Roof Deformation Characteristics and Preventive Techniques Using a Novel Non-Pillar Mining Method of Gob-Side Entry Retaining by Roof Cutting

A new non-pillar mining technology, gob-side entry retaining by roof cutting (GERRC), different from the conventional gob-side entry retaining formed by a roadside filling support, is introduced in this study. In the new technology, roof cutting is conducted so that the roof plate forms a short cantilever beam structure within a certain range above the retained entry, thus changing the stress boundary condition of the roof structure. To explore the deformation characteristics of the roof under this special condition, a short cantilever beam mechanical model was established and solved using energy theory and displacement variational methods. Meanwhile, a theoretical and analytical control solution for roof deformation was obtained and verified via field-measured results. Based on the aforementioned calculation, the relationship between the roof deformation and main influence parameters was explored. It was concluded that the rotation of the upper main roof and width of the retained entry had the most significant impacts on roof deformation. Bolt and cable support and temporary support in the entry had a non-obvious influence on the roof deformation and could not prevent the given deformation that was caused by the rotation of the upper main roof. Based on comprehensive theoretical analysis and calculation results, ideas and countermeasures to control short cantilever roof deformation—that is, designing a reasonable height of roof cutting and a controlled width of retaining entry—were proposed and tested. Field monitoring shows that the entry control effects were satisfactory.

[1]  Jun Wang,et al.  Soft–strong supporting mechanism of gob-side entry retaining in deep coal seams threatened by rockburst , 2014 .

[2]  Shuai Wang,et al.  Adaptation assessment of gob-side entry retaining based on geological factors , 2016 .

[3]  Jun Yang,et al.  An Innovative Approach for Gob-Side Entry Retaining in Thick Coal Seam Longwall Mining , 2017 .

[4]  Xuehua Li,et al.  Numerical Investigation of the Effect of the Location of Critical Rock Block Fracture on Crack Evolution in a Gob-side Filling Wall , 2016, Rock Mechanics and Rock Engineering.

[5]  Xingyu Zhang,et al.  Analysis and Optimization of Entry Stability in Underground Longwall Mining , 2017 .

[6]  Jianxin Tang,et al.  Spontaneous caving and gob-side entry retaining of thin seam with large inclined angle , 2014 .

[7]  Nong Zhang,et al.  Stability and deformation of surrounding rock in pillarless gob-side entry retaining , 2012 .

[8]  Yunliang Tan,et al.  Design and construction of entry retaining wall along a gob side under hard roof stratum , 2015 .

[9]  Nong Zhang,et al.  Position-optimization on retained entry and backfilling wall in gob-side entry retaining techniques , 2015 .

[10]  Ki-Il Song,et al.  Stabilization of Gob-Side Entry with an Artificial Side for Sustaining Mining Work , 2016 .

[11]  Manchao He,et al.  Principles of the roof cut short-arm beam mining method (110 method) and its mining-induced stress distribution , 2017 .

[12]  Nong Zhang,et al.  Pressure relief and structure stability mechanism of hard roof for gob-side entry retaining , 2015 .

[13]  Zhibiao Guo,et al.  Longwall mining “cutting cantilever beam theory” and 110 mining method in China—The third mining science innovation , 2015 .

[14]  Peng Gong,et al.  Coupling mechanism of roof and supporting wall in gob-side entry retaining in fully-mechanized mining with gangue backfilling , 2011 .

[15]  Wei Li,et al.  Strata Behaviors and Rock Burst–Inducing Mechanism under the Coupling Effect of a Hard, Thick Stratum and a Normal Fault , 2018 .

[16]  Zhanguo Ma,et al.  Optimization study on roof break direction of gob-side entry retaining by roof break and filling in thick-layer soft rock layer , 2017 .

[17]  Yuehua Deng,et al.  Feasibility analysis of gob-side entry retaining on a working face in a steep coal seam , 2014 .