Steady-State Modeling and Analysis of a Double-Sided Interior Permanent-Magnet Flat Linear Brushless Motor With Slot-Phase Shift and Alternate Teeth Windings

Analytic modeling techniques of a double-sided interior permanent-magnet flat linear brushless motor (IPM-FLBM) with slot-phase shift and alternate teeth windings are proposed in this paper. Since the buried-type IPM-FLBM with the slot-phase shift and alternate teeth windings is fairly new compared with conventional linear motors, little research has been previously done in modeling and analysis. The analytic models presented in this paper provide the effective and reliable methods for this new type of linear motor. For this purpose, a simplified magnetic equivalent circuit and superposed winding function are investigated. A variable winding function is newly developed in order to evaluate the inductances of the salient motor with the alternate teeth windings. All analytic models are verified with 3-D finite-element analyses (FEAs) step by step. The steady-state thrust force is modeled using a classical closed-form solution for linear brushless ac motors. The static end-effect and cogging forces for the ripple force evaluation are investigated using FEA. The validities for performance parameters are demonstrated experimentally.

[1]  Yun-Hyun Cho,et al.  Investigation of Auxiliary Poles Design Criteria on Reduction of End Effect of Detent Force for PMLSM , 2009, IEEE Transactions on Magnetics.

[2]  Koen J Meessen,et al.  Modeling and Experimental Verification of a Tubular Actuator for 20-g Acceleration in a Pick-and-Place Application , 2010, IEEE Transactions on Industry Applications.

[3]  A. Ecklebe,et al.  A novel approach for 3d air gap reluctance calculations , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[4]  Jacek F. Gieras,et al.  Topologies and Selection , 2018 .

[5]  J. H. J. Potgieter,et al.  Evaluation of calculation methods and the effect of end-winding inductance on the performance of non overlap winding PM machines , 2012, 2012 XXth International Conference on Electrical Machines.

[6]  Masayuki Sanada,et al.  Interior permanent magnet linear synchronous motor for high performance drives , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[7]  S. Vaez-Zadeh,et al.  An Improved Magnetic Equivalent Circuit Model for Iron-Core Linear Permanent-Magnet Synchronous Motors , 2010, IEEE Transactions on Magnetics.

[8]  M. J. Hoeijmakers,et al.  Modeling of a linear PM Machine including magnetic saturation and end effects: maximum force-to-current ratio , 2003 .

[9]  T.A. Lipo,et al.  Design and comparison of linear synchronous motor and linear induction motor for electromagnetic aircraft launch system , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[10]  Tze-Fun Chan,et al.  Synchronous Machines , 2011, Electrical Machine Fundamentals with Numerical Simulation using MATLAB/SIMULINK.

[11]  Nicola Bianchi,et al.  Design criteria of a tubular linear IPM motor , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[12]  Hamid A. Toliyat,et al.  A novel method for modeling dynamic air-gap eccentricity in synchronous machines based on modified winding function theory , 1998 .

[13]  Antje Winkel.  Vector Control And Dynamics Of Ac Drives , 2016 .

[14]  D. C. J. Krop,et al.  Analysis of a novel double sided flux switching linear motor topology , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[15]  Chang Seop Koh,et al.  A New Cogging-Free Permanent-Magnet Linear Motor , 2008, IEEE Transactions on Magnetics.

[16]  D. Howe,et al.  Analysis and design optimization of an improved axially magnetized tubular permanent-magnet machine , 2004, IEEE Transactions on Energy Conversion.

[17]  W. Joines,et al.  Air-gap reluctance and inductance calculations for magnetic circuits using a Schwarz-Christoffel transformation , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[18]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting , 1993 .

[19]  Thomas A. Lipo,et al.  Analysis of Synchronous Machines , 2008 .

[20]  Z.Q. Zhu,et al.  Comparison of PM brushless motors, having either all teeth or alternate teeth wound , 2006, IEEE Transactions on Energy Conversion.

[21]  D.C.J. Krop,et al.  Application of Schwarz-Christoffel Mapping to Permanent-Magnet Linear Motor Analysis , 2008, IEEE Transactions on Magnetics.

[22]  Won-jong Kim,et al.  Detent-Force Minimization of Double-Sided Interior Permanent-Magnet Flat Linear Brushless Motor , 2016, IEEE Transactions on Magnetics.