A power-optimal repeater insertion methodology for global interconnects in nanometer designs

This paper addresses the problem of power dissipation during the buffer insertion phase of interconnect performance optimization. It is shown that the interconnect delay is actually very shallow with respect to both the repeater size and separation close to the minimum point. A methodology is developed to calculate the repeater size and interconnect length which minimizes the total interconnect power dissipation for any given delay penalty. This methodology is used to calculate the power-optimal buffering schemes for various ITRS technology nodes for 5% delay penalty. Furthermore, this methodology is also used to quantify the relative importance of the various components of the power dissipation for power-optimal solutions for various technology nodes.

[1]  Takayasu Sakurai.  Design challenges for 0.1um and beyond: embedded tutorial , 2000, ASP-DAC '00.

[2]  Eby G. Friedman,et al.  Repeater design to reduce delay and power in resistive interconnect , 1997, Proceedings of 1997 IEEE International Symposium on Circuits and Systems. Circuits and Systems in the Information Age ISCAS '97.

[3]  H. B. Bakoglu,et al.  Circuits, interconnections, and packaging for VLSI , 1990 .

[4]  P.P. Gelsinger,et al.  Microprocessors for the new millennium: Challenges, opportunities, and new frontiers , 2001, 2001 IEEE International Solid-State Circuits Conference. Digest of Technical Papers. ISSCC (Cat. No.01CH37177).

[5]  Wayne Burleson,et al.  A practical approach to DSM repeater insertion: satisfying delay constraints while minimizing area and power , 2001, Proceedings 14th Annual IEEE International ASIC/SOC Conference (IEEE Cat. No.01TH8558).

[6]  Hiroshi Kawaguchi,et al.  A reduced clock-swing flip-flop (RCSFF) for 63% power reduction , 1998, IEEE J. Solid State Circuits.

[7]  Takayasu Sakurai,et al.  Analysis and future trend of short-circuit power , 2000, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[8]  Kaustav Banerjee,et al.  3-D ICs: a novel chip design for improving deep-submicrometer interconnect performance and systems-on-chip integration , 2001, Proc. IEEE.

[9]  Vivek De,et al.  Technology and design challenges for low power and high performance [microprocessors] , 1999, Proceedings. 1999 International Symposium on Low Power Electronics and Design (Cat. No.99TH8477).

[10]  K. Banerjee,et al.  Accurate analysis of on-chip inductance effects and implications for optimal repeater insertion and technology scaling , 2001, 2001 Symposium on VLSI Circuits. Digest of Technical Papers (IEEE Cat. No.01CH37185).

[11]  Alberto L. Sangiovanni-Vincentelli,et al.  On thermal effects in deep sub-micron VLSI interconnects , 1999, DAC '99.

[12]  Jason Cong,et al.  An efficient technique for device and interconnect optimization in deep submicron designs , 1998, ISPD '98.

[13]  Kaustav Banerjee,et al.  Analysis of on-chip inductance effects for distributed RLC interconnects , 2002, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[14]  T. Sakurai.  Design challenges for 0.1 um and beyond , 2000, Proceedings 2000. Design Automation Conference. (IEEE Cat. No.00CH37106).

[15]  Jacob K. White,et al.  FastCap: a multipole accelerated 3-D capacitance extraction program , 1991, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[16]  Anantha P. Chandrakasan,et al.  Sources of Power Consumption , 1995 .