An algorithm for fast calculation of short circuit forces in high current busbars of electric arc furnace transformers based on method of images

Abstract This paper proposes an algorithm for the calculation of short circuit forces on the high current busbars of electric arc furnace (EAF) transformers based on the method of images using an analytical solution for the electromagnetic force between two adjacent current carrying rectangular conductor. The theory of images is used to account for the impact of the tank walls on the short circuit forces on the busbars. The proposed method uses an iterative algorithm and increases the number of image layers to achieve the desired accuracy. A 30 MVA EAF transformer is investigated as a case study and the results are compared to 2D finite element analysis (FEA). ANSYS software is used for the FEA. The proposed algorithm converges very fast, so that only in its first iteration, the convergence error is less than 0.2%. The comparisons show that the short circuit force calculations using the proposed method, conform to the 2D FEA results. However, the short-circuit calculation time using the proposed method is about 20 times faster than the 2D FEA with the same relative error. Therefore it can be used as a faster alternative for the FEA. The proposed method is characterized by fast convergence, simple calculations and high precision.

[1]  S. A. Khaparde,et al.  Stray loss evaluation in power transformers-a review , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[2]  M. P. Papadopoulos,et al.  Leakage flux and force calculation on power transformer windings under short-circuit: 2D and 3D models based on the theory of images and the finite element method compared to measurements , 1994 .

[3]  S. A. Khaparde,et al.  Transformer Engineering: Design and Practice , 2004 .

[4]  S.V. Kulkarni,et al.  Analysis of Short Circuit Performance of Split-Winding Transformer Using Coupled Field-Circuit Approach , 2007, 2007 IEEE Power Engineering Society General Meeting.

[5]  Bertrand Poulin,et al.  Transformer Design Principles: With Applications to Core-Form Power Transformers, Second Edition , 2010 .

[6]  P. Gomez,et al.  Accurate and Efficient Computation of the Inductance Matrix of Transformer Windings for the Simulation of Very Fast Transients , 2011, IEEE Transactions on Power Delivery.

[7]  H. Mohseni,et al.  Balancing Current Distribution in Parallel Windings of Furnace Transformers Using the Genetic Algorithm , 2010, IEEE Transactions on Magnetics.

[8]  M. R. Krakowski,et al.  Effect of current distribution in parallel bars on electromagnetic field at nearby steel wall , 1989 .

[9]  H.A. Toliyat,et al.  Winding Arrangement Effects on Electromagnetic Forces and Short-Circuit Reactance Calculation in Power Transformers via Numerical and Analytical Methods , 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

[10]  D. Zarko,et al.  Analysis of short-circuit forces at the top of the low voltage U-type and I-type winding in a power transformer , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[11]  D. Cheng.  Field and wave electromagnetics , 1983 .

[12]  Sung-Chin Hahn,et al.  Experimental Verification and Finite Element Analysis of Short-Circuit Electromagnetic Force for Dry-Type Transformer , 2012, IEEE Transactions on Magnetics.

[13]  Jean Mahseredjian,et al.  Analytical calculation of leakage inductance for low-frequency transformer modeling , 2013, 2013 IEEE Power & Energy Society General Meeting.

[14]  Jawad Faiz,et al.  Analytical estimation of short circuit axial and radial forces on power transformers windings , 2014 .

[15]  Xiaofeng Zhang,et al.  Analysis and calculation of short-circuit electro-dynamic forces on rectangular bus bars , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[16]  Damijan Miljavec,et al.  Current distribution in the low-voltage winding of the furnace transformer , 2012 .

[17]  J. A. Buck,et al.  Engineering Electromagnetics , 1967 .

[18]  László Kiss,et al.  Large Power Transformers , 1987 .

[19]  P. S. Dokopoulos,et al.  Parametric Short-Circuit Force Analysis of Three-Phase Busbars: A Fully Automated Finite Element Approach , 2002, IEEE Power Engineering Review.

[20]  E. J. Tuohy,et al.  Computation of Eddy Currents, Shielding and Transient Forces in Power System Equipment by the Method of Images , 1971 .

[21]  M. Steurer,et al.  The Impact of Inrush Currents on the Mechanical Stress of High-Voltage Power Transformer Coils , 2001, IEEE Power Engineering Review.

[22]  Sang-Yong Jung,et al.  Finite-Element Analysis of Short-Circuit Electromagnetic Force in Power Transformer , 2011, IEEE Transactions on Industry Applications.

[23]  Rafael Escarela-Perez,et al.  2D finite-element determination of tank wall losses in pad-mounted transformers , 2004 .