetime prediction and design of reliability tests for high-power devices in automotive applications , 2003 .

[14]  Seung-Ki Sul,et al.  A Novel Voltage Modulation Technique of the Space Vector PWM , 1995 .