The optimal longitudinal location of curved winglets for better thermal performance of a finned-tube heat exchanger

[1]  Ke-wei Song,et al.  Thermal performance enhancement of a double-tube heat exchanger with novel twisted annulus formed by counter-twisted oval tubes , 2021 .

[2]  M. Doğan,et al.  An experimental comparison of delta winglet and novel type vortex generators for heat transfer enhancement in a rectangular channel and flow visualization with stereoscopic PIV , 2021 .

[3]  Satyender Singh,et al.  Numerical thermal performance investigation of phase change material integrated wavy finned single pass solar air heater , 2020 .

[4]  Jinlong Xie,et al.  Flow and heat transfer performances of directly printed curved-rectangular vortex generators in a compact fin-tube heat exchanger , 2020 .

[5]  M. K. Rathod,et al.  Thermal performance augmentation of fin-and-tube heat exchanger using rectangular winglet vortex generators having circular punched holes , 2020 .

[6]  Liangbi Wang,et al.  Thermal performance of a zig-zag channel formed by two wavy fins mounted with vortex generators , 2020 .

[7]  M. Thansekhar,et al.  A new method of acquiring perquisites of recirculation and vortex flow in sudden expansion solar water collector using vortex generator to augment heat transfer , 2020 .

[8]  A. Layek,et al.  Nusselt number and friction characteristics of a solar air heater that has a winglet type vortex generator in the absorber surface , 2020 .

[9]  Qi Liu,et al.  Flow Symmetry and Heat Transfer Characteristics of Winglet Vortex Generators Arranged in Common Flow up Configuration , 2020, Symmetry.

[10]  Xiang Wu,et al.  Characteristics of Flow Symmetry and Heat Transfer of Winglet Pair in Common Flow Down Configuration , 2020, Symmetry.

[11]  S. S. M. Ajarostaghi,et al.  Numerical evaluation of the thermal performance of a solar air heater equipped with two different types of baffles , 2020, Heat Transfer.

[12]  Liangbi Wang,et al.  Thermo-hydraulic performance optimization of wavy fin heat exchanger by combining delta winglet vortex generators , 2019 .

[13]  S. Poncet,et al.  Extensive numerical analysis of the thermal performance of a corrugated tube with coiled wire , 2019, Journal of Thermal Analysis and Calorimetry.

[14]  M. K. Rathod,et al.  Comparative study of heat transfer enhancement and pressure drop for fin-and-circular tube compact heat exchangers with sinusoidal wavy and elliptical curved rectangular winglet vortex generator , 2019, International Journal of Heat and Mass Transfer.

[15]  S. S. M. Ajarostaghi,et al.  Numerical evaluation of the effect of using twisted tapes as turbulator with various geometries in both sides of a double-pipe heat exchanger , 2019, Journal of Thermal Analysis and Calorimetry.

[16]  A. A. Bhuiyan,et al.  Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): A parametric study , 2019, International Journal of Thermal Sciences.

[17]  Zi-Xiang Tong,et al.  Parametric optimization of H-type finned tube with longitudinal vortex generators by response surface model and genetic algorithm , 2019, Applied Energy.

[18]  T. Khan,et al.  Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers , 2019, Applied Thermal Engineering.

[19]  H. Shokouhmand,et al.  Experiments on mist flow and heat transfer in a tube fitted with porous media , 2019, International Journal of Thermal Sciences.

[20]  Qiang Zhang,et al.  Heat transfer characteristics of concave and convex curved vortex generators in the channel of plate heat exchanger under laminar flow , 2019, International Journal of Thermal Sciences.

[21]  X. Zhai,et al.  Effects of curved vortex generators on the air-side performance of fin-and-tube heat exchangers , 2019, International Journal of Thermal Sciences.

[22]  Shuo Wang,et al.  Numerical study of thermal and flow characteristics for a fin-and-tube heat exchanger with arc winglet type vortex generators , 2019, International Journal of Refrigeration.

[23]  C. Dang,et al.  Heat transfer enhancement in a parallel, finless heat exchanger using a longitudinal vortex generator, Part A: Numerical investigation , 2019, International Journal of Heat and Mass Transfer.

[24]  H. Shokouhmand,et al.  An experimental investigation on forced convection heat transfer of single-phase flow in a channel with different arrangements of porous media , 2018, International Journal of Thermal Sciences.

