Synthesis of new nanocrystal-polymer nanocomposite as the electron acceptor in polymer bulk heterojunction solar cells

A hydroxyl-coated CdSe nanocrystal (CdSe-OH) and a CdSe-polymer nanocomposite were synthesized and used as the electron acceptors in polymer solar cells (PSCs). The CdSe-polymer composite was prepared via atom transfer radical polymerization (ATRP) of N-vinylcarbazole on functionalized CdSe quantum dots. Physical properties and photovoltaic characteristics of the CdSe-poly(N-vinylcarbazole) (CdSe-PVK) nanocomposite have been investigated. Thermogravimetric analysis (TGA) results displayed higher thermal stability for CdSe-PVK nanohybrid in comparison with the linear-type PVK polymer. Differential scanning calorimetry (DSC) studies indicated that CdSe-PVK had a lower glass-transition temperature (Tg) in comparison with PVK due to the branch effect of the star-shaped polymer hybrid. Cyclic voltammetric (CV) measurements were performed to obtain HOMO and LUMO values of PVK and CdSe-PVK. TEM and SEM micrographs exhibited CdSe nanoparticles were well coated with PVK polymer. Both CdSe-OH and CdSe-PVK were blended with poly(3-hexylthiophene) (P3HT) and used as the active layer in bulk heterojunction solar cells. Polymer solar cell based on CdSe-PVK as acceptor revealed that the photovoltaic properties can be significantly improved when PVK polymer chains were grafted on surfaces of CdSe nanocrystals. In comparison with the P3HT:CdSe-OH system, PSC based on P3HT:CdSe-PVK showed an improved power conversion efficiency (0.02% vs. 0.001%). Film topography studied by AFM further confirmed the better device performance was due to the enhanced compatibility between P3HT and CdSe-PVK.

[1]  S. Maeda,et al.  Preparation and Characterization of Polypyrrole-Tin(IV) Oxide Nanocomposite Colloids , 1995 .

[2]  Ilan Gur,et al.  Hybrid Organic-Nanocrystal Solar Cells , 2005 .

[3]  I. Dance,et al.  [S4Cd17(SPh)28]2-, the first member of a third series of tetrahedral [SWMX(SR)y]z- clusters , 1988 .

[4]  Mats Andersson,et al.  Low‐Bandgap Alternating Fluorene Copolymer/Methanofullerene Heterojunctions in Efficient Near‐Infrared Polymer Solar Cells , 2006 .

[5]  Yadong Yin,et al.  Colloidal nanocrystal synthesis and the organic–inorganic interface , 2005, Nature.

[6]  Xiaoniu Yang,et al.  Toward High-Performance Polymer Solar Cells: The Importance of Morphology Control , 2007 .

[7]  Chien-Hsin Yang,et al.  Synthesis of CdSe-Poly(N-vinylcarbazole) Nanocomposite by Atom Transfer Radical Polymerization for Potential Optoelectronic Applications. , 2009, Macromolecular rapid communications.

[8]  A. Alivisatos,et al.  Light-emitting diodes made from cadmium selenide nanocrystals and a semiconducting polymer , 1994, Nature.

[9]  T. Wen,et al.  Electrochemical leveling effect on multi-aromatic monomer films to prepare robust conducting polymer nano-and microfilms by vapor deposition combined with electropolymerization , 2007 .

[10]  Donal D. C. Bradley,et al.  Hybrid Solar Cells from a Blend of Poly(3‐hexylthiophene) and Ligand‐Capped TiO2 Nanorods , 2008 .

[11]  A. Nozik.  Quantum dot solar cells , 2002 .

[12]  A. Alivisatos.  Semiconductor Clusters, Nanocrystals, and Quantum Dots , 1996, Science.

[13]  A Paul Alivisatos,et al.  Employing end-functional polythiophene to control the morphology of nanocrystal-polymer composites in hybrid solar cells. , 2004, Journal of the American Chemical Society.

[14]  C. O'connor,et al.  Recent advances in the liquid-phase syntheses of inorganic nanoparticles. , 2004, Chemical reviews.

[15]  Peng,et al.  Charge separation and transport in conjugated-polymer/semiconductor-nanocrystal composites studied by photoluminescence quenching and photoconductivity. , 1996, Physical review. B, Condensed matter.

[16]  A. Alivisatos,et al.  Hybrid Nanorod-Polymer Solar Cells , 2002, Science.

[17]  V. E. Wood,et al.  Nanocomposite Photonic Polymers. 1. Third-Order Nonlinear Optical Properties of Capped Cadmium Sulfide Nanocrystals in an Ordered Polydiacetylene Host , 1998 .

[18]  O. Inganäs,et al.  A New Donor–Acceptor–Donor Polyfluorene Copolymer with Balanced Electron and Hole Mobility† , 2007 .

[19]  A. Alivisatos,et al.  CdSe Nanocrystal Rods/Poly(3‐hexylthiophene) Composite Photovoltaic Devices , 1999 .

[20]  J. Parisi,et al.  Photo‐induced Charge Transfer and Relaxation of Persistent Charge Carriers in Polymer/Nanocrystal Composites for Applications in Hybrid Solar Cells , 2009 .

[21]  A. Müller,et al.  Hybrid Nanoparticles with Hyperbranched Polymer Shells via Self-Condensing Atom Transfer Radical Polymerization from Silica Surfaces , 2002 .

[22]  Youliang Zhao,et al.  Synthesis of well-defined star polymers and star block copolymers from dendrimer initiators by atom transfer radical polymerization , 2005 .

[23]  Jie Yin,et al.  Preparation and characterization of polyvinyl alcohol-capped CdSe nanoparticles at room temperature. , 2002, Journal of colloid and interface science.

[24]  Arthur J. Nozik,et al.  Synthesis and Characterization of Surface-Modified Colloidal CdTe Quantum Dots , 1993 .

[25]  Mats Andersson,et al.  Low bandgap alternating polyfluorene copolymers in plastic photodiodes and solar cells , 2004 .

[26]  W. J. Beek,et al.  Efficient Hybrid Solar Cells from Zinc Oxide Nanoparticles and a Conjugated Polymer , 2004 .

[27]  N. Greenham,et al.  Photovoltaic Devices Using Blends of Branched CdSe Nanoparticles and Conjugated Polymers , 2003 .

[28]  Marija Drndic,et al.  Efficient polymer-nanocrystal quantum-dot photodetectors , 2005 .