Contemporary denture base resins: Part 2.

UNLABELLED Provision of partial and complete dentures constructed from resin is commonplace and a satisfactory outcome requires the consideration of the properties of the resin, the oral tissues and prosthodontic principles. This second of a two-part series examines the advantages and disadvantages of flexible nylon denture base resins, which have found popularity for the provision of partial dentures. Adverse effects of denture base resins are examined and the benefits and shortcomings of softliners are explored. Chairside adjustment and polishing, and denture hygiene are also discussed. CLINICAL RELEVANCE Knowledge of contemporary denture base resin systems will help to achieve optimal outcomes in removable prosthodontics.

[1]  J. Ferracane.  Hygroscopic and hydrolytic effects in dental polymer networks. , 2006, Dental materials : official publication of the Academy of Dental Materials.

[2]  P. Vallittu.  Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers. , 1999, The Journal of prosthetic dentistry.

[3]  P. Wright.  The success and failure of denture soft-lining materials in clinical use. , 1984, Journal of dentistry.

[4]  J. Verran,et al.  Retention of Candida albicans on acrylic resin and silicone of different surface topography. , 1997, The Journal of prosthetic dentistry.

[5]  A. Käyser.  Shortened dental arches and oral function. , 1981, Journal of oral rehabilitation.

[6]  R. Vowles,et al.  Denture Cleansers, Soft Lining Materials and Water Temperature: What is the Effect? , 2008, Primary dental care : journal of the Faculty of General Dental Practitioners.

[7]  M. Hill,et al.  Tissue conditioning materials as functional impression materials. , 2007, The European journal of prosthodontics and restorative dentistry.

[8]  P. Monsénégo.  Presence of microorganisms on the fitting denture complete surface: study 'in vivo'. , 2000, Journal of oral rehabilitation.

[9]  A. Fisher.  Allergic sensitization of the skin and oral mucosa to acrylic denture materials. , 1954, Journal of the American Medical Association.

[10]  D. Watts,et al.  The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin. , 2004, The Journal of prosthetic dentistry.

[11]  D. Matear,et al.  Efficacy of antifungal agents in tissue conditioners in treating candidiasis. , 1999, Gerodontology.

[12]  J. Crissey.  Stomatitis, dermatitis, and denture materials. , 1965, Archives of dermatology.

[13]  D. Radford,et al.  Chairside polishing of heat-cured acrylic resin: an SEM and EDA study. , 2003, The International journal of prosthodontics.

[14]  K. Jandt,et al.  The reinforcement of dentures. , 1999, Journal of oral rehabilitation.

[15]  A. Batista,et al.  Effect of disinfection treatments on the hardness of soft denture liner materials. , 2007, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[16]  A. Hargreaves.  Nylon as a denture-base material. , 1971, The Dental practitioner and dental record.

[17]  G. Polyzois.  Adhesion properties of resilient lining materials bonded to light-cured denture resins. , 1992, The Journal of prosthetic dentistry.

[18]  M. Ghannoum,et al.  Antifungal Resistance of Candidal Biofilms Formed on Denture Acrylic in vitro , 2001, Journal of dental research.

[19]  J W Farah,et al.  Stress analysis of mandibular partial dentures with bounded and free-end saddles. , 1980, Journal of dentistry.

[20]  Y. Hashimoto,et al.  Estrogenic activity of tissue conditioners in vitro. , 2003, Dental materials : official publication of the Academy of Dental Materials.

[21]  P. Vallittu,et al.  The static strength and modulus of fiber reinforced denture base polymer. , 2005, Dental materials : official publication of the Academy of Dental Materials.

[22]  G. Stafford,et al.  Fracture toughness of denture base acrylics. , 1980, Journal of biomedical materials research.

[23]  Nenad Funduk,et al.  Effects of polishing techniques on the surface roughness of acrylic denture base resins. , 2005, The Journal of prosthetic dentistry.

[24]  Ali Parvizi,et al.  Comparison of the dimensional accuracy of injection-molded denture base materials to that of conventional pressure-pack acrylic resin. , 2004, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[25]  M. Okazaki,et al.  Apoptotic and necrotic influence of dental resin polymerization initiators in human gingival fibroblast cultures. , 2007, Dental materials journal.

[26]  D. Gawkrodger.  Investigation of reactions to dental materials , 2005, The British journal of dermatology.

[27]  H. Tsuchiya,et al.  Leaching and cytotoxicity of formaldehyde and methyl methacrylate from acrylic resin denture base materials. , 1994, The Journal of prosthetic dentistry.

[28]  F. Mante,et al.  In vitro changes in hardness of sealed resilient lining materials on immersion in various fluids. , 2008, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[29]  R E Ogle,et al.  Comparison of accuracy between compression- and injection-molded complete dentures. , 1999, The Journal of prosthetic dentistry.

[30]  J. Geier,et al.  Evaluation of patch test results with denture material series , 1996, Contact dermatitis.

[31]  A. Hugoson,et al.  A 25 year longitudinal study of patients treated with removable partial dentures. , 1995, Journal of oral rehabilitation.

[32]  H. Newman,et al.  The effect of partial denture connectors on gingival health. , 1992, Journal of clinical periodontology.

[33]  L. Gettleman,et al.  The influence of water storage on durometer hardness of 5 soft denture liners over time. , 2005, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[34]  P. Pfeiffer,et al.  Residual methyl methacrylate monomer, water sorption, and water solubility of hypoallergenic denture base materials. , 2004, The Journal of prosthetic dentistry.

[35]  M. Braden.  The absorption of water by acrylic resins and other materials , 1964 .

[36]  Vallittu Pk.  Glass fiber reinforcement in repaired acrylic resin removable dentures: preliminary results of a clinical study. , 1997 .

[37]  G C PAFFENBARGER,et al.  The effect of molding processes on some properties of denture resins. , 1952, Journal of the American Dental Association.

[38]  S. Kalachandra,et al.  Water sorption of plasticized denture acrylic lining materials. , 1989, Dental materials : official publication of the Academy of Dental Materials.

[39]  S. Yannikakis,et al.  Evaluation of porosity in microwave-processed acrylic resin using a photographic method. , 2002, The Journal of prosthetic dentistry.

[40]  A. Walmsley.  Acrylic partial dentures. , 2003, Dental update.

[41]  P. Vallittu.  Acrylic resin-fiber composite--Part II: The effect of polymerization shrinkage of polymethyl methacrylate applied to fiber roving on transverse strength. , 1994, The Journal of prosthetic dentistry.

[42]  Baemmert Rj,et al.  Effects of denture teeth on the dimensional accuracy of acrylic resin denture bases , 1990 .

[43]  B. C. Webb,et al.  Effectiveness of two methods of denture sterilization. , 1998, Journal of oral rehabilitation.

[44]  P. Pfeiffer,et al.  Flexural strength and moduli of hypoallergenic denture base materials. , 2005, The Journal of prosthetic dentistry.

[45]  D. Barrett.  Interventions for cleaning dentures in adults. , 2010, International journal of evidence-based healthcare.

[46]  J. F. Bates,et al.  A review of the properties of some denture base polymers. , 1980, Journal of dentistry.

[47]  W. J. Pryor.  Injection Molding of Plastics for Dentures , 1942 .

[48]  P. Kaplan.  Flexible removable partial dentures: design and clasp concepts. , 2008, Dentistry today.