A review of predictive control techniques for matrix converter applications
暂无分享,去创建一个
[1] Lee Empringham,et al. Control and Implementation of a Matrix-Converter-Based AC Ground Power-Supply Unit for Aircraft Servicing , 2010, IEEE Transactions on Industrial Electronics.
[2] Pericle Zanchetta,et al. Predictive control of a direct AC/AC matrix converter for power supply applications , 2012 .
[3] Pat Wheeler,et al. Predictive control of a direct resonant converter with output voltage compensation for high voltage DC power supply applications , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).
[4] J. Espinoza,et al. Reduction of common-mode voltage in an indirect matrix converter with imposed sinusoidal input/output waveforms , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[5] J.F. Silva,et al. Predictive optimal matrix converter control for a Dynamic Voltage Restorer with flywheel energy storage , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.
[6] Francisco Jurado,et al. Control of indirect matrix converter with bidirectional output stage for micro-turbine , 2012 .
[7] U. Ammann,et al. Predictive Approach to Increase Efficiency and Reduce Switching Losses on Matrix Converters , 2009, IEEE Transactions on Power Electronics.
[8] S. Joseph Jawhar,et al. Novel intelligent hybrid techniques for speed control of electric drives fed by matrix converter , 2012, 2012 International Conference on Computing, Electronics and Electrical Technologies (ICCEET).
[9] Johann W. Kolar,et al. Review of Three-Phase PWM AC–AC Converter Topologies , 2011, IEEE Transactions on Industrial Electronics.
[10] Marco Rivera,et al. Predictive Torque Control of a Multidrive System Fed by a Dual Indirect Matrix Converter , 2015, IEEE Transactions on Industrial Electronics.
[11] Marco Rivera,et al. Methods of source current reference generation for predictive control in a direct matrix converter , 2013 .
[12] J Monteiro,et al. Matrix Converter-Based Unified Power-Flow Controllers: Advanced Direct Power Control Method , 2011, IEEE Transactions on Power Delivery.
[13] Patrick Wheeler,et al. Comparison of predictive control strategies for direct resonant High Voltage DC power supply , 2012 .
[14] Marco Rivera,et al. A modulated model predictive control scheme for a two-level voltage source inverter , 2015, 2015 IEEE International Conference on Industrial Technology (ICIT).
[15] M. K. Hamzah,et al. Safe commutation for an AC-DC single phase matrix converter (SPMC) with combination of LC filter and damping resistor , 2012, 2012 IEEE International Conference on Power and Energy (PECon).
[16] José R. Rodríguez,et al. Predictive Current Control of an Induction Machine Fed by a Matrix Converter With Reactive Power Control , 2008, IEEE Transactions on Industrial Electronics.
[17] Johann W. Kolar,et al. Technological Issues and Industrial Application of Matrix Converters: A Review , 2013, IEEE Transactions on Industrial Electronics.
[18] José R. Espinoza,et al. A Comparative Assessment of Model Predictive Current Control and Space Vector Modulation in a Direct Matrix Converter , 2013, IEEE Transactions on Industrial Electronics.
[19] Antoni Arias,et al. Predictive Direct Torque Control of Matrix Converter fed Permanent Magnet Synchronous Machines , 2010, 2010 IEEE International Symposium on Industrial Electronics.
[20] Jon C. Clare,et al. Development of a Predictive Controller for Use on a Direct Converter for High-Energy Physics Applications , 2008, IEEE Transactions on Industrial Electronics.
[21] Debaprasad Kastha,et al. Improved Direct Torque and Reactive Power Control of a Matrix-Converter-Fed Grid-Connected Doubly Fed Induction Generator , 2015, IEEE Transactions on Industrial Electronics.
[22] Johann W. Kolar,et al. A Review of Control and Modulation Methods for Matrix Converters , 2012, IEEE Transactions on Industrial Electronics.
