Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube

An analytical model for the impulse of a single-cycle pulse detonation tube has been developed and validated against experimental data. The model is based on the pressure history at the thrust surface of the detonation tube. The pressure history is modeled by a constant pressure portion, followed by a decay due to gas expansion out of the tube. The duration and amplitude of the constant pressure portion is determined by analyzing the gasdynamics of the self-similar flow behind a steadily moving detonation wave within the tube. The gas expansion process is modeled using dimensional analysis and empirical observations. The model predictions are validated against direct experimental measurements in terms of impulse per unit volume, specific impulse, and thrust. Comparisons are given with estimates of the specific impulse based on numerical simulations. Impulse per unit volume and specific impulse calculations are carried out for a wide range of fuel–oxygen–nitrogen mixtures (including aviation fuels) of varying initial pressure, equivalence ratio, and nitrogen dilution. The effect of the initial temperature is also investigated. The trends observed are explained using a simple scaling analysis showing the dependency of the impulse on initial conditions and energy release in the mixture.

[1]  P. A. Thompson,et al.  Compressible Fluid Dynamics , 1972 .

[2]  D. Desbordes,et al.  Propulsive Performances of Pulsed Detonations , 1999 .

[3]  S.N.B. Murthy,et al.  Pulse Detonation Engine Theory And Concepts , 1996 .

[4]  Wolfgang Breitung,et al.  Evaluation of limits for effective flame acceleration in hydrogen mixtures , 2001 .

[5]  R. B. Morrison,et al.  Intermittent Detonation as a Thrust-Producing Mechanism , 1957 .

[6]  Vigor Yang,et al.  System Performance and Thermodynamic Cycle Analysis of Airbreathing Pulse Detonation Engines , 2003 .

[7]  V. I. Alekseev,et al.  Effect of scale on the onset of detonations , 2000 .

[8]  Takuma Endo,et al.  A Simplified Analysis on a Pulse Detonation Engine Model , 2002 .

[9]  Gopal Patnaik,et al.  COMPUTATIONAL STUDIES OF PULSE DETONATION ENGINES: A STATUS REPORT , 1999 .

[10]  E. T. Curran,et al.  Developments in High-Speed Vehicle Propulsion Systems , 1996 .

[11]  Joseph E. Shepherd,et al.  Effect of Porous Thrust Surfaces on Detonation Transition and Detonation Tube Impulse , 2004 .

[12]  Joseph E. Shepherd,et al.  On the Design of Pulse Detonation Engines , 2001 .

[13]  S. A. Zhdan,et al.  Reactive impulse from the explosion of a gas mixture in a semiinfinite space , 1994 .

[14]  Joseph E. Shepherd,et al.  Impulse Correlation for Partially Filled Detonation Tubes , 2004 .

[15]  Vigor Yang,et al.  Thrust Chamber Dynamics and Propulsive Performance of Single -Tube Pulse Detonation Engines , 2005 .

[16]  F. S. Sherman,et al.  Unsteady motion of continuous media , 1960 .

[17]  Joseph E. Shepherd,et al.  Erratum for "Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube" , 2004 .

[18]  I. I. Glass,et al.  Nonstationary flows and shock waves , 1994 .

[19]  J. J. Quirk,et al.  AMRITA: A computational facility (for CFD modelling) , 1998 .

[20]  Joseph E. Shepherd,et al.  Reply to Comment on "Analytical Model for the Impulse of Single Cycle Pulse Detonation Tube" by M. I. Radulescu and R. K. Hanson , 2004 .

[21]  K. Kailasanath.  Recent developments in the research on pulse detonation engines , 2002 .

[22]  H. Seifert,et al.  Rocket Propulsion Elements , 1963 .

[23]  C. R. Peterson,et al.  Mechanics And Thermodynamics Of Propulsion , 1965 .

[24]  W. C. Davis,et al.  Detonation: Theory and Experiment , 1979 .

[25]  Frederick R. Schauer,et al.  Detonation Initiation Studies and Performance Results for Pulsed Detonation Engine Applications , 2001 .

[26]  Takuma Endo,et al.  Pressure History at the Thrust Wall of a Simplified Pulse Detonation Engine , 2004 .

[27]  Joseph E. Shepherd,et al.  Reply to Comment on "Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube" by W.H. Heiser and D.T. Pratt , 2004 .

[28]  Eric Wintenberger,et al.  Application of steady and unsteady detonation waves to propulsion , 2004 .

[29]  Joseph E. Shepherd,et al.  Direct Experimental Impulse Measurements for Detonations and Deflagrations , 2001 .

[30]  William H. Heiser,et al.  Thermodynamic Cycle Analysis of Pulse Detonation Engines , 2002 .

[31]  P. Thibault,et al.  The effect of DDT distance on impulse in a detonation tube , 2001 .

[32]  John H. S. Lee,et al.  Dynamic Parameters of Gaseous Detonations , 1984 .

[33]  Geoffrey Ingram Taylor,et al.  The dynamics of the combustion products behind plane and spherical detonation fronts in explosives , 1950, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[34]  F. Lu,et al.  Comparison of Detonation Processes in a Variable Cross Section Chamber and a Simple Tube , 2005 .

[35]  William H. Heiser,et al.  Comment on "Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube , 2004 .

[36]  Ronald K. Hanson,et al.  Comment on "Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube" , 2004 .

[37]  J.-L. Cambier,et al.  Strategies for Pulsed Detonation Engine Performance Optimization , 1998 .

[38]  Kailas Kailasanath,et al.  Performance estimates of pulsed detonation engines , 2000 .

[39]  W. C. Reynolds,et al.  The Element Potential Method for Chemical Equilibrium Analysis : Implementation in the Interactive Program STANJAN, Version 3 , 1986 .

[40]  Kaveh Ghorbanian,et al.  Numerical investigations of pulse detonation wave engines , 1995 .

[41]  Thomas R. A. Bussing,et al.  Practical Implementation Of Pulse Detonations Engines , 1997 .