Low cost processing of CIGS thin film solar cells

A set of low cost techniques with realistic potential for direct manufacturing costs reduction were developed in the last five years while the industrial Cu(In,Ga)Se2 (CIGS) solar cell production is based on vacuum processes, which require high initial investment into production machines. The common properties of these low cost techniques are the use of simple and fast non-vacuum deposition methods and the prefixing of the film-composition on a molecular level in a precursor layer, which is chemically and thermally treated to form a high quality CIGS film. The paste coating approaches use premixed inks which are applied by doctor-blade coating to yield solar cell efficiencies of 13.6%, with the potential to reach 15% and more in the next years. The choice of the precursor material has to be made with respect to the used selenization conditions to avoid detrimental impurity phases. A new precursor material is discussed, which allows fast conversion in selenium atmosphere and was used to produce solar cells with 6.7% efficiency. The CIGS film thickness has to be increased for complete absorption of the incident light.

[1]  Rommel Noufi,et al.  Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin‐film solar cells , 2003 .

[2]  J. Sites,et al.  15.4% CuIn1−xGaxSe2-based photovoltaic cells from solution-based precursor films , 2000 .

[3]  S. Pratsinis,et al.  Electrosprayed and selenized Cu/In metal particle films , 2004 .

[4]  H. Schock,et al.  CIGS‐based solar cells for the next millennium , 2000 .

[5]  J. Palm,et al.  CIS module pilot processing applying concurrent rapid selenization and sulfurization of large area thin film precursors , 2003 .

[6]  Brian J. Brown,et al.  Similarities in the chemical mechanisms of CuInSe2 and CdS thin film formation by chemical spray pyrolysis , 1990 .

[7]  E. Gombia,et al.  Vapor growth, thermodynamical study and characterization of CuInTe2 and CuGaTe2 single crystals , 1983 .

[8]  Omar Isaac Asensio,et al.  Non-vacuum processing of CuIn1−xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks , 2003 .

[9]  H. Zogg,et al.  Low-cost CIGS solar cells by paste coating and selenization , 2005 .

[10]  R. Feigelson,et al.  Spray pyrolysis of CuInSe2 and related ternary semiconducting compounds , 1979 .

[11]  Bulent M. Basol,et al.  Low cost methods for the production of semiconductor films for CuInSe2/CdS solar cells☆ , 1987 .

[12]  V. Mikli,et al.  Composition of CuInS2 thin films prepared by spray pyrolysis , 2002 .

[13]  T. B. Nasrallah,et al.  Evolution of the properties of spray-deposited CuInS2 thin films with post-annealing treatment , 2003 .

[14]  Jerry D. Harris,et al.  A new facile route for the preparation of single-source precursors for bulk, thin-film, and nanocrystallite I-III-VI semiconductors. , 2003, Inorganic chemistry.

[15]  Bulent M. Basol,et al.  Low cost techniques for the preparation of Cu(In,Ga)(Se,S) 2 absorber layers , 2000 .

[16]  Anthony C. Sutorik,et al.  Synthesis of mixed copper-indium chalcogenolates. Single-source precursors for the photovoltaic materials CuInQ2 (Q = S, Se) , 1993 .

[17]  K. Zweibel,et al.  Issues in thin film PV manufacturing cost reduction , 1999 .

[18]  D. Lincot,et al.  Efficient Cu(In, Ga)Se 2 Based Solar Cells Prepared by Electrodeposition , 2003 .

[19]  C. Eberspacher,et al.  Non-vacuum processing of CIGS solar cells , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[20]  G. Niklasson,et al.  Electrical and optical properties of thin films consisting of tin-doped indium oxide nanoparticles , 2003 .

[21]  Hans Zogg,et al.  CIS and CIGS layers from selenized nanoparticle precursors , 2003 .

[22]  T. Arita,et al.  CuInSe/sub 2/ films prepared by screen-printing and sintering method , 1988, Conference Record of the Twentieth IEEE Photovoltaic Specialists Conference.

[23]  S. Wulff,et al.  Electrodeposition of CIGS on Metal Substrates , 2003 .

[24]  V. Alberts.  Comparison of Material Properties of CuInSe2 Films Produced by Reaction of Metallic Alloys to H2Se/Ar and Elemental Se Vapour , 2002 .

[25]  K. Kushiya.  Progress in large-area Cu(InGa)Se/sub 2/-based thin-film modules with the efficiency of over 13% , 2003, 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of.

[26]  Jerry D. Harris,et al.  Ternary single‐source precursors for polycrystalline thin‐film solar cells , 2002 .