Numerical investigation of water dynamics in a novel proton exchange membrane fuel cell flow channel

Abstract Water dynamics in the flow channel of a proton exchange membrane fuel cell is significantly important to water management and removal. In this study, volume-of-fluid method is used to investigate numerically the three-dimensional water dynamics in a flow channel with a hydrophilic needle. It is found that water transport and dynamics in this novel flow channel are quite different from the conventional channel. Liquid water droplet, introduced on the electrode surface, is removed through capillary effect once touching the hydrophilic needle. This is desirable since the electrode surface becomes free of liquid water, avoiding the flooding and blockage of reactant gas transport into the electrode. Increasing the contact area between the water droplet and needle, through an increase in the diameter or length of the needle, can facilitate water removal from the electrode surface because of greater capillary effect, but it also increases the pressure drop in the channel due to greater blockage by the needle. Overall, the pressure drop in the modified channel is still small compared to the pressure drop in a serpentine flow channel, making the present approach viable for use in the conventional parallel flow channels for proton exchange membrane fuel cells.

[1]  Xianguo Li,et al.  Application of lattice Boltzmann method to a micro-scale flow simulation in the porous electrode of a PEM fuel cell , 2007 .

[2]  Partha P. Mukherjee,et al.  Impact of GDL structure and wettability on water management in polymer electrolyte fuel cells , 2007 .

[3]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[4]  Chao-Yang Wang,et al.  In situ water distribution measurements in a polymer electrolyte fuel cell , 2003 .

[5]  David L. Jacobson,et al.  In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells , 2004 .

[6]  Xianguo Li,et al.  Numerical investigations on liquid water removal from the porous gas diffusion layer by reactant flow , 2010 .

[7]  P. Sui,et al.  Three-dimensional numerical simulations of water droplet dynamics in a PEMFC gas channel , 2008 .

[8]  Shanhai Ge,et al.  A mathematical model for PEMFC in different flow modes , 2003 .

[9]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[10]  B. Yi,et al.  Effects of hydrophilic/hydrophobic properties on the water behavior in the micro-channels of a proton exchange membrane fuel cell , 2006 .

[11]  A. Weber,et al.  Transport in Polymer-Electrolyte Membranes II. Mathematical Model , 2004 .

[12]  Xianguo Li,et al.  Three‐dimensional simulation of water droplet movement in PEM fuel cell flow channels with hydrophilic surfaces , 2011 .

[13]  Hui Wen Ku,et al.  The optimal parameters estimation for rectangular cylinders installed transversely in the flow channel of PEMFC from a three-dimensional PEMFC model and the Taguchi method , 2011 .

[14]  Jinsheng Xiao,et al.  Characteristics of droplet and film water motion in the flow channels of polymer electrolyte membrane fuel cells , 2006 .

[15]  Shohji Tsushima,et al.  Magnetic Resonance Imaging of the Water Distribution within a Polymer Electrolyte Membrane in Fuel Cells , 2004 .

[16]  Biao Zhou,et al.  Liquid water transport in parallel serpentine channels with manifolds on cathode side of a PEM fuel cell stack , 2006 .

[17]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[18]  Horng-Wen Wu,et al.  Numerical predictions of a PEM fuel cell performance enhancement by a rectangular cylinder installed transversely in the flow channel , 2009 .

[19]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[20]  Biao Zhou,et al.  Effects of electrode wettabilities on liquid water behaviours in PEM fuel cell cathode , 2008 .

[21]  Biao Zhou,et al.  Accelerated Numerical Test of Liquid Behavior Across Gas Diffusion Layer in Proton Exchange Membrane Fuel Cell Cathode , 2008 .

[22]  Biao Zhou,et al.  Innovative gas diffusion layers and their water removal characteristics in PEM fuel cell cathode , 2007 .

[23]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[24]  Biao Zhou,et al.  Liquid water transport in straight micro-parallel-channels with manifolds for PEM fuel cell cathode , 2006 .

[25]  Feng-Yuan Zhang,et al.  Liquid Water Removal from a Polymer Electrolyte Fuel Cell , 2006 .

[26]  Sarit K. Das,et al.  The Performance Analysis of a Multi-Duct Proton Exchange Membrane Fuel Cell Cathode , 2008 .

[27]  Biao Zhou,et al.  Water behavior in serpentine micro-channel for proton exchange membrane fuel cell cathode , 2005 .

[28]  Ned Djilali,et al.  Numerical investigation of water droplet dynamics in a low-temperature fuel cell microchannel: Effect of channel geometry , 2010 .

[29]  Chao-Yang Wang,et al.  Visualization and quantification of cathode channel flooding in PEM fuel cells , 2009 .

[30]  M. Lai,et al.  Numerical study of water management in the air flow channel of a PEM fuel cell cathode , 2007 .

[31]  Xianguo Li,et al.  Water transport in polymer electrolyte membrane fuel cells , 2011 .

[32]  Liang Hao,et al.  Lattice Boltzmann simulations of anisotropic permeabilities in carbon paper gas diffusion layers , 2009 .

[33]  Chin-Tsan Wang,et al.  Novel biometric flow slab design for improvement of PEMFC performance , 2010 .

[34]  Jack S. Brenizer,et al.  Study of water distribution and transport in a polymer electrolyte fuel cell using neutron imaging , 2005 .

[35]  Xianguo Li,et al.  A comprehensive, consistent and systematic mathematical model of PEM fuel cells , 2009 .

[36]  Xianguo Li,et al.  Experimental investigations on liquid water removal from the gas diffusion layer by reactant flow in a PEM fuel cell , 2010 .

[37]  Xianguo Li,et al.  A flow channel design procedure for PEM fuel cells with effective water removal , 2007 .

[38]  Jianlu Zhang,et al.  Effects of Hardware Design and Operation Conditions on PEM Fuel Cell Water Flooding , 2010 .