[25]  Xiaoqiang Zhai,et al.  Analysis on heat transfer and pressure drop of fin-and-oval-tube heat exchangers with tear-drop delta vortex generators , 2018, International Journal of Heat and Mass Transfer.

[26]  Toshio Tagawa,et al.  The optimal arrangement of vortex generators for best heat transfer enhancement in flat-tube-fin heat exchanger , 2018, International Journal of Thermal Sciences.

[27]  Qiang Wang,et al.  Analysis of heat and resistance performance of plate fin-and-tube heat exchanger with rectangle-winglet vortex generator , 2018, International Journal of Heat and Mass Transfer.

[28]  S. Harikrishnan,et al.  Numerical investigations on heat transfer characteristics of curved rectangular winglet placed in a channel , 2018, International Journal of Thermal Sciences.

[29]  Zuoqin Qian,et al.  Simulation investigation on inlet velocity profile and configuration parameters of louver fin , 2018, Applied Thermal Engineering.

[30]  Dipankar Bhanja,et al.  Numerical investigation for the optimal placements of rectangular vortex generators for improved thermal performance of fin-and-tube heat exchangers , 2018 .

[31]  Davood Toghraie,et al.  Numerical simulation of heat transfer enhancement in a plate-fin heat exchanger using a new type of vortex generators , 2018 .

[32]  T. Condra,et al.  Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design , 2018 .

[33]  Amin Ebrahimi,et al.  Laminar convective heat transfer of shear-thinning liquids in rectangular channels with longitudinal vortex generators , 2017, 1807.03672.

[34]  Ke-wei Song,et al.  Heat transfer and pressure drop characteristics of the tube bank fin heat exchanger with fin punched with flow redistributors and curved triangular vortex generators , 2017, Heat and Mass Transfer.

[35]  Liang-Chen Wang,et al.  Effect of geometric size of curved delta winglet vortex generators and tube pitch on heat transfer characteristics of fin-tube heat exchanger , 2017 .

[36]  Dipti Prasad Mishra,et al.  Effect of winglet location on heat transfer of a fin-and-tube heat exchanger , 2017 .

[37]  J. Harion,et al.  Heat transfer and mixing enhancement by using multiple freely oscillating flexible vortex generators , 2016 .

[38]  Song Liu,et al.  Quantitative relationship between secondary flow intensity and heat transfer intensity in flat-tube-and-fin air heat exchanger with vortex generators , 2016 .

[39]  P.M.V. Subbarao,et al.  Development of parametric space for the vortex generator location for improving thermal compactness of an existing inline fin and tube heat exchanger , 2016 .

[40]  Jurandir Itizo Yanagihara,et al.  Thermal-hydraulic performance optimization of inline and staggered fin-tube compact heat exchangers applying longitudinal vortex generators , 2016 .

[41]  Ke-Wei Song,et al.  Interaction of counter rotating longitudinal vortices and the effect on fluid flow and heat transfer , 2016 .

[42]  You-qing Wang,et al.  Numerical investigation of a finned-tube heat exchanger with novel longitudinal vortex generators , 2015 .

[43]  Xiaoze Du,et al.  Numerical simulation on flow and heat transfer of fin-and-tube heat exchanger with longitudinal vortex generators * , 2015 .

[44]  J. Yanagihara,et al.  Optimization of winglet-type vortex generator positions and angles in plate-fin compact heat exchanger: Response Surface Methodology and Direct Optimization , 2015 .

[45]  Zhi-Ming Luo,et al.  Numerical simulation of heat transfer and fluid flow characteristics of composite fin , 2014 .

[46]  Pan Chu,et al.  Analysis of heat transfer and pressure drop for fin-and-tube heat exchangers with rectangular winglet-type vortex generators , 2013 .

[47]  Liang-Bi Wang,et al.  The Effectiveness of Secondary Flow Produced by Vortex Generators Mounted on Both Surfaces of the Fin to Enhance Heat Transfer in a Flat Tube Bank Fin Heat Exchanger , 2013 .

[48]  Gautam Biswas,et al.  Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers , 2013 .

[49]  Ye-Feng Wang,et al.  Numerical study of the fin efficiency and a modified fin efficiency formula for flat tube bank fin heat exchanger , 2011 .

[50]  Liang-Bi Wang,et al.  Numerical study of heat transfer enhancement of finned flat tube bank fin with vortex generators mounted on both surfaces of the fin , 2008 .