The thermal and mechanical properties of a polyurethane/multi-walled carbon nanotube composite

A polyurethane/multi-walled carbon nanotube elastomer composite was synthesized. The microstructure of the composite was examined by field-emission scanning electron microscopy and transmission electron microscopy. The thermal and mechanical properties of the composite were characterized by dynamic mechanical thermal analysis, thermogravimetric analysis and tensile testing. The chemical linkage of carbon nanotubes with polyurethane matrix was confirmed by Fourier transform infrared spectra. The study on the structure of the composite showed that carbon nanotubes could be dispersed in the polymer matrix well apart from a few of clusters. The results from thermal analysis indicated that the glass transition temperature of the composite was increased by about 10 °C and its thermal stability was obviously improved, in comparison with pure polyurethane. The investigation on the mechanical properties showed that the modulus and tensile strength could be obviously increased by adding 2 wt% (by weight) CNT to the matrix.

[1]  T. Ichihashi,et al.  Single-shell carbon nanotubes of 1-nm diameter , 1993, Nature.

[2]  O. Zhou,et al.  Anisotropic magnetic susceptibility of multiwalled carbon nanotubes , 2000 .

[3]  Serge Lefrant,et al.  Polyaniline and Carbon Nanotubes Based Composites Containing Whole Units and Fragments of Nanotubes , 2003 .

[4]  R. Tannenbaum,et al.  Polymer‐Mediated Alignment of Carbon Nanotubes under High Magnetic Fields , 2003 .

[5]  Daoben Zhu,et al.  Reduction of solubilized multi-walled carbon nanotubes , 2003 .

[6]  D. P. Anderson,et al.  Purification process for single-wall carbon nanotubes , 2003 .

[7]  Ya‐Ping Sun,et al.  Sonication-Assisted Functionalization and Solubilization of Carbon Nanotubes , 2002 .

[8]  P. Pehrsson,et al.  Water-soluble and optically pH-sensitive single-walled carbon nanotubes from surface modification. , 2002, Journal of the American Chemical Society.

[9]  Linda S. Schadler,et al.  Surface modification of multiwalled carbon nanotubes: Toward the tailoring of the interface in polymer composites , 2003 .

[10]  Richard W. Siegel,et al.  Selective Attachment of Gold Nanoparticles to Nitrogen-Doped Carbon Nanotubes , 2003 .

[11]  G. Hwang,et al.  Efficient Load Transfer to Polymer‐Grafted Multiwalled Carbon Nanotubes in Polymer Composites , 2004 .

[12]  C. Collier,et al.  Nanoelectrode scanning probes from fluorocarbon-coated single-walled carbon nanotubes , 2004 .

[13]  W. D. de Heer,et al.  Carbon Nanotubes--the Route Toward Applications , 2002, Science.

[14]  Werner J. Blau,et al.  Reinforcement of polymers with carbon nanotubes: The role of nanotube surface area , 2004 .

[15]  Lawrence F. Allard,et al.  Functionalization of Carbon Nanotubes with Polystyrene , 2002 .

[16]  V. Basiuk,et al.  Interaction of Oxidized Single-Walled Carbon Nanotubes with Vaporous Aliphatic Amines , 2002 .

[17]  Bin Zhao,et al.  Continuous spinning of a single-walled carbon nanotube-nylon composite fiber. , 2005, Journal of the American Chemical Society.

[18]  G. Xu,et al.  Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites , 2001 .

[19]  Enrique V. Barrera,et al.  Processing and Mechanical Properties of Fluorinated Single-Wall Carbon Nanotube−Polyethylene Composites , 2006 .

[20]  A. Gu,et al.  Thermal degradation behaviour and kinetic analysis of epoxy/montmorillonite nanocomposites , 2003 .

[21]  Gilbert C Walker,et al.  Noncovalent engineering of carbon nanotube surfaces by rigid, functional conjugated polymers. , 2002, Journal of the American Chemical Society.

[22]  Ya‐Ping Sun,et al.  Polymeric Carbon Nanocomposites from Carbon Nanotubes Functionalized with Matrix Polymer , 2003 .

[23]  Tianxi Liu,et al.  Morphology and Mechanical Properties of Multiwalled Carbon Nanotubes Reinforced Nylon-6 Composites , 2004 .

[24]  Haiqing Peng,et al.  Sidewall carboxylic acid functionalization of single-walled carbon nanotubes. , 2003, Journal of the American Chemical Society.

[25]  Quan-hong Yang,et al.  Multi-step purification of carbon nanotubes , 2002 .

[26]  D. E. Hill,et al.  Polyimide-functionalized carbon nanotubes: Synthesis and dispersion in nanocomposite films , 2004 .

[27]  Andrea E O'Rear,et al.  SWNT-Filled Thermoplastic and Elastomeric Composites Prepared by Miniemulsion Polymerization , 2002 .

[28]  P. Watts,et al.  Growing Multihydroxyl Hyperbranched Polymers on the Surfaces of Carbon Nanotubes by in Situ Ring-Opening Polymerization , 2004 .

[29]  X. B. Zhang,et al.  Catalyst traces and other impurities in chemically purified carbon nanotubes grown by CVD , 2002 .

[30]  Ya‐Ping Sun,et al.  Functionalizing multiple-walled carbon nanotubes with aminopolymers , 2002 .

[31]  J. Fierro,et al.  Sensitivity of single wall carbon nanotubes to oxidative processing: structural modification, intercalation and functionalisation , 2003 .

[32]  K. Watson,et al.  Dispersion of single wall carbon nanotubes by in situ polymerization under sonication , 2002 .

[33]  C. Lieber,et al.  Atomic structure and electronic properties of single-walled carbon nanotubes , 1998, Nature.

[34]  T. Mallouk,et al.  Individual single-walled nanotubes and hydrogels made by oxidative exfoliation of carbon nanotube ropes. , 2003, Journal of the American Chemical Society.

[35]  Frank T. Fisher,et al.  Amino-Functionalized Carbon Nanotubes for Binding to Polymers and Biological Systems , 2005, Chemistry of Materials.

[36]  S. Sushanth Kumar,et al.  Polyacrylonitrile Single‐Walled Carbon Nanotube Composite Fibers , 2004 .

[37]  V. C. Moore,et al.  Estimation of Magnetic Susceptibility Anisotropy of Carbon Nanotubes Using Magnetophotoluminescence , 2004 .

[38]  A. Rinzler,et al.  Electronic structure of atomically resolved carbon nanotubes , 1998, Nature.

[39]  Kyeongjae Cho,et al.  Thermal Expansion and Diffusion Coefficients of Carbon Nanotube-Polymer Composites , 2002, cond-mat/0203349.

[40]  T. Chou,et al.  Aligned multi-walled carbon nanotube-reinforced composites: processing and mechanical characterization , 2002 .