A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I

The application of indentation techniques to the evaluation of fracture toughness is examined critically, in two parts. In this first part, attention is focused on an approach which involves direct measurement of Vickers-produced radial cracks as a function of indentation load. A theoretical basis for the method is first established, in terms of elastic/plastic indentation fracture mechanics. It is thereby asserted that the key to the radial crack response lies in the residual component of the contact field. This residual term has important implications concerning the crack evolution, including the possibility of post indentation slow growth under environment-sensitive conditions. Fractographic observations of cracks in selected “reference” materials are used to determine the magnitude of this effect and to investigate other potential complications associated with departures from ideal indentation fracture behavior. The data from these observations provide a convenient calibration of the Indentation toughness equations for general application to other well-behaved ceramics. The technique is uniquely simple in procedure and economic in its use of material.

[1]  B. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II, Strength Method , 1981 .

[2]  A. Evans,et al.  Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System , 1980 .

[3]  Brian R. Lawn,et al.  Residual stress effects in sharp contact cracking , 1979 .

[4]  B. Lawn,et al.  Hardness, Toughness, and Brittleness: An Indentation Analysis , 1979 .

[5]  Michael V. Swain,et al.  Indentation deformation/fracture of normal and anomalous glasses , 1979 .

[6]  A. Evans,et al.  A model for crack initiation in elastic/plastic indentation fields , 1977 .

[7]  J. Suiter,et al.  On the indentation fracture of cemented carbide part 1 — Survey of operative fracture modes , 1977 .

[8]  B. Lawn,et al.  An Indentation Technique for Measuring Stresses in Tempered Glass Surfaces , 1977 .

[9]  M. Swain.  A note on the residual stress about a pointed indentation impression in a brittle solid , 1976 .

[10]  Michael V. Swain,et al.  Indentation plasticity and the ensuing fracture of glass , 1976 .

[11]  T. R. Wilshaw,et al.  Quasi-static solid particle damage in brittle solids—I. Observations analysis and implications , 1976 .

[12]  E. A. Charles,et al.  Fracture Toughness Determinations by Indentation , 1976 .

[13]  J. Petrovic,et al.  Controlled surface-flaw-initiated fracture in reaction-bonded Si3N4 , 1976 .

[14]  J. Petrovic,et al.  Prediction of fracture-surface energy from microhardness indentation in structural ceramics , 1976 .

[15]  Stress corrosion cracking of a 6% cobalt/ tungsten carbide hard metal , 1976 .

[16]  J. Petrovic,et al.  Effects of Residual Stresses on Fracture from Controlled Surface Flaws , 1976 .

[17]  P. Beardmore,et al.  On techniques for emplacing small cracks of controlled size in brittle solids , 1975 .

[18]  B. Lawn,et al.  Indentation fracture: principles and applications , 1975 .

[19]  J. J. Petrovic,et al.  Controlled Surface Flaws in Hot‐Pressed SiC , 1975 .

[20]  T. I. Barry,et al.  Hertzian fracture of glass ceramics , 1975 .

[21]  B. Lawn,et al.  A comparative study of the fracture of various silica modifications using the Hertzian test , 1973 .

[22]  Sheldon M. Wiederhorn,et al.  Fracture Surface Energy of Glass , 1969 .

[23]  Sheldon M. Wiederhorn,et al.  Critical Analysis of the Theory of the Double Cantilever Method of Measuring Fracture‐Surface Energies , 1968 .

[24]  B. Lawn,et al.  On the theory of Hertzian fracture , 1967, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[25]  D. Tabor.  Hardness of Metals , 1937, Nature.