Numerical workflow for 3d shape optimization and synthesis of vertical-axis wind turbines for specified operating regimes

This paper presents a numerical workflow designed and developed for autonomous synthesis of vertical axis wind turbine (VAWT) blades for maximum annual energy production at a specified location given by specified wind speed distribution and prescribed tip speed ratio. The workflow can synthesize shapes of both classical VAWT designs: Darrieus and Savonius rotors. This is achieved using a novel shape parameterization scheme based on B-splines which represents a compromise between shape generality and the multitude of shape variables. The developed computational framework enables the optimizer to synthesize and evaluate a variety of geometrically and even topologically different shapes such as the Darrieus and Savonius types. Moreover, the workflow can invent (i.e. numerically generate without a resembling initial shape) new generic shapes for custom operating conditions. Both single wind-speed and systems related to real-site operating conditions specified by a given distribution of wind speeds are considered. The developed workflow consists of efficient geometry parameterization, a genetic algorithm based optimizer and a computational fluid dynamics based simulator. The rather promising results of custom-shaped vertical axis wind turbines for maximum annual energy production at a given specific site are presented using a set of case studies.

[1]  Krishna Vijayaraghavan,et al.  The effects of aerofoil profile modification on a vertical axis wind turbine performance , 2015 .

[2]  Masoud Ghasemian,et al.  Aero-acoustics prediction of a vertical axis wind turbine using Large Eddy Simulation and acoustic analogy , 2015 .

[3]  M. Talavera,et al.  Experimental study of turbulence intensity influence on wind turbine performance and wake recovery in a low-speed wind tunnel , 2017 .

[4]  Mazharul Islam,et al.  Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines , 2008 .

[5]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[6]  Giles Thomas,et al.  Numerical simulation of the loading characteristics of straight and helical-bladed vertical axis tidal turbines , 2016 .

[7]  Leo Goldstein,et al.  A proposal and a theoretical analysis of a novel concept of a tilted-axis wind turbine , 2015 .

[8]  Jean-Luc Menet,et al.  A double-step Savonius rotor for local production of electricity: a design study , 2004 .

[9]  Carlo Poloni,et al.  Optimization of wind turbine positioning in large windfarms by means of a genetic algorithm , 1994 .

[10]  Paul Gipe,et al.  Wind power for home & business : renewable energy for the 1990s and beyond , 1993 .

[11]  Brian H. Dennis,et al.  Aerodynamic Shape Optimization of a Vertical-Axis Wind Turbine Using Differential Evolution , 2012 .

[12]  Ernesto Benini,et al.  Performance-optimized airfoil for Darrieus wind turbines , 2016 .

[13]  Víctor Manuel Fernandes Mendes,et al.  On a self-start Darrieus wind turbine: Blade design and field tests , 2015 .

[14]  Ning Qin,et al.  Wind tunnel and numerical study of a small vertical axis wind turbine , 2008 .

[15]  Damir Vučina,et al.  3D shape optimization of fan vanes for multiple operating regimes subject to efficiency and noise-related excellence criteria and constraints , 2016 .

[16]  D. Ganji,et al.  Numerical optimization of the asymmetric blades mounted on a vertical axis cross-flow wind turbine , 2016 .

[17]  J. Loth,et al.  Optimization of Darrieus Turbines with an Upwind and Downwind Momentum Model , 1983 .

[18]  Ernesto Benini,et al.  Optimization of a Darrieus vertical-axis wind turbine using blade element – momentum theory and evolutionary algorithm , 2013 .

[19]  Francesco Balduzzi,et al.  Feasibility analysis of a Darrieus vertical-axis wind turbine installation in the rooftop of a building , 2012 .

[20]  Chao Li,et al.  2.5D large eddy simulation of vertical axis wind turbine in consideration of high angle of attack flow , 2013 .

[21]  Ernesto Benini,et al.  Proposal for an innovative chord distribution in the Troposkien vertical axis wind turbine concept , 2014 .

