Synthesis of prepolymerization stage in polycondensation processes

A systematic design procedure of the prepolymerization stage of a polycondensation process is presented. This procedure treats polycondensation processes as reactive separation processes and offers an alternative to design through simulations. Feasible flowsheets and operating conditions are developed by analyzing the phase behavior of polycondensation systems at thermodynamic equilibrium. Functional end groups and apparent mole fractions are used to represent reaction kinetics and equilibrium, and real mole fractions are used to represent phase equilibrium. Reactive phase diagrams are plotted in transformed mole-fraction space to facilitate visualization of the phase behavior. Three examples are presented: manufacture of polyethylene terephthalate (PET) from dimethyl terephthalate (DMT) and ethylene glycol (EG), from terephthalic acid (TPA) and EG, and manufacture of nylon-6,6. For these processes, the results of the approach agree excellently with detailed iterative performance simulations. The approach also reveals additional feasible process alternatives and corresponding operating conditions.

[1]  K. Ravindranath,et al.  Modeling of poly(ethylene terephthalate) reactors. I. A semibatch ester interchange reactor , 1981 .

[2]  H. H. Lee,et al.  Transient and steady-state behavior of wiped-film reactors for reversible condensation polymerization , 1996 .

[3]  Michael F. Doherty,et al.  Synthesis of Reactive Distillation Systems with Multiple Equilibrium Chemical Reactions , 1995 .

[4]  Ka Ming Ng,et al.  Effect of kinetics and mass transfer on design of extractive reaction processes , 1998 .

[5]  K. Choi,et al.  Melt transesterification of dimethyl terephthalate with ethylene glycol , 1989 .

[6]  Cláudio Augusto Oller do Nascimento,et al.  Transient experiments and mathematical modeling of an industrial twin-screw extruder reactor for nylon-6,6 polymerization , 1997 .

[7]  K. Ravindranath,et al.  Polyethylene terephthalate—II. Engineering analysis , 1986 .

[8]  J. S. Vrentas,et al.  Thermodynamic properties of some amorphous polymer-solvent systems , 1983 .

[9]  K. Ravindranath,et al.  Modeling of poly(ethylene terephthalate) reactors. II. A continuous transesterification process , 1982 .

[10]  Bill Curtis,et al.  Process modeling , 1992, CACM.

[11]  Michael F. Malone,et al.  Effect of kinetics on residue curve maps for reactive distillation , 1994 .

[12]  Michael F. Doherty,et al.  Necessary and sufficient conditions for reactive azeotropes in multireaction mixtures , 1995 .

[13]  K. Ravindranath,et al.  Modeling of poly(ethylene terephthalate) reactors: 4. A continuous esterification process , 1982 .

[14]  S. Gupta,et al.  Simulation of reversible nylon-6,6 polymerization , 1981 .

[15]  M. Doherty,et al.  Vapor-liquid phase equilibrium in systems with multiple chemical reactions , 1995 .

[16]  Ka Ming Ng,et al.  Synthesis of extractive reaction processes , 1998 .

[17]  Anil Kumar,et al.  Reaction Engineering of Step Growth Polymerization , 1987 .

[18]  K. Ravindranath,et al.  Polyethylene terephthalate—I. Chemistry, thermodynamics and transport properties , 1986 .

[19]  K. Choi.  A modeling of semibatch reactors for melt transesterification of dimethyl terephthalate with ethylene glycol , 1987 .

[20]  Ka Ming Ng,et al.  Synthesis of reactive crystallization processes , 1997 .

[21]  K. Choi,et al.  IDENTIFICATION AND CHARACTERIZATION OF REACTION BYPRODUCTS IN THE POLYMERIZATION OF POLYETHYLENE TEREPHTHALATE , 1989 .

[22]  W. H. Ray,et al.  Unified Modeling for Polycondensation Kinetics , 1992 .

[23]  M. F. Malone,et al.  Attainable regions for reaction with separation , 1997 .