곡선형 세미실드터널링의 3 차원 무인원격측량에 관한 연구

Semi-shield tunneling is one of the propulsion construction methods used to lay pipes underground between two pits named ‘entrance’ and ‘destination’, respectively. Usually a simple composition, such as ‘a fiducial target at the entrance＋a total station (TS)＋a target on the machine’, is used to confirm the planned course. However, unavoidable curved sections are present in small-sized pipe lines, which are laid after implementation of a road system, for public works such as waterworks, sewer, electrical power, and gas and communication networks. Therefore, if the planned course has a curved section, it is difficult to survey the course with the abovementioned simple composition. This difficulty could be solved by using the multiple total stations (MTS), which attaches the cross type linear LED target to oneself. The MTS are disposed to where each TS can detect the LED target at the other TS or the base point or the machine. And the accurate relative positions between each MTS and target are calculated from measured data. This research proposes the relative and absolute coordinate calculation algorithm by using three MTS to measure a curved course with 20m curvature at 30m maximum distance, and verifies the algorithm experimentally.