An engineering approach to impact analysis of notched beams by conventional beam elements

A new method for dynamic analysis of pre-cracked three point bend specimens using conventional beam finite elements is presented. The model is evaluated for both static and dynamic situations with analytical solutions. The applicability of the method in fracture toughness determination is demonstrated by comparing the model predictions with impact experiments conducted on aluminum and polymeric materials.

[1]  W. Ostachowicz,et al.  Analysis of the effect of cracks on the natural frequencies of a cantilever beam , 1991 .

[2]  A. Barr,et al.  One-dimensional theory of cracked Bernoulli-Euler beams , 1984 .

[3]  A. Rosakis,et al.  Dynamic measurement of the J integral in ductile metals: Comparison of experimental and numerical techniques , 1990 .

[4]  S. Aoki,et al.  Simple formula for dynamic stress intensity factor of pre-cracked Charpy specimen , 1980 .

[5]  Andrew D. Dimarogonas,et al.  VIBRATION OF CRACKED SHAFTS IN BENDING , 1983 .

[6]  Wada Hitoshi.  Determination of dynamic fracture toughness for PMMA , 1992 .

[7]  J. G. Williams,et al.  The analysis of dynamic fracture using lumped mass-spring models , 1987 .

[8]  P. R. Marur,et al.  Influence of anvil supports and overhangs in dynamic analysis of three point bend testing , 1994 .

[9]  C. Sun,et al.  Transverse impact problems by higher order beam finite element , 1975 .

[10]  W. Goldsmith,et al.  Impact: the theory and physical behaviour of colliding solids. , 1960 .

[11]  G. Nash.  An analysis of the forces and bending moments generated during the notched beam impact test , 1969 .

[12]  H. Petroski.  Simple static and dynamic models for the cracked elastic beam , 1981 .

[13]  Mechanical Aspects of the Dynamic Tear Test , 1969 .

[14]  Y. Narkis.  Identification of Crack Location in Vibrating Simply Supported Beams , 1994 .

[15]  P. R. Marur,et al.  Two degrees of freedom modeling of precracked beams under impact , 1996 .

[16]  Noriyuki Miyazaki.  Application of line-spring model to dynamic stress intensity factor analysis of pre-cracked bending specimen , 1991 .

[17]  P. Gudmundson.  The dynamic behaviour of slender structures with cross-sectional cracks , 1983 .

[18]  C. Pierre,et al.  Free Vibrations of Beams With a Single-Edge Crack , 1994 .