Circuit design techniques for very low-voltage analog functional blocks using triple-tail cells

Novel circuit design techniques for very low-voltage analog functional blocks using triple-tail cells are presented. A triple-tail cell is operable on very low voltage because it possesses a very simple circuit structure, and it operates as a gain controllable differential amplifier and a tunable rectifier. It is very suitable for analog functional blocks, such as operational transconductance amplifiers (OTA's), four-quadrant analog multipliers, logarithmic intermediate-frequency (IF) amplifiers, and automatic gain control (AGC) amplifiers, to be realized using triple-tail cells with a small circuit scale. Therefore, a triple-tail cell is the most essential circuit for very low-voltage operation in signal processing. Furthermore, very low-voltage operation at a 1 V supply voltage and the fundamental characteristics of the basic circuits consisting of triple-tail cells, such a transconductance controllable OTA, four-quadrant analog multipliers, a logarithmic IF amplifier, and an AGC amplifier, were verified with transistor-arrays and discrete components on a breadboard.

[1]  Katsuji Kimura.  A Unified Analysis of Four-Quadrant Analog Multipliers Consisting of Emitter and Source-Coupled Transistors Operable on Low Supply Voltage (Special Section on Low-Power and Low-Voltage Integrated Circuits) , 1993 .

[2]  Barrie Gilbert,et al.  A new wide-band amplifier technique , 1968 .

[3]  K. Kimura,et al.  Frequency mixer with a frequency doubler for integrated circuits , 1994 .

[4]  Hiroshi Tanimoto,et al.  Realization of a 1-V active filter using a linearization technique employing plurality of emitter-coupled pairs , 1991 .

[5]  K. Kimura.  A bipolar four-quadrant analog quarter-square multiplier consisting of unbalanced emitter-coupled pairs and expansions of its input ranges , 1994 .

[6]  Z. Wang,et al.  A CMOS four-quadrant analog multiplier with single-ended voltage output and improved temperature performance , 1991 .

[7]  J.C. Schmoock.  An input stage transconductance reduction technique for high-slew rate operational amplifiers , 1975, IEEE Journal of Solid-State Circuits.

[8]  K. Kimura,et al.  Some circuit design techniques for low-voltage analog functional elements using squaring circuits , 1996 .

[9]  K. Kimura.  Some circuit design techniques for bipolar and MOS pseudologarithmic rectifiers operable on low supply voltage , 1992 .

[10]  K. Kimura,et al.  An MOS four-quadrant analog multiplier based on the multitail technique using a quadritail cell as a multiplier core , 1995 .

[11]  H. W. H. Calder.  Audio frequency gyrator filters for an integrated radio paging receiver , 1984 .

[12]  K. Martin,et al.  A CMOS analog multi-sinusoidal phase-locked-loop , 1994 .

[13]  Katsuji Kimura.  A Bipolar Very Low-Voltage Multiplier Core Using a Quadritail Cell , 1995 .

[14]  A. Bilotti.  Applications of a monolithic analog multiplier , 1968 .

[15]  David Bingham,et al.  Novel Multi-Purpose LIC's Introduce New Concepts into Circuit Design , 1967 .

[16]  J. E. Solomon,et al.  A high-performance monolithic IF amplifier incorporating electronic gain control , 1968 .

[17]  Robert G. Meyer,et al.  Analysis and Design of Analog Integrated Circuits , 1993 .