Novel Nafion–zirconium phosphate nanocomposite membranes with enhanced stability of proton conductivity at medium temperature and high relative humidity

Abstract In order to increase the stability of Nafion conductivity at temperatures higher than 100 °C, composite membranes made of recast Nafion filled with different percentages of zirconium phosphate (ZrP) were investigated. The membrane preparation was carried out by a simple synthetic procedure based on the use of solutions of ZrP precursors in dimethylformamide. The formation of insoluble α-type ZrP nanoparticles within the Nafion matrix was proved by 31P-MAS NMR and X-ray diffractometry. The membranes were characterized by TEM microscopy, ion-exchange capacity determinations, static stress–strain mechanical tests and conductivity measurements as a function of filler loading, at controlled relative humidity (r.h.) and temperature. An increasing filler loading results in enhanced membrane stiffness and in lower conductivity compared with pure recast Nafion. At 90% r.h. and 100 °C, the conductivity decreases from ≈0.07 S cm−1 for pure Nafion to ≈0.03 S cm−1 for the composite membrane containing 25 wt.% ZrP. Systematic conductivity measurements as a function of r.h. and temperature were carried out to draw a stability map for the conductivity of pure recast Nafion and of a composite membrane filled with 10 wt.% ZrP. These maps provide for each r.h. value the maximum temperature at which the conductivity remains stable for at least 150 h. The effect of zirconium phosphate is to increase the stability of conductivity at high temperature, with a gain up to 20 °C. This stability enhancement has been ascribed to the higher stiffness of the composite membrane.

[1]  J. Mcgrath,et al.  Zirconium hydrogen phosphate/disulfonated poly(arylene ether sulfone) copolymer composite membranes for proton exchange membrane fuel cells , 2006 .

[2]  G. Alberti,et al.  Crystalline insoluble acid salts of tetravalent metals—XX Forward and reverse Cs+/H+ and Rb+/H+ ion exchange on crystalline zirconium phosphate , 1975 .

[3]  Andrew B. Bocarsly,et al.  Mechanical properties of Nafion and titania/Nafion composite membranes for polymer electrolyte membrane fuel cells , 2006 .

[4]  S. Srinivasan,et al.  A comparison of physical properties and fuel cell performance of Nafion and zirconium phosphate/Nafion composite membranes , 2003, physics/0310029.

[5]  Yu Zhu,et al.  A facile preparation of carbon-supported Pd nanoparticles for electrocatalytic oxidation of formic acid , 2008 .

[6]  Enrico Drioli,et al.  Sulfonated PEEK-WC membranes for possible fuel cell applications , 2004 .

[7]  Adélio Mendes,et al.  Performance and efficiency of a DMFC using non-fluorinated composite membranes operating at low/medium temperatures , 2005 .

[8]  Bernd Bauer,et al.  Polymeric proton conducting membranes for medium temperature fuel cells (110–160°C) , 2001 .

[9]  A. Clearfield,et al.  Epoxy Nanocomposites Based on the Synthetic α-Zirconium Phosphate Layer Structure , 2004 .

[10]  Comparison between Nafion® and a Nafion® Zirconium Phosphate Nano‐Composite in Fuel Cell Applications , 2006 .

[11]  G. Alberti,et al.  Preparation and proton conductivity of composite ionomeric membranes obtained from gels of amorphous zirconium phosphate sulfophenylenphosphonates in organic solvents , 2004 .

[12]  F. C. Wilson,et al.  The morphology in nafion† perfluorinated membrane products, as determined by wide- and small-angle x-ray studies , 1981 .

[13]  Felix Bauer,et al.  Zirconium phosphate Nafion® composites — a microstructure-based explanation of mechanical and conductivity properties , 2006 .

[14]  R. E. Smallman,et al.  An assessment of high voltage electron microscopy (HVEM). An invited review , 1977 .

[15]  G. Alberti,et al.  Nanocomposite membranes made of zirconium phosphate sulfophenylenphosphonate dispersed in polyvinylidene fluoride: Preparation and proton conductivity , 2005 .

[16]  Thomas J. Pinnavaia,et al.  Polymer-layered silicate nanocomposites: an overview , 1999 .

[17]  S. Srinivasan,et al.  Composite Nafion/Zirconium Phosphate Membranes for Direct Methanol Fuel Cell Operation at High Temperature , 2001 .

[18]  S. Ferroni,et al.  Preparation, characterization and proton conductivity of titanium phosphate sulfophenylphosphonate , 2001 .

