Residual Stresses and Deformations in Steel Structures

[1]  B. Andersson,et al.  Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformations , 1978 .

[2]  Arturo Cifuentes,et al.  A performance study of tetrahedral and hexahedral elements in 3-D finite element structural analysis , 1992 .

[3]  S. B. Brown,et al.  Finite Element Simulation of Welding of Large Structures , 1992 .

[4]  Leonard Mordfin.  ADVANCES TOWARD THE STANDARDIZATION OF RESIDUAL STRESS MEASUREMENTS , 1987 .

[5]  Gary S. Schajer,et al.  Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method. Part II—Practical Application of the Integral Method , 1988 .

[6]  John Goldak,et al.  Consistent strain fields in 3D finite element analysis of welds , 1990 .

[7]  G. W. Greenwood,et al.  The deformation of metals under small stresses during phase transformations , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[8]  John Goldak,et al.  Isoparametric quadrilaterals and hexahedrons for mesh-grading algorithms , 1987 .

[9]  A. M. Nawwar,et al.  A modified hole-drilling technique for determining residual stresses in thin plates , 1976 .

[10]  Seung Il Seo,et al.  A Study on the Prediction of Deformations of Welded Ship Structures , 1999 .

[11]  Peter Wriggers,et al.  Non-linear finite element analysis of solids and structures, volume 1: Essentials, M. A. Crisfield, John Wiley. ISBN: 0-471-92956-5 , 1994 .

[12]  M. T. Flaman,et al.  Brief investigation of induced drilling stresses in the center-hole method of residual-stress measurement , 1982 .

[13]  R. Cook,et al.  Concepts and Applications of Finite Element Analysis , 1974 .

[14]  S. C. Park,et al.  Weldin g Distortion of a Thin-Plate Panel Structure , 1999 .

[15]  Bulk-Zero Stress Standard—AISI 1018 Carbon-Steel Specimens , 1985 .

[16]  L. Lindgren,et al.  Deformation and stresses in butt-welding of large plates , 1985 .

[17]  J.M.J. McDill,et al.  Numerical analysis of transformation plasticity in 3D finite element analysis of welds , 1990 .

[18]  Gary S. Schajer,et al.  Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method. Part I—Stress Calculation Procedures , 1988 .

[19]  M. T. Flaman,et al.  Determination of residual-stress variation with depth by the hole-drilling method , 1985 .

[20]  Julian E. Bynum.  Modifications to the hole-drilling technique of measuring residual stresses for improved accuracy and reproducibility , 1981 .

[21]  Kjell Magne Mathisen,et al.  Error estimation and adaptivity in explicit nonlinear finite element simulation of quasi-static problems , 1999 .

[22]  J. Goldak,et al.  Coupling Heat Transfer, Microstructure Evolution and Thermal Stress Analysis in Weld Mechanics , 1992 .

[23]  J. Goldak,et al.  Thermal Stress Analysis of Welds : From Melting Point to Room Temperature , 1996 .

[24]  J. Goldak,et al.  Computer modeling of heat flow in welds , 1986 .

[25]  Yukio Ueda,et al.  New Measuring Method of Three-Dimensional Residual Stresses in Long Welded Joints Using Inherent Strains as Parameters—Lz Method , 1989 .

[26]  J.M.J. McDill,et al.  AN ADAPTIVE MESH-MANAGEMENT ALGORITHM FOR THREE-DIMENSIONAL AUTOMATIC FINITE ELEMENT ANALYSIS , 1991 .

[27]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[28]  W. F. Riley,et al.  Experimental stress analysis , 1978 .

[29]  B. L. Josefson,et al.  Three-Dimensional Finite Element Analysis of Temperatures and Stresses in a Single-Pass Butt-Welded Pipe , 1990 .

[30]  Jian Lu,et al.  Measurement of residual-stress distribution by the incremental hole-drilling method , 1985 .

[31]  Gary S. Schajer,et al.  Application of Finite Element Calculations to Residual Stress Measurements , 1981 .

[32]  Lars-Erik Lindgren,et al.  Deformations and stresses in welding of shell structures , 1988 .

[33]  D. Rosenthal,et al.  The Theory of Moving Sources of Heat and Its Application to Metal Treatments , 1946, Journal of Fluids Engineering.

[34]  J.M.J. McDill,et al.  Automatic remeshing for three-dimensional finite element simulation of welding , 1997 .

[35]  Henrik Runnemalm,et al.  Efficient finite element modelling and simulation of welding , 1999 .

[36]  G. S. Schajer,et al.  Stress Calculation Error Analysis for Incremental Hole-Drilling Residual Stress Measurements , 1996 .

[37]  J. Devaux,et al.  A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—I. Derivation of general relations , 1986 .

[38]  Barna A. Szabó,et al.  Estimation and Control Error Based on P-Convergence, , 1984 .

[39]  I. C. Sheng,et al.  Modeling Welding by Surface Heating , 1992 .

[40]  G. Schajer,et al.  Strain data averaging for the hole-drilling method , 1991 .

[41]  N. Rendler,et al.  Hole-drilling strain-gage method of measuring residual stresses , 1966 .

[42]  S. B. Brown,et al.  Rezoning and dynamic substructuring techniques in FEM simulations of welding processes , 1993 .

[43]  Jørgen Juncher Jensen,et al.  Simulation of Welding Distortions in Ship Section , 1999 .