Design of 100 muW Wireless Sensor Nodes on Energy Scavengers for Biomedical Monitoring

Wireless sensor nodes span a wide range of applications. This paper focuses on the biomedical area, more specifically on healthcare monitoring applications. Power dissipation is the dominant design constraint in this domain. This paper shows the different steps to develop a digital signal processing architecture for a single channel electrocardiogram application, which is used as an application example. We aim for less than 100µW power consumption as that is the power energy scavengers can deliver. We follow a bottleneck-driven approach, the following steps are applied: first the algorithm is tuned to the target processor, then coarse grained clock-gating is applied, next the static as well as the dynamic dissipation of the digital processor is reduced by tuning the core to the target domain. The impact of each step is quantified. A solution of around 11µW is possible for both radio and DSP with the electrocardiogram algorithm.

[1]  Willis J. Tompkins,et al.  A Real-Time QRS Detection Algorithm , 1985, IEEE Transactions on Biomedical Engineering.

[2]  H. Meyr,et al.  System-on-chip for communications: the dawn of ASIPs and the dusk of ASICs , 2003, 2003 IEEE Workshop on Signal Processing Systems (IEEE Cat. No.03TH8682).

[3]  K.S.J. Pister,et al.  An ultra-low energy microcontroller for Smart Dust wireless sensor networks , 2004, 2004 IEEE International Solid-State Circuits Conference (IEEE Cat. No.04CH37519).

[4]  Rajit Manohar,et al.  BitSNAP: dynamic significance compression for a low-energy sensor network asynchronous processor , 2005, 11th IEEE International Symposium on Asynchronous Circuits and Systems.

[5]  Paolo Fiorini,et al.  Human++: Emerging Technology for Body Area Networks , 2006, VLSI-SoC.

[6]  Paolo Fiorini,et al.  Human++: Emerging Technology for Body Area Networks , 2006, 2006 IFIP International Conference on Very Large Scale Integration.