A new approach for layout optimization in maintenance workshops with safety factors: The case of a gas transmission unit

Abstract In this study, an Integrated Simulation-Data Envelopment Analysis (DEA) approach is presented for optimum facility layout of maintenance workshop in a gas transmission unit. The process of repair of incoming parts includes various operations on different facilities. The layout problem in this system involves determining the optimum location of all maintenance shop facilities. Layout optimization plays a crucial role in this type of problems in terms of increasing the efficiency of main production line. Standard types of layouts including U, S, W, Z and straight lines are considered. First, the maintenance workshop is modeled with discrete-event-simulation. Time in system, average waiting time, average machine utilization, average availability of facilities, average queue length of facilities (AL) and average operator utilization are obtained from simulation as key performance indicators (KPIs) of DEA. Also, safety index and number of operators are considered as other KPIs. Finally, a unified non-radial Data Envelopment Analysis (DEA) is presented with respect to the stated KPIs to rank all layouts alternatives and to identify the best configuration. Principle Component Analysis (PCA) is used to validate and verify the results. Previous studies do not consider safety factor in layout design problems. This is the first study that presents an integrated approach for identification of optimum layout in a maintenance workshop of gas transmission unit by incorporating safety and conventional factors.

[1]  Umut Rifat Tuzkaya,et al.  A particle swarm optimization algorithm for the multiple-level warehouse layout design problem , 2008, Comput. Ind. Eng..

[2]  Lazaros G. Papageorgiou,et al.  Optimal multi-floor process plant layout , 2002 .

[3]  Krishna K. Krishnan,et al.  A simulation-based approach for risk assessment of facility layout designs under stochastic product demands , 2010 .

[4]  Stanley S. Grossel.  Guidelines for facility siting and layout: Center for Chemical Process Safety of the AIChE (CCPS/AIChE), New York, NY, 2003, 198 pages, US$ 139.00 , 2004 .

[5]  M. Sam Mannan,et al.  An approach to solve the facility layout problem based on the worst-case scenario , 2010, Journal of Loss Prevention in the Process Industries.

[6]  Y. Wu,et al.  The optimisation of block layout and aisle structure by a genetic algorithm , 2002 .

[7]  Mª Carmen González-Cruz,et al.  An entropy-based algorithm to solve the facility layout design problem , 2011 .

[8]  Simaan M. AbouRizk,et al.  Optimisation of construction site layout using a hybrid simulation-based system , 2009, Simul. Model. Pract. Theory.

[9]  Hamed Samarghandi,et al.  A Particle Swarm Optimization for the Single Row Facility Layout Problem , 2009, 2009 World Congress on Nature & Biologically Inspired Computing (NaBIC).

[10]  Bao Zhang,et al.  Layout optimization of satellite module using soft computing techniques , 2008, Appl. Soft Comput..

[11]  Giuseppe Aiello,et al.  A multi objective genetic algorithm for the facility layout problem based upon slicing structure encoding , 2012, Expert Syst. Appl..

[12]  John S. Morris,et al.  A simulation comparison of process and cellular layouts in a dual resource constrained environment , 1994 .

[13]  Alan R. McKendall,et al.  Hybrid ant systems for the dynamic facility layout problem , 2006, Comput. Oper. Res..

[14]  Mehmet Savsar.  Flexible facility layout by simulation , 1991 .

[15]  José Rui Figueira,et al.  Single row facility layout problem using a permutation-based genetic algorithm , 2011, Eur. J. Oper. Res..

[16]  M. Sam Mannan,et al.  An approach for domino effect reduction based on optimal layouts , 2013 .

[17]  Ravi Kothari,et al.  Insertion based Lin-Kernighan heuristic for single row facility layout , 2013, Comput. Oper. Res..

[18]  Ying-Chin Ho,et al.  Machine layout with a linear single-row flow path in an automated manufacturing system , 1998 .

[19]  Toshiyuki Sueyoshi,et al.  Measurement of Returns to Scale and Damages to Scale for DEA-based operational and environmental assessment: How to manage desirable (good) and undesirable (bad) outputs? , 2011, Eur. J. Oper. Res..

[20]  Kam-Fai Wong,et al.  FACOPT: a user friendly FACility layout OPTimization system , 2003, Comput. Oper. Res..

[21]  K. P. Padmanaban,et al.  Machining fixture layout optimization using FEM and evolutionary techniques , 2007 .

[22]  Jianbin Xue,et al.  Deformation control through fixture layout design and clamping force optimization , 2008 .

[23]  John Wang,et al.  Facility layout optimization using simulation and genetic algorithms , 2000 .

[24]  Dedy Ng,et al.  An approach for risk reduction (methodology) based on optimizing the facility layout and siting in toxic gas release scenarios , 2010 .

[25]  Lawrence M. Seiford,et al.  Modeling undesirable factors in efficiency evaluation , 2002, Eur. J. Oper. Res..

[26]  Hasan Selim,et al.  Facility layout using weighted association rule-based data mining algorithms: Evaluation with simulation , 2012, Expert Syst. Appl..

[27]  Maghsud Solimanpur,et al.  Optimal solution for the two-dimensional facility layout problem using a branch-and-bound algorithm , 2008, Comput. Ind. Eng..

[28]  Ping-Teng Chang,et al.  Applying fuzzy weighted average approach to evaluate office layouts with Feng-Shui consideration , 2009, Math. Comput. Model..

[29]  Alan R. McKendall,et al.  Simulated annealing heuristics for the dynamic facility layout problem , 2006, Comput. Oper. Res..

[30]  S. Kumanan,et al.  Design of loop layout in flexible manufacturing system using non-traditional optimization technique , 2008 .

[31]  Michael C. Georgiadis,et al.  A general mathematical programming approach for process plant layout , 1999 .

[32]  Ali Azadeh,et al.  An integrated fuzzy DEA–fuzzy C-means–simulation for optimization of operator allocation in cellular manufacturing systems , 2010 .

[33]  Ravi Shankar,et al.  Ant colony optimization algorithm to the inter-cell layout problem in cellular manufacturing , 2004, Eur. J. Oper. Res..

[34]  Felix T.S. Chan,et al.  A genetic algorithm for facility layout problems , 1998 .

[35]  Ali Azadeh,et al.  An integrated fuzzy simulation-fuzzy data envelopment analysis algorithm for job-shop layout optimization: The case of injection process with ambiguous data , 2011, Eur. J. Oper. Res..