Impact of direct solar irradiance on heat transfer behind an open-jointed ventilated cladding: Experimental and numerical investigations

Abstract This paper is based on the study of an experimental wooden-framed house, equipped with a ventilated cladding, located in France. The focus is on investigating the heat transfer taking place in the ventilated air gap behind the cladding and on estimating their impact on heat transfer in the insulated part of the walls. Preliminary CFD simulation made it possible to describe the airflow in the ventilated air gap when buoyancy was acting as the main driving force. It was found that the airflow velocity could reach 0.8 m s−1, when exposed to 570 W m−2 solar irradiance. This was verified experimentally. A correlation to assess airflow rate in the air gap behind the cladding has been developed based on temperature differences and on experimental conclusions. The correlation is adapted to energy performance simulation and efficiently represents the average cavity airflow at different height for various irradiance and temperature conditions.

[1]  Lars-Erik Harderup,et al.  Comparison of measured and calculated temperature and relative humidity with varied and constant air flow in the facade air gap , 2011 .

[2]  Guohui Gan,et al.  Numerical determination of adequate air gaps for building-integrated photovoltaics , 2009 .

[3]  Muhsin Kilic,et al.  The usage of IR thermography for the temperature measurements inside an automobile cabin , 2009 .

[4]  Francesco Patania,et al.  Thermofluid-dynamic analysis of ventilated facades , 2010 .

[5]  Monika Woloszyn,et al.  Experimental wooden frame house for the validation of whole building heat and moisture transfer nume , 2011 .

[6]  Eduardo Blanco,et al.  Development and experimental validation of a simulation model for open joint ventilated façades , 2011 .

[7]  Deo Prasad,et al.  Thermographic analysis of a building integrated photovoltaic system , 2002 .

[8]  Tadiwos Zerihun Desta,et al.  Experimental data set for validation of heat, air and moisture transport models of building envelope , 2011 .

[9]  A. Piot.  Hygrothermique du bâtiment : expérimentation sur une maison à ossature bois en conditions climatiques naturelles et modélisation numérique , 2009 .

[10]  J.-M. Buchlin.  CONVECTIVE HEAT TRANSFER AND INFRARED THERMOGRAPHY (IRTH) , 2010 .

[11]  Monika Woloszyn,et al.  Numerical modelling of combined heat transfers in a double skin façade – Full-scale laboratory experiment validation , 2011 .

[12]  Christophe Menezo,et al.  Experimental natural convection on vertical surfaces for building integrated photovoltaic (BIPV) applications , 2008 .

[13]  Yves Candau,et al.  Improvement of building wall surface temperature measurements by infrared thermography , 2005 .

[14]  Bje Bert Blocken,et al.  On CFD simulation of wind-induced airflow in narrow ventilated facade cavities: coupled and decoupled simulations and modelling limitations , 2010 .

[15]  S. Fraser,et al.  Turbulent natural convection in a vertical parallel-plate channel with asymmetric heating , 2007 .