Energy Implications of Filtration in Residential and Light-Commercial Buildings

Higher-efficiency HVAC filters generally have a higher pressure drop and are widely assumed to increase energy consumption in smaller air conditioning systems. To explore the effects of filters in real buildings, we monitored 17 residential and light-commercial forced air cooling systems in Austin, TX. Measurements were made once per month for one year at each site with filters from three different MERV range categories. Measured parameters included system airflow, fan power draw, outdoor unit power draw, cooling capacity, pressure drops across filters and coils, and duct leakage. Higher-efficiency (MERV 11-12) filters generally had a small impact on parameters related to cooling energy consumption in the residential and light-commercial test systems when compared to lower-efficiency (MERV 2) filters. The median energy consequence of higher-efficiency filtration in the test systems was estimated as a decrease of approximately 16 kWh per ton of nominal capacity (4.6 kWh per kW) per month of cooling season operation, albeit with large variation, with most of these small savings coming from fan energy reductions. These results suggest a weak link between higher-efficiency filters and energy use in residential and lightcommercial systems and that other factors should govern filter selection.

[1]  D. B. Shirey,et al.  Impact of evaporator coil airflow in residential air-conditioning systems , 1997 .

[2]  Michael J. Chimack.  Using Extended Surface Air Filters in Heating Ventilation and Air Conditioning Systems: Reducing Utility and Maintenance Costs while Benefiting the Environment , 2000 .

[3]  Bob Davis,et al.  Measuring residential duct efficiency with the short-term coheat test methodology , 2006 .

[4]  Mark Modera.  Characterizing the performance of residential air distribution systems , 1993 .

[5]  Mark Modera,et al.  Field measurements of efficiency and duct retrofit effectiveness in residential forced air distributions systems , 1996 .

[6]  Dennis L. O'Neal,et al.  Effect of reduced evaporator airflow on the high temperature performance of air conditioners , 1996 .

[7]  W. Fisk,et al.  Performance and costs of particle air filtration technologies. , 2002, Indoor air.

[8]  Max H. Sherman,et al.  Saving Tons at the Register , 1998 .

[9]  Jeff Haberl,et al.  The Effect of Reduced Evaporator Air Flow on the Performance of a Residential Central Air Conditioner , 1992 .

[10]  B. C. Krafthefer,et al.  Energy use implications of methods to maintain heat exchanger coil cleanliness , 1986 .

[11]  D. A. Jump.  Field Measurements of Efficiency and Duct Effectiveness in Residential Forced Air Distributions Systems - eScholarship , 2011 .

[12]  J. B. Cummings,et al.  Ventilation, humidity, and energy impacts of uncontrolled airflow in a light commercial building , 1998 .

[13]  M. P. Modera.  Residential duct system leakage; Magnitude, impacts, and potential for reduction , 1989 .

[14]  Philip Fairey,et al.  Simulation of the effects of duct leakage and heat transfer on residential space-cooling energy use , 1993 .

[15]  Max H. Sherman,et al.  Delivering tons to the register: Energy efficient design and operation of residential cooling systems , 2000 .