Experimental Investigations on Current Sharing Characteristics of Parallel Chips Inside Press-Pack IGBT Devices

Press-pack insulated gate bipolar transistor (IGBT) devices have multiple chips paralleled to enhance their power density. However, the current imbalance among chips limits the increase of the power, which is mainly attributed to external factors, like stray inductance, temperature, and mechanical pressure. Besides, for the difficulties in decoupling multiple external factors, the current imbalance in press-pack IGBT devices has been extensively studied by simulation, and lack of experimental investigations. In this article, a multifactor decoupling experimental approach for the current sharing characteristics is proposed. The stray inductance, temperature, and mechanical pressure of the two parallel branches can be adjusted independently for investigating chips’ current sharing. Then, the experimental platform for the parallel 3.3 kV/50 A IGBT chips under differentiated external factors is implemented. Measured results show that the stray inductance affects the transient current sharing during turn-on greatly, and the maximum current imbalance can reach 25.46%. The temperature mainly affects the steady state and the maximum current imbalance is 11.7%. Otherwise, mechanical pressure is negligible on the steady and transient current imbalances, which are less than 3%. Finally, the influence mechanisms of the external factors are proposed to explain the current sharing characteristics of parallel chips.

[1]  X. Cui,et al.  Overvoltage Estimation by Stray Inductances During Turn-off of a 500 kV/25 kA DC Circuit Breaker , 2021, IEEE Transactions on Power Electronics.

[2]  Zhibin Zhao,et al.  Sequential Vce(T) Method for the Accurate Measurement of Junction Temperature Distribution Within Press-Pack IGBTs , 2021, IEEE Transactions on Power Electronics.

[3]  Hui Li,et al.  Investigation on the Effects of Unbalanced Clamping Force on Multichip Press Pack IGBT Modules , 2019, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[4]  Zhibin Zhao,et al.  Influence of Temperature on the Pressure Distribution Within Press Pack IGBTs , 2018, IEEE Transactions on Power Electronics.

[5]  Stig Munk-Nielsen,et al.  Influence of Paralleling Dies and Paralleling Half-Bridges on Transient Current Distribution in Multichip Power Modules , 2018, IEEE Transactions on Power Electronics.

[6]  Xiaoping Dai,et al.  Press-pack IGBTs for HVDC and FACTs , 2017 .

[7]  Noriyuki Iwamuro,et al.  IGBT History, State-of-the-Art, and Future Prospects , 2017, IEEE Transactions on Electron Devices.

[8]  Huai Wang,et al.  Comprehensive investigation on current imbalance among parallel chips inside MW-scale IGBT power modules , 2015, 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia).

[9]  Zhang Jin,et al.  Research and measurement of chip current imbalance in IGBT module with multiple chips in parallel , 2013, 2013 International Conference on Electrical Machines and Systems (ICEMS).

[10]  S. D'Arco,et al.  Influence of the clamping pressure on the electrical, thermal and mechanical behaviour of press-pack IGBTs , 2013, Microelectron. Reliab..

[11]  S. D'Arco,et al.  Mechanical analysis of press-pack IGBTs , 2012, Microelectron. Reliab..

[12]  Zhengming Zhao,et al.  Current sharing of IGBT modules in parallel with thermal imbalance , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[13]  A. Musing,et al.  Optimization of the current distribution in press-pack high power IGBT modules , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[14]  Ulrich Schlapbach,et al.  Dynamic paralleling problems in IGBT module construction and application , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[15]  A. Steimel,et al.  Impact of the anode current of an IGBT on the gate voltage , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[16]  Ichiro Omura,et al.  Electrical and mechanical package design for 4.5kV ultra high power IEGT with 6kA turn-off capability , 2003, ISPSD '03. 2003 IEEE 15th International Symposium on Power Semiconductor Devices and ICs, 2003. Proceedings..

[17]  G. Venkataramanan,et al.  Investigation of parallel operation of IGBTs , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[18]  S. Kaufmann,et al.  Innovative press pack modules for high power IGBTs , 2001, Proceedings of the 13th International Symposium on Power Semiconductor Devices & ICs. IPSD '01 (IEEE Cat. No.01CH37216).

[19]  H. Kirihata,et al.  Investigation of flat-pack IGBT reliability , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[20]  Hideo Matsuda,et al.  Pressure contact assembly technology of high power devices , 1997, Proceedings of 9th International Symposium on Power Semiconductor Devices and IC's.