Quantization Noise Minimization in ΣΔ-modulation based RF Transmitter Architectures

This paper describes an optimization method for minimization of quantization noise in ΣΔ-based RF transmitters. The aim of the method is to enable the use of reconstruction filters with wider passband, or alternatively, a lower switch-rate. The method uses a general representation of the ΣΔconverters in combination with a differentiable approximation of the quantizer. Based on this, a Monte-Carlo based algorithm is developed around the damped Gauss-Newton iteration. As a result of the suggested algorithm, the residual quantization noise after reconstruction filtering is significantly decreased. Finally, simulations using a bandlimited signal with a Gaussian distribution are used to demonstrate the capabilities of the suggested algorithm when applied with the proposed ΣΔ-modulator representation. The resulting performance is compared to several cases of ΣΔ-converters designed using traditional methods, demonstrating significant improvements in terms of reduced reconstruction normalized mean square error (NMSE). This implicates that the transmitter efficiency can be improved with minor changes in the modulator implementation.

[1]  Peter Singerl,et al.  Coding efficiency for different switched-mode RF transmitter architectures , 2009, 2009 52nd IEEE International Midwest Symposium on Circuits and Systems.

[2]  K. Mekechuk,et al.  Asynchronous modulator for linearization and switch-mode RF power amplifier applications , 2009, 2009 IEEE Radio Frequency Integrated Circuits Symposium.

[3]  Peter B. Kenington.  RF and Baseband Techniques for Software Defined Radio , 2005 .

[4]  F. Raab,et al.  Radio Frequency Pulsewidth Modulation , 1973, IEEE Trans. Commun..

[5]  Richard Schreier.  An Empirical Study of High-Order , 1993 .

[6]  H. Chireix.  High Power Outphasing Modulation , 1935, Proceedings of the Institute of Radio Engineers.

[7]  Gabor C. Temes,et al.  Oversampling delta-sigma data converters : theory, design, and simulation , 1992 .

[8]  T. Matsuura,et al.  A high efficiency transmitter with a delta-sigma modulator and a noise cancellation circuit , 2005, 7th European Conference on Wireless Technology, 2004..

[9]  R. Schreier,et al.  Delta-sigma data converters : theory, design, and simulation , 1997 .

[10]  Christian Fager,et al.  A general method for passband quantization noise suppression in pulsed transmitter architectures , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[11]  Oliver M. Collins,et al.  An Optimization Approach to Single-Bit Quantization , 2009, IEEE Transactions on Circuits and Systems I: Regular Papers.

[12]  Sudhakar Pamarti,et al.  Statistics of the Quantization Noise in 1-Bit Dithered Single-Quantizer Digital Delta–Sigma Modulators , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[13]  K. H. Barratt.  Digital Coding of Waveforms , 1985 .

[14]  Gabor C. Temes,et al.  Understanding Delta-Sigma Data Converters , 2004 .

[15]  Shawn Patrick Stapleton,et al.  Comparison of Bandpass Modulator Coding Efficiency With a Periodic Signal Model , 2008 .

[16]  Didier Belot,et al.  A transmitter architecture for nonconstant envelope modulation , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[17]  Frederick H. Raab,et al.  RF and Microwave Power Amplifier and Transmitter Technologies — Part 5 , 2004 .

[18]  F.H. Raab,et al.  Split-band modulator for Kahn-technique transmitters , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[19]  W.H. Doherty,et al.  A New High Efficiency Power Amplifier for Modulated Waves , 1936, Proceedings of the Institute of Radio Engineers.