A Reconfigurable Partially Reflective Surface (PRS) Antenna for Beam Steering

The design of a novel partially reflective surface (PRS) antenna with the capability of beam steering is presented in this paper. The beam steering is realized by employing a reconfigurable PRS structure to achieve a changeable reflection phase as well as using a phased array as the source to excite the PRS antenna. A prototype antenna including the biasing network is fabricated and measured. It achieves a consistent beam steering from - 15° to 15° with respect to the broadside direction across an overlapped frequency range from 5.5 to 5.7 GHz with measured realized gains over 12 dBi. Good agreement between the simulated and measured results for the input reflection coefficients and radiation patterns is achieved, which validates the feasibility of the design principle. Compared with other beam steering PRS antennas, the proposed one enables a larger beam steering angle with comparable gains, requires a simpler biasing network, and is more compact.

[1]  J. Perruisseau-Carrier Dual-Polarized and Polarization-Flexible Reflective Cells With Dynamic Phase Control , 2010, IEEE Transactions on Antennas and Propagation.

[2]  Shah Nawaz Burokur,et al.  Inductive-varying grid for highly beam-steerable cavity antennas , 2013 .

[3]  D. Parker,et al.  Phased arrays - part 1: theory and architectures , 2002 .

[4]  Abdelwaheb Ourir,et al.  Electronic beam steering of an active metamaterial-based directive subwavelength cavity , 2007 .

[5]  A. Weily,et al.  A Reconfigurable High-Gain Partially Reflecting Surface Antenna , 2008, IEEE Transactions on Antennas and Propagation.

[6]  Thomas Zwick,et al.  A Novel Millimeter-Wave Dual-Fed Phased Array for Beam Steering , 2013, IEEE Transactions on Microwave Theory and Techniques.

[7]  F. D. Flaviis,et al.  Reconfigurable scan-beam single-arm spiral antenna integrated with RF-MEMS switches , 2006, IEEE Transactions on Antennas and Propagation.

[8]  R. Guzman-Quiros,et al.  Electronic Full-Space Scanning With 1-D Fabry–Pérot LWA Using Electromagnetic Band-Gap , 2012, IEEE Antennas and Wireless Propagation Letters.

[9]  Y. Guo,et al.  A Beam Switching Quasi-Yagi Dipole Antenna , 2013, IEEE Transactions on Antennas and Propagation.

[10]  G. V. Trentini Partially reflecting sheet arrays , 1956 .

[11]  Ming-Iu Lai,et al.  Compact Switched-Beam Antenna Employing a Four-Element Slot Antenna Array for Digital Home Applications , 2008, IEEE Transactions on Antennas and Propagation.

[12]  M. Garcia-Vigueras,et al.  1D-Leaky Wave Antenna Employing Parallel-Plate Waveguide Loaded With PRS and HIS , 2011, IEEE Transactions on Antennas and Propagation.

[13]  Nicolaos G. Alexopoulos,et al.  Gain enhancement methods for printed circuit antennas , 1984 .

[14]  D. Parker,et al.  Microwave industry outlook - defense applications , 2002 .

[15]  Andrew R. Weily,et al.  Electronically Steerable 1-D Fabry-Perot Leaky-Wave Antenna Employing a Tunable High Impedance Surface , 2012, IEEE Transactions on Antennas and Propagation.

[16]  Yintang Yang,et al.  A Defected Microstrip Structure (DMS)-Based Phase Shifter and Its Application to Beamforming Antennas , 2014, IEEE Transactions on Antennas and Propagation.

[17]  D. Jackson,et al.  Leaky‐Wave Antennas , 2008 .

[18]  Tomislav Debogovic,et al.  Array-Fed Partially Reflective Surface Antenna With Independent Scanning and Beamwidth Dynamic Control , 2014, IEEE Transactions on Antennas and Propagation.

[19]  Abdelwaheb Ourir,et al.  Phase-varying metamaterial for compact steerable directive antenna , 2007 .

[20]  T. I. Yuk,et al.  Design of Polarization Reconfigurable Antenna Using Metasurface , 2014, IEEE Transactions on Antennas and Propagation.