Pulped Phormium tenax leaf fibres as reinforcement for epoxy composites

Abstract Leaf fibres from Phormium tenax (harakeke, New Zealand flax) were pulped at 170 °C with NaOH and anthraquinone. The pulp was wet laid to form mats, which were used to reinforce epoxy composites. The flexural modulus was almost as high as that measured for epoxy reinforced with glass chopped strand mat at the same weight fraction. The flexural strength was two-thirds that of the glass-reinforced composite. Failure was abrupt. SEM images showed torn fragments of fibre cell walls protruding from the fracture surface, indicating strong interfacial bonding. Good mechanical performance was attributed to the rarity of kink bands in the individual fibre cells, along with wrinkled cell-wall surfaces that enhanced the area of the fibre–matrix interface.

[1]  M. Hautala,et al.  Use of hemp and flax in composite manufacture: a search for new production methods , 2004 .

[2]  R M Rowell,et al.  Utilization of by-products from the tequila industry. Part 2: Potential value of Agave tequilana Weber azul leaves. , 2001, Bioresource technology.

[3]  Manjusri Misra,et al.  A Review on Pineapple Leaf Fibers, Sisal Fibers and Their Biocomposites , 2004 .

[4]  Sabu Thomas,et al.  Mechanical properties of pineapple leaf fiber‐reinforced polyester composites , 1997 .

[5]  Moniek E. Bucquoye,et al.  New composite materials from natural hard fibers , 1981 .

[6]  C. Hill,et al.  RTM Hemp Fibre-Reinforced Polyester Composites , 2000 .

[7]  Z. Zainuddin,et al.  Effect of pulping variables on the characteristics of oil-palm frond-fiber. , 2004, Bioresource technology.

[8]  Jose Maria Kenny,et al.  Characterization of Composites Based on Natural and Glass Fibers Obtained by Vacuum Infusion , 2005 .

[9]  D. Hull,et al.  Fractography: Observing, Measuring and Interpreting Fracture Surface Topography , 1999 .

[10]  P. Wambua,et al.  Natural fibres: can they replace glass in fibre reinforced plastics? , 2001 .

[11]  C. Baley.  Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase , 2002 .

[12]  J L Ferrer,et al.  Optimization of pulping conditions of abaca. An alternative raw material for producing cellulose pulp. , 2005, Bioresource technology.

[13]  G. Unnikrishnan,et al.  A comparative study on mechanical properties of sisal-leaf fibre-reinforced polyester composites prepared by resin transfer and compression moulding techniques , 2007 .

[14]  B. Lamy,et al.  Influence of fiber defects on the stiffness properties of flax fibers-epoxy composite materials , 2002 .

[15]  Amar K. Mohanty,et al.  Potentiality of Pineapple Leaf Fibre as Reinforcement in PALF-Polyester Composite: Surface Modification and Mechanical Performance , 2001 .

[16]  I. Mondragon,et al.  Surface modification of sisal fibers: Effects on the mechanical and thermal properties of their epoxy composites , 2005 .

[17]  R. Pettersen.  Wood Sugar Analysis by Anion Chromatography , 1991 .

[18]  J. Vincent,et al.  The manufacture and mechanical testing of thermosetting natural fibre composites , 2000 .

[19]  A. J. Norton,et al.  Structural biocomposites from flax-Part I: Effect of bio-technical fibre modification on composite properties , 2006 .

[20]  H. Bos,et al.  Compressive behaviour of unidirectional flax fibre reinforced composites , 2004 .

[21]  B. Singh,et al.  Influence of fiber surface treatment on the properties of sisal-polyester composites , 1996 .

[22]  Sabu Thomas,et al.  Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites , 2005 .

[23]  J. M. Macleod,et al.  Alkaline pulping with additives. A review , 1980, Wood Science and Technology.

[24]  F. Poncin‐Epaillard,et al.  Unsaturated polyester composites reinforced with flax fibers: effect of cold plasma and autoclave treatments on mechanical and permeation properties , 2005 .

[25]  J. Sugiyama,et al.  Electron diffraction study on the two crystalline phases occurring in native cellulose from an algal cell wall , 1991 .

[26]  Yan Li,et al.  Sisal fibre and its composites: a review of recent developments , 2000 .

[27]  Martin P. Ansell,et al.  The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites , 1991 .