By synthesizing large effective apertures through the translation of a smaller imaging sensor and the subsequent proper phasing and correlation of detected signals in postprocessing, holographic aperture ladar (HAL) systems seek to increase the resolution of remotely imaged targets. The stripmap HAL process was demonstrated in the laboratory, for the first time to our knowledge. Our results show that the stripmap HAL transformation can precisely account for off-axis transmitter induced phase migrations. This in turn allows multiple pupil plane field segments, sequentially collected across a synthetic aperture, to be coherently mosaiced together. As a direct consequence, we have been able to confirm the capability of the HAL method to potentially provide substantial increases in longitudinal cross-range resolution. The measurement and sampling of complex pupil plane field segments, as well as target related issues arising from short laboratory ranges, have also been addressed.
[1]
U. Schnars.
Direct phase determination in hologram interferometry with use of digitally recorded holograms
,
1994
.
[2]
M. Gross,et al.
Numerical heterodyne holography with two-dimensional photodetector arrays.
,
2000,
Optics letters.
[3]
Joseph Colineau,et al.
Short-range synthetic aperture imaging at 633 nm by digital holography.
,
2002,
Applied optics.
[4]
T J Green,et al.
Synthetic-aperture-radar imaging with a solid-state laser.
,
1995,
Applied optics.
[5]
Steven M Beck,et al.
Synthetic-aperture imaging laser radar: laboratory demonstration and signal processing.
,
2005,
Applied optics.
[6]
Ichirou Yamaguchi,et al.
Phase-shifting digital holography
,
1997
.
[7]
Matthew P Dierking,et al.
Holographic aperture ladar.
,
2009,
Applied optics.