Mechanistic insights into formation of SnO₂ nanotubes: asynchronous decomposition of poly(vinylpyrrolidone) in electrospun fibers during calcining process.

The formation mechanism of SnO2 nanotubes (NTs) fabricated by generic electrospinning and calcining was revealed by systematically investigating the structural evolution of calcined fibers, product composition, and released volatile byproducts. The structural evolution of the fibers proceeded sequentially from dense fiber to wire-in-tube to nanotube. This remarkable structural evolution indicated a disparate thermal decomposition of poly(vinylpyrrolidone) (PVP) in the interior and the surface of the fibers. PVP on the surface of the outer fibers decomposed completely at a lower temperature (<340 °C), due to exposure to oxygen, and SnO2 crystallized and formed a shell on the fiber. Interior PVP of the fiber was prone to loss of side substituents due to the oxygen-deficient decomposition, leaving only the carbon main chain. The rest of the Sn crystallized when the pores formed resulting from the aggregation of SnO2 nanocrystals in the shell. The residual carbon chain did not decompose completely at temperatures less than 550 °C. We proposed a PVP-assisted Ostwald ripening mechanism for the formation of SnO2 NTs. This work directs the fabrication of diverse nanostructure metal oxide by generic electrospinning method.

[1]  Zheng Xu,et al.  Controllable Synthesis of Porous α-Fe2O3 Microtube and Tube-in-tube by Non-coaxial Electrospinning , 2013 .

[2]  Yadong Yin,et al.  Hollow Nanocrystals through the Nanoscale Kirkendall Effect , 2013 .

[3]  Darrin S. Muggli,et al.  SYNTHESIS FACTORS THAT IMPACT TiO2 NANOTUBE ACTIVITY DURING GAS-PHASE PHOTOCATALYTIC OXIDATION OF METHANOL , 2013 .

[4]  V. Grassian,et al.  Nitrate photochemistry in NaY zeolite: product formation and product stability under different environmental conditions. , 2013, The journal of physical chemistry. A.

[5]  Byeongdu Lee,et al.  How "hollow" are hollow nanoparticles? , 2013, Journal of the American Chemical Society.

[6]  D. Kuang,et al.  Fabrication of partially crystalline TiO2 nanotube arrays using 1, 2-propanediol electrolytes and application in dye-sensitized solar cells , 2013 .

[7]  D. Yan,et al.  Preparation of PVDF porous membranes by using PVDF-g-PVP powder as an additive and their antifouling property , 2012 .

[8]  Zheng Xu,et al.  Controllable fabrication of TiO(2) 1D-nano/micro structures: solid, hollow, and tube-in-tube fibers by electrospinning and the photocatalytic performance. , 2012, Chemistry.

[9]  A. Rothschild,et al.  Microstructure evolution of TiO2 gas sensors produced by electrospinning , 2012 .

[10]  Q. Wei,et al.  Formation mechanism of porous hollow SnO2 nanofibers prepared by one-step electrospinning , 2012 .

[11]  E. Xie,et al.  Preparation of highly porous TiO2 nanotubes and their catalytic applications , 2012 .

[12]  M. Ritala,et al.  Thermal study on electrospun polyvinylpyrrolidone/ammonium metatungstate nanofibers: optimising the annealing conditions for obtaining WO3 nanofibers , 2011 .

[13]  N. Ravishankar,et al.  Thermal stability of spherical nanoporous aggregates and formation of hollow structures by sintering--a phase-field study. , 2011, ACS nano.

[14]  S. Trasatti,et al.  Polypyrrole films on Al alloys: The role of structural changes on protection performance , 2011 .

[15]  Weidong Shi,et al.  Oriented contraction: a facile nonequilibrium heat-treatment approach for fabrication of maghemite fiber-in-tube and tube-in-tube nanostructures. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[16]  Yunfeng Shi,et al.  Surface diffusion driven nanoshell formation by controlled sintering of mesoporous nanoparticle aggregates. , 2010, Nanoscale.

[17]  Seong‐Hyeon Hong,et al.  SnO2 nanotubes fabricated using electrospinning and atomic layer deposition and their gas sensing performance , 2010, Nanotechnology.

[18]  Yu Wang,et al.  Electrospinning preparation and room temperature gas sensing properties of porous In2O3 nanotubes and nanowires , 2010 .

[19]  Hongwei Song,et al.  Porous In2O3:RE (RE = Gd, Tb, Dy, Ho, Er, Tm, Yb) Nanotubes: Electrospinning Preparation and Room Gas-Sensing Properties , 2010 .

[20]  G. Somorjai,et al.  Spectroscopic Study of the Thermal Degradation of PVP-capped Rh and Pt Nanoparticles in H2 and O2 Environments , 2010 .

[21]  Seong-Geun Oh,et al.  Hollow ZnO nanofibers fabricated using electrospun polymer templates and their electronic transport properties. , 2009, ACS nano.

[22]  L. Wan,et al.  Room Temperature Ionic Liquids Assisted Green Synthesis of Nanocrystalline Porous SnO2 and Their Gas Sensor Behaviors , 2008 .

[23]  J. Wendorff,et al.  Functional Self-Assembled Nanofibers by Electrospinning , 2008 .

[24]  Margit Zacharias,et al.  Formation of nanotubes and hollow nanoparticles based on Kirkendall and diffusion processes: a review. , 2007, Small.

[25]  Andreas Greiner,et al.  Electrospinning: a fascinating method for the preparation of ultrathin fibers. , 2007, Angewandte Chemie.

[26]  Craig A. Grimes,et al.  Synthesis and application of highly ordered arrays of TiO2 nanotubes , 2007 .

[27]  Y. F. Zhang,et al.  Hollow Fibers of Lanthanum Cerium Oxide Prepared by Electrospinning , 2007 .

[28]  F. Rojas,et al.  Structure and texture of self-assembled nanoporous SnO2 , 2005 .

[29]  P. Allongue,et al.  Truly quantitative XPS characterization of organic monolayers on silicon: study of alkyl and alkoxy monolayers on H-Si(111). , 2005, Journal of the American Chemical Society.

[30]  Jun Chen,et al.  α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery Applications , 2005 .

[31]  Chang Liu,et al.  Purification of single-wall carbon nanotubes by electrochemical oxidation , 2004 .

[32]  D. Bavykin,et al.  The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes , 2004 .

[33]  Gabor A. Somorjai,et al.  Formation of Hollow Nanocrystals Through the Nanoscale Kirkendall Effect , 2004, Science.

[34]  R. Tenne.  Advances in the synthesis of inorganic nanotubes and fullerene-like nanoparticles. , 2003, Angewandte Chemie.

[35]  M. Kotaki,et al.  A review on polymer nanofibers by electrospinning and their applications in nanocomposites , 2003 .

[36]  Younan Xia,et al.  One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications , 2003 .

[37]  N. Borisenko,et al.  Thermal Degradation of Polyvinylpyrrolidone on the Surface of Pyrogenic Silica , 2001 .

[38]  C. Pittman,et al.  Surface characterization of electrochemically oxidized carbon fibers , 1999 .

[39]  Y. Aggour.  Copolymerization and Characterization of Ethylene Glycol Allenyl Methyl Ether with N-Vinyl Pyrrolidone , 1998 .

[40]  O. Krylov,et al.  In situ IR spectroscopy of intermediates in heterogeneous oxidative catalysis , 1995 .

[41]  J. Román,et al.  Study of the thermal degradation of poly(N‐vinyl‐2‐pyrrolidone) by thermogravimetry–FTIR , 1993 .

[42]  Darrell H. Reneker,et al.  Electrospinning process and applications of electrospun fibers , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.