A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power Devices

This paper presents an isolated on-board vehicular battery charger that utilizes silicon carbide (SiC) power devices to achieve high density and high efficiency for application in electric vehicles (EVs) and plug-in hybrid EVs (PHEVs). The proposed level 2 charger has a two-stage architecture where the first stage is a bridgeless boost ac-dc converter and the second stage is a phase-shifted full-bridge isolated dc-dc converter. The operation of both topologies is presented and the specific advantages gained through the use of SiC power devices are discussed. The design of power stage components, the packaging of the multichip power module, and the system-level packaging is presented with a primary focus on system density and a secondary focus on system efficiency. In this work, a hardware prototype is developed and a peak system efficiency of 95% is measured while operating both power stages with a switching frequency of 200 kHz. A maximum output power of 6.1 kW results in a volumetric power density of 5.0 kW/L and a gravimetric power density of 3.8 kW/kg when considering the volume and mass of the system including a case.

[1]  Leon M. Tolbert,et al.  Impact of SiC Devices on Hybrid Electric and Plug-In Hybrid Electric Vehicles , 2008, IEEE Transactions on Industry Applications.

[2]  A. Radun,et al.  A 1-MHz hard-switched silicon carbide DC–DC converter , 2003, IEEE Transactions on Power Electronics.

[3]  Allen R. Hefner,et al.  SiC power diodes provide breakthrough performance for a wide range of applications , 2001 .

[4]  A. Khaligh,et al.  Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems , 2006, IEEE Transactions on Power Electronics.

[5]  H. Mantooth,et al.  Power Conversion With SiC Devices at Extremely High Ambient Temperatures , 2007, IEEE Transactions on Power Electronics.

[6]  M. Corradin,et al.  Performance evaluation of a Schottky SiC power diode in a boost PFC application , 2002 .

[7]  Kaushik Rajashekara,et al.  Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.

[8]  Martin F. Schlecht,et al.  A 1 kW, 500 kHz front-end converter for a distributed power supply system , 1989, Proceedings, Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[9]  F. Canales,et al.  A Comparative Performance Study of an Interleaved Boost Converter Using Commercial Si and SiC Diodes for PV Applications , 2013, IEEE Transactions on Power Electronics.

[10]  P. T. Krein,et al.  Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles , 2013, IEEE Transactions on Power Electronics.

[11]  A. Emadi,et al.  Plug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[12]  D. Boroyevich,et al.  A High-Temperature SiC Three-Phase AC - DC Converter Design for > 100/spl deg/C Ambient Temperature , 2013, IEEE Transactions on Power Electronics.

[13]  Murray Edington,et al.  An Automotive Onboard 3.3-kW Battery Charger for PHEV Application , 2012, IEEE Transactions on Vehicular Technology.

[14]  E. Santi,et al.  An assessment of wide bandgap semiconductors for power devices , 2003 .

[15]  S. Krishnaswami,et al.  An overview of Cree silicon carbide power devices , 2004, Power Electronics in Transportation (IEEE Cat. No.04TH8756).

[16]  Murray Edington,et al.  An automotive on-board 3.3 kW battery charger for PHEV application , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[17]  F.C. Lee,et al.  Design considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter , 1990, Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition.

[18]  H. Akagi,et al.  A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2007, IEEE Transactions on Power Electronics.

[19]  Alexander B. Lostetter,et al.  High Temperature Silicon Carbide Power Modules for High Performance Systems , 2011 .

[20]  Johann W. Kolar,et al.  Pareto-Optimal Design and Performance Mapping of Telecom Rectifier Concepts , 2010 .

[21]  Johann W. Kolar,et al.  SiC versus Si—Evaluation of Potentials for Performance Improvement of Inverter and DC–DC Converter Systems by SiC Power Semiconductors , 2011, IEEE Transactions on Industrial Electronics.

[22]  R. McMahon,et al.  Boost Converter With SiC JFETs: Comparison With CoolMOS and Tests at Elevated Case Temperature , 2013, IEEE Transactions on Power Electronics.

[23]  Honggang Sheng,et al.  Investigation of 1.2 kV SiC MOSFET for high frequency high power applications , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[24]  T. McNutt,et al.  Packaging of High Frequency, High Temperature Silicon Carbide (SiC) Multichip Power Module (MCPM) Bi-directional Battery Chargers for Next Generation Hybrid Electric Vehicles , 2012 .

[25]  Milan M. Jovanovic,et al.  Performance Evaluation of Bridgeless PFC Boost Rectifiers , 2007, IEEE Transactions on Power Electronics.

[26]  A. Kawamura,et al.  Efficiency optimization of high power density Dual Active Bridge DC-DC converter , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[27]  Prasad Enjeti,et al.  A high-performance single-phase rectifier with input power factor correction , 1996 .