Delamination detection in smart composite beams using Lamb waves

This paper presents a feasibility study on using Lamb waves to detect and locate through-width delamination in fiber-reinforced plastic beams. An active diagnostic system is proposed for clamped-free specimens. It consists of a piezoelectric patch and an accelerometer both mounted near the support. Such a system can locate damage in an absolute sense, that is, a priori knowledge on the response from pristine specimens is not required. The fundamental anti-symmetric Lamb wave mode is chosen as the diagnostic wave. It is generated by applying a voltage in the form of sinusoidal bursts to the piezoelectric patch. The proposed system was applied to locate delaminations in some fabricated Kevlar/epoxy beam specimens. With an appropriate actuating frequency, distortions of waveforms due to boundary reflections can be reduced. Based on their arrival times and the known propagating speed of Lamb waves, the delaminations can be located. The errors associated with the predicted damage positions range from 4.5% to 8.5%.

[1]  Ajit S. Bopardikar,et al.  Wavelet transforms - introduction to theory and applications , 1998 .

[2]  Daniel J. Inman,et al.  An experimentally validated damage detection theory in smart structures , 1996 .

[3]  H. Inoue,et al.  Time Frequency Analysis of Dispersive Waves by Means of Wavelet Transform , 1995 .

[4]  M. Lemistre,et al.  Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing , 2001 .

[5]  F. Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics , 1995 .

[6]  F. Chang,et al.  Structural health monitoring from fiber-reinforced composites to steel-reinforced concrete , 2001 .

[7]  T. S. Barry,et al.  Lamb Wave Assessment of Fatigue and Thermal Damage in Composites , 1998 .

[8]  Marek Krawczuk,et al.  Vibration of a Laminated Composite Plate with Closing Delamination , 1999 .

[9]  Constantinos Soutis,et al.  Damage detection in composite materials using lamb wave methods , 2002 .

[10]  James F. Doyle,et al.  Wave Propagation in Structures: An FFT-Based Spectral Analysis Methodology , 1989 .

[11]  A. Paolozzi,et al.  Detection of Debonding Damage in a Composite Plate through Natural Frequency Variations , 1990 .

[12]  T. J. Dudek,et al.  Young's and Shear Moduli of Unidirectional Composites by a Resonant Beam Method , 1970 .

[13]  Fu-Kuo Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part I—Experiments and Analysis , 1995 .

[14]  K. Craig,et al.  Damage detection in composite structures using piezoelectric materials (and neural net) , 1994 .

[15]  Dahsin Liu,et al.  Impact-Induced Delamination—A View of Bending Stiffness Mismatching , 1988 .

[16]  Takahiro Hayashi,et al.  Multiple reflections of Lamb waves at a delamination. , 2002, Ultrasonics.

[17]  P. Cawley,et al.  The interaction of Lamb waves with delaminations in composite laminates , 1993 .

[18]  A. C. Okafor,et al.  Delamination Prediction in Composite Beams with Built-In Piezoelectric Devices Using Modal Analysis and Neural Network , 1996 .

[19]  H. Jeong,et al.  Wavelet analysis of plate wave propagation in composite laminates , 2000 .

[20]  M D Seale,et al.  Lamb wave characterization of the effects of long-term thermal-mechanical aging on composite stiffness. , 1999, The Journal of the Acoustical Society of America.

[21]  S. Beard,et al.  Active Damage Detection in Filament Wound Composite Tubes Using Built-In Sensors and Actuators , 1997 .