论文信息 - A face-to-face chip stacking 7kV RMS digital isolator for automotive and industrial motor drive applications

A face-to-face chip stacking 7kV RMS digital isolator for automotive and industrial motor drive applications

A face-to-face chip stacking isolator structure, which makes it easy to enhance the insulation voltage, is proposed. Transmitter (Tx) and receiver (Rx) chips, each of which has a coil, are stacked and communicate through a magnetic coupling of the coils. The die attach film sandwiched by the two chips not only bonds the chips but also enhances the insulation voltage by taking advantage of its thickness. With test chips, the breakdown voltage of 7 kV RMS is demonstrated and >20-year lifetime with a working voltage of 1.5 kV is estimated by extrapolation of time-dependent dielectric breakdown results.

[1] Baoxing Chen,et al. Isolated half-bridge gate driver with integrated high-side supply , 2008, 2008 IEEE Power Electronics Specialists Conference.

[2] M HigginsRobert. TDDB evaluations and modeling of very high-voltage (10kV) capacitors , 2009, IRPS 2009.

[3] Tadashi Maeda,et al. A 2.5 kV Isolation 35 kV/us CMR 250 Mbps Digital Isolator in Standard CMOS With a Small Transformer Driving Technique , 2012, IEEE Journal of Solid-State Circuits.

[4] Joe W. McPherson,et al. Determination of the nature of molecular bonding in silica from time-dependent dielectric breakdown data , 2004 .

[5] Robert Higgins. TDDB evaluations and modeling of very high-voltage (10kV) capacitors , 2009, 2009 IEEE International Reliability Physics Symposium.