Assessment of wear properties on low temperature molten salt bath nitriding on austenitic stainless steel

[1]  S. Kailas,et al.  Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders , 2012 .

[2]  A. Perumal,et al.  Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar , 2012 .

[3]  A. Gajek,et al.  Behaviour of hydrogen in gas nitrided iron studied by electrochemical permeation and desorption techniques , 2012 .

[4]  K. Rajam,et al.  Electrochemical studies of stainless steel implanted with nitrogen and oxygen by plasma immersion ion implantation , 2007 .

[5]  A. P. Tschiptschin,et al.  Cavitation erosion resistance of a high temperature gas nitrided duplex stainless steel in substitute ocean water , 2005 .

[6]  F. Borgioli,et al.  Glow discharge nitriding of AISI 316L austenitic stainless steel: Influence of treatment pressure , 2006 .

[7]  V. Gavriljuk,et al.  Concept of a new high-strength austenitic stainless steel , 2002 .

[8]  Myung-Ho Kim,et al.  Effects of pulse frequency and temperature on the nitride layer and surface characteristics of plasma nitrided stainless steel , 2001 .

[9]  H. Spies,et al.  Plasma nitriding of stainless steels at low temperatures , 1999 .

[10]  W. Lee,et al.  Surface hardening of AISI 316L stainless steel using plasma carburizing , 1997 .

[11]  A. Rosen,et al.  The influence of the nitriding process on the dry wear resistance of 15-5 PH stainless steel , 1986 .