[22]  Xin Shen,et al.  Aerodynamic shape optimization of non-straight small wind turbine blades , 2016 .

[23]  Chin-Hsiang Cheng,et al.  CFD (computational fluid dynamics)-based optimal design of a micro-reformer by integrating computational a fluid dynamics code using a simplified conjugate-gradient method , 2014 .

[24]  F. Pérez-Arribas,et al.  Computer-aided design of horizontal axis turbine blades , 2012 .

[25]  Herbert Martins Gomes,et al.  An airfoil optimization technique for wind turbines , 2012 .

[26]  Damir Vučina,et al.  Numerical models for robust shape optimization of wind turbine blades , 2016 .

[27]  Stefano Mauro,et al.  2D CFD Modeling of H-Darrieus Wind Turbines Using a Transition Turbulence Model , 2014 .

[28]  Mengxuan Song,et al.  The lazy greedy algorithm for power optimization of wind turbine positioning on complex terrain , 2015 .

[29]  J. Weber,et al.  Aeroacoustics of Darrieus Wind Turbine , 2015 .

[31]  R. D. Misra,et al.  Investigation of self-starting and high rotor solidity on the performance of a three S1210 blade H-type Darrieus rotor , 2015 .

[32]  Giovanni Ferrara,et al.  Design guidelines for H-Darrieus wind turbines: Optimization of the annual energy yield , 2015 .

[33]  Giuseppe Pascazio,et al.  Accurate numerical simulation of a high solidity Wells turbine , 2008 .

[34]  Hee-Chang Lim,et al.  Numerical study of the aerodynamic performance of a 500 W Darrieus-type vertical-axis wind turbine , 2015 .

[35]  Sungjun Joo,et al.  Aerodynamic characteristics of two-bladed H-Darrieus at various solidities and rotating speeds , 2015 .

[36]  João C.C. Henriques,et al.  Multi-point aerodynamic optimization of the rotor blade sections of an axial-flow impulse air turbine for wave energy conversion , 2012 .

[37]  Valerie-Marie Kumer,et al.  Turbulent kinetic energy estimates from profiling wind LiDAR measurements and their potential for wind energy applications , 2016 .

[38]  Carlos Simao Ferreira,et al.  Aerofoil optimization for vertical‐axis wind turbines , 2015 .

[39]  Damodar Maity,et al.  Optimum design configuration of Savonius rotor through wind tunnel experiments , 2008 .

[40]  Mats Leijon,et al.  Evaluation of different turbine concepts for wind power , 2008 .

[41]  Milan Curkovic,et al.  Efficient shape parameterization method for multidisciplinary global optimization and application to integrated ship hull shape optimization workflow , 2016, Comput. Aided Des..

[42]  Paul M. Weaver,et al.  A novel adaptive blade concept for large-scale wind turbines. Part I: Aeroelastic behaviour , 2014 .

[43]  Ernesto Benini,et al.  Evaluation of the different aerodynamic databases for vertical axis wind turbine simulations , 2014 .

[44]  Damir Vučina,et al.  Multi-Regime Shape Optimization of Fan Vanes for Energy Conversion Efficiency using CFD, 3D Optical Scanning and Parameterization , 2014 .

[45]  Pourya Alamdari,et al.  Aerodynamic design and economical evaluation of site specific small vertical axis wind turbines , 2013 .

[46]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[47]  M. A. Kamoji,et al.  Performance tests on helical Savonius rotors , 2009 .

[48]  Martin Otto Laver Hansen,et al.  Aerodynamics of Wind Turbines , 2001 .

[49]  M. Abid,et al.  Design, Development and Testing of a Combined Savonius and Darrieus Vertical Axis Wind Turbine , 2015 .

[50]  Roger,et al.  Wind Turbines , 2018 .

[51]  V. Mustafa,et al.  A new approach for optimization of Vertical Axis Wind Turbines , 2016 .

[52]  C. Ferreira.  The near wake of the VAWT: 2D and 3D views of the VAWT aerodynamics , 2009 .