Design of a Control Chart Based on COM-Poisson Distribution for the Uncertainty Environment

This paper will introduce the neutrosophic COM-Poisson (NCOM-Poisson) distribution. Then, the design of the attribute control chart using the NCOM-Poisson distribution is given. The structure of the control chart under the neutrosophic statistical interval method will be given. The algorithm to determine the average run length under neutrosophic statistical interval system will be given. The performance of the proposed control chart is compared with the chart based on classical statistics in terms of neutrosophic average run length (NARL). A simulation study and a real example are also added. From the comparison of the proposed control chart with the existing chart, it is concluded that the proposed control chart is more efficient in detecting a shift in the process. Therefore, the proposed control chart will be helpful in minimizing the defective product. In addition, the proposed control chart is more adequate and effective to apply in uncertainty environment.

[1]  Muhammad Aslam,et al.  A New Sampling Plan Using Neutrosophic Process Loss Consideration , 2018, Symmetry.

[2]  Muhammad Aslam,et al.  Design of a Control Chart for Gamma Distributed Variables Under the Indeterminate Environment , 2019, IEEE Access.

[3]  Marta Pérez-Casany,et al.  Overdispersed and underdispersed Poisson generalizations , 2005 .

[4]  Muhammad Azam,et al.  A Control Chart for COM–Poisson Distribution Using Resampling and Exponentially Weighted Moving Average , 2016, Qual. Reliab. Eng. Int..

[5]  Muhammad Aslam,et al.  Testing of Grouped Product for the Weibull Distribution Using Neutrosophic Statistics , 2018, Symmetry.

[6]  Muhammad Aslam,et al.  Monitoring the Variability in the Process Using Neutrosophic Statistical Interval Method , 2018, Symmetry.

[7]  Hamid Reza Karimi,et al.  An Improved Result on Exponential Stabilization of Sampled-Data Fuzzy Systems , 2018, IEEE Transactions on Fuzzy Systems.

[8]  Hui Wang,et al.  Attribute Control Chart Construction Based on Fuzzy Score Number , 2016, Symmetry.

[9]  Hui Zhang,et al.  Active Steering Actuator Fault Detection for an Automatically-Steered Electric Ground Vehicle , 2017, IEEE Transactions on Vehicular Technology.

[10]  A. W. Kemp,et al.  Generalized Poisson Distributions: Properties and Applications. , 1992 .

[11]  Miin-Shen Yang,et al.  Change-point detection for shifts in control charts using fuzzy shift change-point algorithms , 2016, Comput. Ind. Eng..

[12]  T. Minka,et al.  A useful distribution for fitting discrete data: revival of the Conway–Maxwell–Poisson distribution , 2005 .

[13]  Hsien-Chung Wu,et al.  Fuzzy X and R control charts: Fuzzy dominance approach , 2011, Comput. Ind. Eng..

[14]  Aamir Saghir,et al.  Cumulative sum charts for monitoring the COM-Poisson processes , 2014, Comput. Ind. Eng..

[15]  Aamir Saghir,et al.  Control chart for monitoring multivariate COM-Poisson attributes , 2014 .

[16]  Mohammad Hadi Madadi,et al.  A fuzzy development for attribute control chart with Monte Carlo simulation method , 2017 .

[17]  Galit Shmueli,et al.  The COM-Poisson model for count data: a survey of methods and applications , 2012 .

[18]  Muhammad Aslam,et al.  Control Chart for Failure-Censored Reliability Tests under Uncertainty Environment , 2018, Symmetry.

[19]  Nihal Erginel,et al.  Development of fuzzy X-R and X-S control charts using alpha-cuts , 2009, Inf. Sci..

[20]  Muhammad Aslam,et al.  Design of a New Attribute Control Chart Under Neutrosophic Statistics , 2018, International Journal of Fuzzy Systems.

[21]  Jun Ye,et al.  Expressions of Rock Joint Roughness Coefficient Using Neutrosophic Interval Statistical Numbers , 2017, Symmetry.

[22]  Jun Ye,et al.  Scale Effect and Anisotropy Analyzed for Neutrosophic Numbers of Rock Joint Roughness Coefficient Based on Neutrosophic Statistics , 2017, Symmetry.

[23]  Aamir Saghir,et al.  A Flexible and Generalized Exponentially Weighted Moving Average Control Chart for Count Data , 2014, Qual. Reliab. Eng. Int..

[24]  Florentin Smarandache,et al.  Introduction to Neutrosophic Statistics , 2014, ArXiv.

[25]  Nihal Erginel,et al.  Fuzzy rule-based and control charts , 2014, J. Intell. Fuzzy Syst..

[26]  Hamid Reza Karimi,et al.  Fuzzy-Model-Based Sliding Mode Control of Nonlinear Descriptor Systems , 2019, IEEE Transactions on Cybernetics.

[27]  Muhammad Azam,et al.  Two-Stage Group Acceptance Sampling Plan for Burr Type X Percentiles , 2013 .

[28]  Aamir Saghir,et al.  Control Charts for Dispersed Count Data: An Overview , 2015, Qual. Reliab. Eng. Int..

[29]  Kimberly F. Sellers.  A generalized statistical control chart for over‐ or under‐dispersed data , 2012, Qual. Reliab. Eng. Int..

[30]  Florentin Smarandache.  Neutrosophic Logic - A Generalization of the Intuitionistic Fuzzy Logic , 2003, EUSFLAT Conf..

[31]  Aamir Saghir,et al.  A control chart for COM-Poisson distribution using a modified EWMA statistic , 2017 .

[32]  Hamid Reza Karimi,et al.  Sliding Mode Control of Fuzzy Singularly Perturbed Systems With Application to Electric Circuit , 2018, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[33]  Nihal Erginel.  Fuzzy rule-based $\tilde p$ and $n\tilde p$ control charts , 2014 .

[34]  Ahmet Çelik,et al.  A fuzzy approach to define sample size for attributes control chart in multistage processes: An application in engine valve manufacturing process , 2008, Appl. Soft Comput..

[35]  I. B. Turksen,et al.  FUZZY CONTROL CHARTS FOR VARIABLE AND ATTRIBUTE QUALITY CHARACTERISTICS , 2006 .

[36]  Muhammad Aslam,et al.  A Control Chart for COM–Poisson Distribution Using Multiple Dependent State Sampling , 2016, Qual. Reliab. Eng. Int..

[37]  Aamir Saghir,et al.  The Use of Probability Limits of COM–Poisson Charts and their Applications , 2013, Qual. Reliab. Eng. Int..