Multi-objective path optimization for arc welding robot based on discrete DN multi-objective particle swarm optimization

Rational weld seams sequence is important for improving welding productivity and quality. Hence, intelligent path optimization strategy is introduced to obtain optimized weld seams sequence in this article. The path length and total welding deformation are considered for multi-objective path planning. First, the optimization problem description is presented. At the same time, the path length and the total welding deformation of some sequences are calculated. Then, improved multi-objective particle swarm optimization algorithm is studied. In addition, the agent model is obtained based on the sample data and experiment design. At last, the proposed algorithm is applied to optimize the welding path length and total welding deformation. The simulation results show the effectiveness of the optimization strategy.

[1]  Yonggang Chen,et al.  Dynamic multi-swarm differential learning particle swarm optimizer , 2017, Swarm Evol. Comput..

[2]  Witold Pedrycz,et al.  A comparative study of improved GA and PSO in solving multiple traveling salesmen problem , 2018, Appl. Soft Comput..

[3]  Jianxun Zhang,et al.  Single pass hybrid laser–MIG welding of 4-mm thick copper without preheating , 2015 .

[4]  Xingsheng Gu,et al.  Double global optimum genetic algorithm–particle swarm optimization-based welding robot path planning , 2016 .

[5]  Shengsun Hu,et al.  An approach to the path planning of tube-sphere intersection welds with the robot dedicated to J-groove joints , 2013 .

[6]  Nikos A. Aspragathos,et al.  Task scheduling and motion planning for an industrial manipulator , 2013 .

[7]  Jagdish C. Patra,et al.  A novel orthogonal PSO algorithm based on orthogonal diagonalization , 2017, Swarm Evol. Comput..

[8]  Bin He,et al.  Product environmental footprints assessment for product life cycle , 2019, Journal of Cleaner Production.

[9]  Soh-Khim Ong,et al.  Robot path planning optimization for welding complex joints , 2017 .

[10]  Riccardo Poli,et al.  Particle swarm optimization , 1995, Swarm Intelligence.

[11]  Hong Liu,et al.  A hybrid vertical mutation and self-adaptation based MOPSO , 2009, Comput. Math. Appl..

[12]  Peter I. Corke,et al.  MATLAB toolboxes: robotics and vision for students and teachers , 2007, IEEE Robotics & Automation Magazine.

[13]  Tao Xu,et al.  Multi-objective optimization of gas metal arc welding parameters and sequences for low-carbon steel (Q345D) T-joints , 2017 .

[14]  Kalyanmoy Deb,et al.  An Evolutionary Many-Objective Optimization Algorithm Using Reference-Point-Based Nondominated Sorting Approach, Part I: Solving Problems With Box Constraints , 2014, IEEE Transactions on Evolutionary Computation.

[15]  Prospero C. Naval,et al.  An effective use of crowding distance in multiobjective particle swarm optimization , 2005, GECCO '05.

[16]  Bo Liu,et al.  An Effective PSO-Based Memetic Algorithm for TSP , 2006 .

[17]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[18]  Zhang Cong-yu,et al.  Improved NSGA-II algorithm with circular crowded sorting , 2010 .

[19]  Wang Tao,et al.  Study on welding sequence of butt-welded structures based on equivalent heat source parameter , 2018, International Journal of Pressure Vessels and Piping.

[20]  Jing Wu,et al.  Intelligentized Methodology for Arc Welding Dynamical Processes , 2009, Lecture Notes in Electrical Engineering.

[21]  Bin He,et al.  Underactuated robotics: A review , 2019, International Journal of Advanced Robotic Systems.

[22]  Xingsheng Gu,et al.  Spot welding robot path planning using intelligent algorithm , 2019, Journal of Manufacturing Processes.

[23]  Qiang Zhang,et al.  Minimum time path planning of robotic manipulator in drilling/spot welding tasks , 2016, J. Comput. Des. Eng..

[24]  P. Viswanath,et al.  Rough-DBSCAN: A fast hybrid density based clustering method for large data sets , 2009, Pattern Recognit. Lett..