Wind energy evaluation for a highly complex terrain using Computational Fluid Dynamics (CFD)

Computational Fluid Dynamics (CFD) modeling is becoming an important tool in the wind industry to study wind flow patterns. Accurate CFD simulations of wind flow are essential for the selection of wind farm locations as well as the design of appropriate wind turbines. This article validates the average wind power estimated by the state of the art CFD tool WindSim using on-site measurements from nine meteorological stations scattered around a highly complex terrain at several heights. It is known that the numerical solver is very sensitive to the wide number of computational parameters that have to be taken into consideration by the user. This paper investigates those computational parameters in details including a grid dependency test, the order of the discretization schemes, the turbulence models (Standard k-e, k-e with Yap corrections, RNG k-e and Modified k-e) and the iterative convergence criteria. The best model is employed to investigate major hot spots identified where wind farming is feasible in Mauritius with due consideration to land use and topographical requirements. Wind maps are produced at four levels which are of typical hub heights of commercial wind turbines. These maps can be used to assist in the decision-making process when locating best placements for wind farming.

[1]  Luís Frölén Ribeiro,et al.  Linear and nonlinear models in wind resource assessment and wind turbine micro-siting in complex terrain , 2008 .

[2]  S. Orszag,et al.  Development of turbulence models for shear flows by a double expansion technique , 1992 .

[3]  Kincho H. Law,et al.  Layout optimization for maximizing wind farm power production using sequential convex programming , 2015 .

[4]  Gunner Chr. Larsen,et al.  Comparison of Wake Models with Data for Offshore Windfarms , 2001 .

[5]  Julio Hernández,et al.  Survey of modelling methods for wind turbine wakes and wind farms , 1999 .

[6]  Serwan Mj Baban,et al.  Developing and applying a GIS-assisted approach to locating wind farms in the UK , 2001 .

[7]  Martin Otto Laver Hansen,et al.  Aerodynamics of Wind Turbines , 2001 .

[8]  Otto Weiler,et al.  CFD simulation of wind flow over natural complex terrain : case study with validation by field measurements for Ria de Ferrol, Galicia, Spain , 2015 .

[9]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .

[10]  Vijay K. Garg.  Applied Computational Fluid Dynamics , 1998 .

[11]  Alberto Martilli,et al.  CFD simulation of airflow over a regular array of cubes. Part I: Three-dimensional simulation of the flow and validation with wind-tunnel measurements , 2007 .

[12]  C. Yap.  Turbulent heat and momentum transfer in recirculating and impinging flows , 1987 .

[13]  M. R. Lollchund,et al.  Numerical analysis of wind flow patterns over complex hilly terrains: comparison between two commonly used CFD software , 2016 .

[14]  P. Richards,et al.  Appropriate boundary conditions for computational wind engineering models using the k-ε turbulence model , 1993 .

[15]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[16]  P. Bradshaw,et al.  Momentum transfer in boundary layers , 1977 .

[17]  P. Wesseling.  Principles of Computational Fluid Dynamics , 2000 .

[18]  F. Pinho,et al.  Near wall characterization of the flow over a two-dimensional steep smooth hill , 2007 .

[19]  P. Roache.  Verification of Codes and Calculations , 1998 .

[20]  E. S. Politis,et al.  Modelling and Measuring Flow and Wind Turbine Wakes in Large Wind Farms Offshore , 2009, Renewable Energy.

[21]  Rafik Belarbi,et al.  A CFD MODEL FOR SIMULATING URBAN FLOW IN COMPLEX MORPHOLOGICAL STREET NETWORK , 2012 .

[22]  Alexander Kalmikov,et al.  Wind power resource assessment in complex urban environments: MIT campus case-study using CFD Analysis , 2010 .

[23]  Unfccc.  Kyoto Protocol to the United Nations Framework Convention on Climate Change , 1997 .