Properties after weathering and decay resistance of a thermally modified wood structural board

[1]  A. Rapp,et al.  Durability of thermally modified timber from industrial-scale processes in different use classes: Results from laboratory and field tests , 2007 .

[2]  Roger S. U. Smith,et al.  Effect of Gamma Radiation, Wet-Heat, and Ethylene Oxide Sterilization of Wood on its Subsequent Decay by Four Wood-Destroying Fungi , 2007 .

[3]  M. Souza,et al.  Biodegradação de chapas de partículas orientadas de pinus, eucalipto e cipreste expostas a quatro fungos apodrecedores , 2007 .

[4]  Hui Wan,et al.  Utilizing eastern white cedar to improve the resistance of strand boards to mold and decay fungi , 2007 .

[5]  E. Okino,et al.  POST-THERMAL TREATMENT OF ORIENTED STRANDBOARD (OSB) MADE FROM CYPRESS (CUPRESSUS GLAUCA LAM.) , 2007 .

[6]  W. Paul,et al.  Thermal modification of OSB-strands by a one-step heat pre-treatment – Influence of temperature on weight loss, hygroscopicity and improved fungal resistance , 2007, Holz als Roh- und Werkstoff.

[7]  Gökay Nemli,et al.  Evaluation of the mechanical, physical properties and decay resistance of particleboard made from particles impregnated with Pinus brutia bark extractives. , 2006, Bioresource technology.

[8]  Antonios N. Papadopoulos,et al.  Decay resistance in ground stake test of acetylated OSB , 2006, Holz als Roh- und Werkstoff.

[9]  A. Rapp,et al.  Field test of resistance of modified wood to marine borers , 2006 .

[10]  M. Hakkou,et al.  Investigations of the reasons for fungal durability of heat-treated beech wood , 2006 .

[11]  Dian-Qing Yang,et al.  Increasing mold resistance of strand boards with spruce heartwood , 2006 .

[12]  C. Hill,et al.  Wood Modification: Chemical, Thermal and Other Processes , 2006 .

[13]  S. Y. Zhang,et al.  Mold resistance of medium density fiberboard panels made from black spruce, hybrid poplar, larch and a mixture of S-P-F chips , 2006, Holz als Roh- und Werkstoff.

[14]  C. D. Del Menezzi,et al.  Contact thermal post-treatment of oriented strandboard to improve dimensional stability: A preliminary study , 2006, Holz als Roh- und Werkstoff.

[15]  G. Nemli,et al.  Effects of melamine raw paper weight, varnish type and the structure of continuous pressed laminate (CPL) on the physical, mechanical properties and decay resistance of particleboard , 2005 .

[16]  Roger M. Rowell,et al.  Handbook of wood chemistry and wood composites. , 2005 .

[17]  J. A. Shields,et al.  Chemical and physical changes required for producing dimensionally stable wood-based composites , 1988, Wood Science and Technology.

[18]  E. Okino,et al.  Evaluation of the physical and biological properties of particleboard and flakeboard made from Cupressus spp , 2004 .

[19]  L. Levin,et al.  Degradation of organic pollutants by the white rot basidiomycete Trametes trogii , 2003 .

[20]  J. Weiland,et al.  Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy , 2003, Holz als Roh- und Werkstoff.

[21]  S. Kartal,et al.  Decay and termite resistance of medium density fiberboard (MDF) made from different wood species , 2003 .

[22]  Carol A. Clausen,et al.  Relationships between mechanical properties, weight loss and chemical composition of wood during incipient brown rot decay. , 2002 .

[23]  A. Pizzi,et al.  Durability of heat-treated wood , 2002, Holz als Roh- und Werkstoff.

[24]  Mark Knaebe,et al.  Erosion Rates of Wood During Natural Weathering. Part III. Effect of Exposure Angle on Erosion Rate , 2001 .

[25]  E. Biblis.  Effect of weathering on surface quality and structural properties of six species of untreated commercial plywood siding after 6 years of exposure in Alabama. , 2000 .

[26]  A. Pizzi,et al.  Field weathering of plywood panels bonded with UF adhesives and low proportions of melamine salts , 1999, Holz als Roh- und Werkstoff.

[27]  A. Pitman,et al.  Biological resistance of chemically modified aspen composites , 1999 .

[28]  T. Yoshimura,et al.  Effects of Heat Treatments of Wood on the Feeding Behaviour of Two Subterranean Termites , 1999 .

[29]  Gyu-Hyeok Kim,et al.  Effect of heat treatment on the decay resistance and the bending properties of radiata pine sapwood , 1998 .

[30]  G. Nemli,et al.  Biological, physical and mechanical properties of particleboard manufactured from waste tea leaves , 1998 .

[31]  J. Alexopoulos.  Accelerated aging and outdoor weathering of aspen waferboard , 1992 .

[32]  C. Carll,et al.  Weathering and decay of finished aspen waferboard , 1987 .

[33]  R. Rowell,et al.  Dimensional Stabilization of Wood in Use. , 1981 .

[34]  H. Eggins,et al.  Biodeterioration and biodegradation , 1980 .