Design and Analysis of Magnetic-Assisted Transfer Printing
暂无分享,去创建一个
Huanyu Cheng | Xudong Yu | Huaping Wu | Honglei Zhou | Xudong Yu | Huanyu Cheng | Huaping Wu | Honglei Zhou | Qinming Yu | Furong Chen | Furong Chen | Qinming Yu | Q. Yu
[1] Huanyu Cheng,et al. Shear-enhanced adhesiveless transfer printing for use in deterministic materials assembly , 2011 .
[2] John A. Rogers,et al. Mechanics of reversible adhesion , 2011 .
[3] Yihui Zhang,et al. Mechanics of Fractal-Inspired Horseshoe Microstructures for Applications in Stretchable Electronics , 2016 .
[4] Rui Li,et al. An Accurate Thermomechanical Model for Laser-Driven Microtransfer Printing , 2017 .
[5] Huanyu Cheng,et al. Biodegradable elastomers and silicon nanomembranes/nanoribbons for stretchable, transient electronics, and biosensors. , 2015, Nano letters.
[6] Yihui Zhang,et al. A mechanics model of soft network materials with periodic lattices of arbitrarily shaped filamentary microstructures for tunable Poisson's ratios , 2018 .
[7] Lei Wang,et al. Multi-terminal transport measurements of MoS2 using a van der Waals heterostructure device platform. , 2015, Nature nanotechnology.
[8] D. Fang,et al. In Plane Mechanical Properties of Tetrachiral and Antitetrachiral Hybrid Metastructures , 2017 .
[9] J. Maas,et al. Experimental and theoretical analysis of the actuation behavior of magnetoactive elastomers , 2016 .
[10] Raeed H. Chowdhury,et al. Epidermal Electronics , 2011, Science.
[11] Huanyu Cheng,et al. Assembly of Heterogeneous Materials for Biology and Electronics: From Bio-Inspiration to Bio-Integration , 2017 .
[12] Ravinder Dahiya,et al. Flexible MISFET Devices From Transfer Printed Si Microwires and Spray Coating , 2016, IEEE Journal of the Electron Devices Society.
[13] Kyung-In Jang,et al. 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium , 2014, Nature Communications.
[14] Robert Sheridan,et al. Numerical simulation and experimental validation of the large deformation bending and folding behavior of magneto-active elastomer composites , 2014 .
[15] Jie Song,et al. A general method for transferring graphene onto soft surfaces. , 2013, Nature nanotechnology.
[16] Nathaniel S. Hwang,et al. Multifunctional cell-culture platform for aligned cell sheet monitoring, transfer printing, and therapy. , 2015, ACS nano.
[17] John A Rogers,et al. Competing fracture in kinetically controlled transfer printing. , 2007, Langmuir : the ACS journal of surfaces and colloids.
[18] Cunjiang Yu,et al. High Fidelity Tape Transfer Printing Based On Chemically Induced Adhesive Strength Modulation , 2015, Scientific Reports.
[19] Yonggang Huang,et al. Transfer printing by kinetic control of adhesion to an elastomeric stamp , 2006 .
[20] Alexandra G Martinez,et al. Electrochemical sensing based on printable temporary transfer tattoos. , 2012, Chemical communications.
[21] Seungwoo Lee,et al. Heterogeneously Assembled Metamaterials and Metadevices via 3D Modular Transfer Printing , 2016, Scientific Reports.
[22] Yonggang Huang,et al. Materials and Mechanics for Stretchable Electronics , 2010, Science.
[23] Ha Uk Chung,et al. Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling , 2015, Science.
[24] Audrey M. Bowen,et al. Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication , 2012, Advanced materials.
[25] Werner Karl Schomburg,et al. Introduction to Microsystem Design , 2011 .
[26] Jianhua Hao,et al. Magnetic‐Assisted Noncontact Triboelectric Nanogenerator Converting Mechanical Energy into Electricity and Light Emissions , 2016, Advanced materials.
[27] Mu Chiao,et al. A magnetic poly(dimethylesiloxane) composite membrane incorporated with uniformly dispersed, coated iron oxide nanoparticles , 2009 .
[28] Hyunhyub Ko,et al. Ultrathin compound semiconductor on insulator layers for high-performance nanoscale transistors , 2010, Nature.
[29] Zhao Yanzheng,et al. Bio-inspired Miniature Suction Cups Actuated by Shape Memory Alloy , 2009 .
[30] Huanyu Cheng,et al. A Physically Transient Form of Silicon Electronics , 2012, Science.
[31] Placid Mathew Ferreira,et al. Active, Programmable Elastomeric Surfaces with Tunable Adhesion for Deterministic Assembly by Transfer Printing , 2012 .
[32] M. Chiao,et al. A magnetically controlled MEMS device for drug delivery: design, fabrication, and testing. , 2011, Lab on a chip.
[33] N. Lu,et al. Elasticity Solutions to Nonbuckling Serpentine Ribbons , 2017 .
[34] Mary Frecker,et al. Finite element analysis and validation of dielectric elastomer actuators used for active origami , 2014 .
[35] Jiangtao Wu,et al. Three-Dimensional-Printed Multistable Mechanical Metamaterials With a Deterministic Deformation Sequence , 2017 .
[36] Seyoung Kee,et al. Highly Conductive All‐Plastic Electrodes Fabricated Using a Novel Chemically Controlled Transfer‐Printing Method , 2015, Advanced materials.
[37] John A. Rogers,et al. A theoretical model of reversible adhesion in shape memory surface relief structures and its application in transfer printing , 2015 .
[38] Huanyu Cheng,et al. An analytical model for shear-enhanced adhesiveless transfer printing , 2012 .
[39] Youngjin Park,et al. A wet-tolerant adhesive patch inspired by protuberances in suction cups of octopi , 2017, Nature.
[40] Yonggang Huang,et al. Waterproof AlInGaP optoelectronics on stretchable substrates with applications in biomedicine and robotics. , 2010, Nature materials.
[41] Yihui Zhang,et al. A Computational Model of Bio-Inspired Soft Network Materials for Analyzing Their Anisotropic Mechanical Properties , 2018 .
[42] Huanyu Cheng,et al. A finite-deformation mechanics theory for kinetically controlled transfer printing , 2013 .
[43] Seok Kim,et al. Microstructured shape memory polymer surfaces with reversible dry adhesion. , 2013, ACS applied materials & interfaces.
[44] Jianliang Xiao,et al. Third-Order Polynomials Model for Analyzing Multilayer Hard/Soft Materials in Flexible Electronics , 2016 .
[45] Jake J. Abbott,et al. Modeling Magnetic Torque and Force for Controlled Manipulation of Soft-Magnetic Bodies , 2007, IEEE Transactions on Robotics.
[46] Rui Li,et al. Thermo-mechanical modeling of laser-driven non-contact transfer printing: two-dimensional analysis , 2012 .
[47] Hyunhyub Ko,et al. Octopus‐Inspired Smart Adhesive Pads for Transfer Printing of Semiconducting Nanomembranes , 2016, Advanced materials.
[48] Huanyu Cheng,et al. 25th Anniversary Article: Materials for High‐Performance Biodegradable Semiconductor Devices , 2014, Advanced materials.
[49] Weisong Wang,et al. Composite elastic magnet films with hard magnetic feature , 2004 .