[23] Lee Empringham,et al. A review of Multi-level Matrix Converter topologies , 2008 .
[24] Mario Marchesoni,et al. Speed Finite Control Set Model Predictive Control of a PMSM Fed by Matrix Converter , 2015, IEEE Transactions on Industrial Electronics.
[25] José R. Rodríguez,et al. Matrix converters: a technology review , 2002, IEEE Trans. Ind. Electron..
[26] C. Klumpner,et al. Implementation of a hybrid AC/AC direct power converter with unity voltage transfer ratio , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..
[27] Ned Mohan,et al. Systematic Input Filter Design of Matrix Converter by Analytical Estimation of RMS Current Ripple , 2015, IEEE Transactions on Industrial Electronics.
[28] Lamouchi Zakaria,et al. Predictive Direct Torque and Flux Control of an induction motor drive fed by a Direct Matrix Converter with reactive power minimization , 2013, 2013 10th IEEE INTERNATIONAL CONFERENCE ON NETWORKING, SENSING AND CONTROL (ICNSC).
[29] G. Roy,et al. Cycloconverter operation under a new scalar control algorithm , 1989, 20th Annual IEEE Power Electronics Specialists Conference.
[30] Philippe Delarue,et al. A Simple Carrier-Based Modulation for the SVM of the Matrix Converter , 2013, IEEE Transactions on Industrial Informatics.
[31] P. Wheeler,et al. Implementation of a Hybrid AC–AC Direct Power Converter With Unity Voltage Transfer , 2008, IEEE Transactions on Power Electronics.
[32] Essam M. Rashad,et al. A simple CB-PWM technique for five-phase matrix converters including over-modulation mode , 2015, 2015 IEEE 8th GCC Conference & Exhibition.
[33] Saad Mekhilef,et al. A 12-Sector Space Vector Switching Scheme for Performance Improvement of Matrix-Converter-Based DTC of IM Drive , 2015, IEEE Transactions on Power Electronics.
[34] Bin Wu,et al. Predictive Current Control With Input Filter Resonance Mitigation for a Direct Matrix Converter , 2011, IEEE Transactions on Power Electronics.
[35] Marco Rivera,et al. Model-Based Predictive Rotor Current Control for Grid Synchronization of a DFIG Driven by an Indirect Matrix Converter , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.
[36] M. Rivera,et al. Comparison of Model Based Predictive Control and Fuzzy Logic Control of a DFIG with an Indirect Matrix Converter , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[37] P. Wheeler,et al. Predictive Control of a direct AC/AC matrix converter power supply under non-linear load conditions , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).
[38] Marco Rivera,et al. Predictive Control of an Induction Machine Fed by a Matrix Converter With Increased Efficiency and Reduced Common-Mode Voltage , 2014, IEEE Transactions on Energy Conversion.
[39] Toshihiko Noguchi,et al. Direct power control based indirect AC to AC power conversion system , 2009, 2009 13th European Conference on Power Electronics and Applications.
[40] Patrick Wheeler,et al. Predictive current control applied to a matrix converter: An assessment with the direct transfer function approach , 2010, 2010 IEEE International Conference on Industrial Technology.
[41] Pat Wheeler,et al. Multiobjective Modulated Model Predictive Control for a Multilevel Solid-State Transformer , 2015, IEEE Transactions on Industry Applications.
[42] Marco Rivera,et al. Review of predictive control methods to improve the input current of an indirect matrix converter , 2014 .
[43] M. Rivera,et al. Predictive torque and flux control of an induction machine fed by an indirect matrix converter , 2010, 2010 IEEE International Conference on Industrial Technology.
[44] Johann W. Kolar,et al. Predictive Control of an Indirect Matrix Converter , 2008, IEEE Transactions on Industrial Electronics.
[45] M. Rivera,et al. Predictive current control with reactive power minimization in an indirect matrix converter , 2010, 2010 IEEE International Conference on Industrial Technology.