Energy reduction for a dual circuit cooling water system using advanced regulatory control

Various process utilities are used in the petrochemical industry as auxiliary variables to facilitate the addition/removal of energy to/from the process, power process equipment and inhibit unwanted reaction. Optimisation activities usually focus on the process itself or on the utility consumption though the generation and distribution of these utilities are often overlooked in this regard. Many utilities are prepared or generated far from the process plant and have to be transported or transmitted, giving rise to more losses and potential inefficiencies. To illustrate the potential benefit of utility optimisation, this paper explores the control of a dual circuit cooling water system with focus on energy reduction subject process constraints. This is accomplished through the development of an advanced regulatory control (ARC) and switching strategy which does not require the development of a system model, only rudimentary knowledge of the behaviour of the process and system constraints. The novelty of this manuscript lies in the fact that it demonstrates that significant energy savings can be obtained by applying ARC to a process utility containing both discrete and continuous dynamics. Furthermore, the proposed ARC strategy does not require a plant model, uses only existing plant equipment, and can be implemented on control system hardware commonly used in industry. The simulation results indicate energy saving potential in the region of 30% on the system under investigation.

[1]  Ian K. Craig,et al.  Modelling of a dual circuit induced draft cooling water system for control and optimisation purposes , 2015 .

[2]  Eduardo F. Camacho,et al.  Model predictive control techniques for hybrid systems , 2010, Annu. Rev. Control..

[3]  Lanny Robbins Distillation Control, Optimization, and Tuning: Fundamentals and Strategies , 2011 .

[4]  Thomas F. Edgar,et al.  Process Dynamics and Control , 1989 .

[5]  Alberto Bemporad,et al.  Control of systems integrating logic, dynamics, and constraints , 1999, Autom..

[6]  Ian Postlethwaite,et al.  Multivariable Feedback Control: Analysis and Design , 1996 .

[7]  Jiangfeng Zhang,et al.  Optimal sizing and operation of pumping systems to achieve energy efficiency and load shifting , 2012 .

[8]  Xiaohua Xia,et al.  Optimal control of operation efficiency of belt conveyor systems , 2010 .

[9]  Ian K. Craig,et al.  Modelling, validation, and control of an industrial fuel gas blending system☆ , 2011 .

[10]  Roula Inglesi-Lotz,et al.  South Africa’s electricity consumption: A sectoral decomposition analysis , 2011 .

[11]  Donal Finn,et al.  Generalised water flow rate control strategy for optimal part load operation of ground source heat pump systems , 2015 .

[12]  Xiaohua Xia,et al.  Optimal operation scheduling of a pumping station with multiple pumps , 2013 .

[13]  Jiangfeng Zhang,et al.  An optimal control model for load shifting—with application in the energy management of a colliery , 2009 .

[14]  Qun Chen,et al.  A direct optimal control strategy of variable speed pumps in heat exchanger networks and experimental validations , 2015 .

[15]  Nasrudin Abd Rahim,et al.  A review on compressed-air energy use and energy savings , 2010 .

[16]  X. Xia,et al.  Demand side management of photovoltaic-battery hybrid system , 2015 .

[17]  Patrik Thollander,et al.  An interdisciplinary perspective on industrial energy efficiency , 2010 .

[18]  Xiaohua Xia,et al.  Modeling and energy efficiency optimization of belt conveyors , 2011 .

[19]  Sigurd Skogestad,et al.  An industrial and academic perspective on plantwide control , 2011, Annu. Rev. Control..

[20]  Sigurd Skogestad,et al.  Plantwide controlA review and a new design procedure ” , 2013 .

[21]  Sigurd Skogestad,et al.  Control structure design for complete chemical plants , 2004, Comput. Chem. Eng..

[22]  David Q. Mayne,et al.  Model predictive control: Recent developments and future promise , 2014, Autom..

[23]  M. Siddhartha Bhatt,et al.  Energy audit case studies I—steam systems , 2000 .

[24]  J. Zhang,et al.  A model predictive control strategy for load shifting in a water pumping scheme with maximum demand charges , 2009, 2009 IEEE Bucharest PowerTech.

[25]  Béla G. Lipták,et al.  Instrument engineers' handbook , 2012 .

[26]  Ian K. Craig,et al.  Demand side management of a run-of-mine ore milling circuit , 2013 .

[27]  Ian K. Craig,et al.  Fuel gas blending benchmark for economic performance evaluation of advanced control and state estimation , 2012 .

[28]  Frauke Oldewurtel,et al.  Experimental analysis of model predictive control for an energy efficient building heating system , 2011 .