[19]  G. Alberti,et al.  Composite Membranes for Medium-Temperature PEM Fuel Cells , 2003 .

[20]  K. Kreuer,et al.  On the development of proton conducting materials for technological applications , 1997 .

[21]  J. Kerres,et al.  Blended and Cross‐Linked Ionomer Membranes for Application in Membrane Fuel Cells , 2005 .

[22]  B. Schulte,et al.  Organic/inorganic composite membranes for application in DMFC , 2003 .

[23]  G. Alberti,et al.  Preparation and characterisation of α-layered zirconium phosphate sulfophenylenphosphonates with variable concentration of sulfonic groups , 2005 .

[24]  Jae-Il Kim,et al.  A study on self-humidifying PEMFC using Pt–ZrP–Nafion composite membrane , 2004 .

[25]  J. Hinatsu,et al.  Water Uptake of Perfluorosulfonic Acid Membranes from Liquid Water and Water Vapor , 1994 .

[26]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[27]  Paola Costamagna,et al.  Nafion® 115/zirconium phosphate composite membranes for operation of PEMFCs above 100 °C , 2002 .

[28]  Ki-Hyun Kim,et al.  Nafion/ZrSPP composite membrane for high temperature operation of proton exchange membrane fuel cells , 2006 .

[29]  Adélio Mendes,et al.  Characterization and application of composite membranes in DMFC , 2005 .

[30]  K. Sanui,et al.  Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers , 2000 .

[31]  Deborah J. Jones,et al.  Hybrid Polyaryletherketone Membranes for Fuel Cell Applications , 2002 .

[32]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[33]  Ki‐Hyun Kim,et al.  Nafion/ZrSPP composite membrane for high temperature operation of PEMFCs , 2004 .

[34]  G. Alberti,et al.  Preparation of Nano‐Structured Polymeric Proton Conducting Membranes for Use in Fuel Cells , 2003, Annals of the New York Academy of Sciences.

[35]  Suzana P. Nunes,et al.  Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells , 2002 .

[36]  Thomas J. Pinnavaia,et al.  Polymer-clay nanocomposites , 2000 .

[37]  Felix Bauer,et al.  Characterisation of zirconium and titanium phosphates and direct methanol fuel cell (DMFC) performance of functionally graded Nafion(R) composite membranes prepared out of them , 2005 .

[38]  G. Alberti,et al.  On the decay of Nafion proton conductivity at high temperature and relative humidity , 2006 .

[39]  Enrico Drioli,et al.  Preparation and characterization of sulfonated PEEK-WC membranes for fuel cell applications A comparison between polymeric and composite membranes , 2006 .

[40]  Emmanuel P. Giannelis,et al.  Polymer Layered Silicate Nanocomposites , 1996 .

[41]  A. Clearfield.  Inorganic ion exchangers with layered structures , 1984 .

[42]  A. Clearfield,et al.  Conductivity of group IV metal sulfophosphonates and a new class of interstratified metal amine-sulfophosphonates , 1996 .

[43]  G. Alberti.  Syntheses, crystalline structure, and ion-exchange properties of insoluble acid salts of tetravalent metals and their salt forms , 1978 .

[44]  G. Alberti,et al.  New Preparation Methods for Composite Membranes for Medium Temperature Fuel Cells Based on Precursor Solutions of Insoluble Inorganic Compounds , 2005 .

[45]  G. Onori,et al.  Dynamics of water confined in fuel cell Nafion membranes containing zirconium phosphate nanofiller , 2006 .

[46]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[47]  Deborah J. Jones,et al.  Recent advances in the functionalisation of polybenzimidazole and polyetherketone for fuel cell applications , 2001 .

[48]  A. Bottino,et al.  Gels of zirconium phosphate in organic solvents and their use for the preparation of polymeric nanocomposites , 2005 .

[49]  G. Alberti,et al.  On the mechanism of diffusion and ionic transport in crystalline insoluble acid salts of tetravalent metals—I Electrical conductance of zirconium bis (monohydrogen ortho-phosphate) monohydrate with a layered structure , 1978 .

[50]  Felix Bauer,et al.  Microstructural characterization of Zr-phosphate–Nafion® membranes for direct methanol fuel cell (DMFC) applications , 2004 .

[51]  Y. Mai,et al.  Preparation of exfoliated zirconium phosphate/nafion organic-inorganic hybrid proton exchange membranes , 2006 .

[52]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[53]  Paola Costamagna,et al.  Approaches and technical challenges to high temperature operation of proton exchange membrane fuel cells , 2001 .