论文信息 - Fabrication of resistive CO gas sensor based on SnO2 nanopowders via low frequency AC electrophoretic deposition

Fabrication of resistive CO gas sensor based on SnO2 nanopowders via low frequency AC electrophoretic deposition

A resistive CO gas sensor has been fabricated using AC electrophoretic deposition (ACEPD) technique. SnO2 thick films are deposited by applying low frequency (0.01–1,000 Hz) AC electric field to a stable suspension of SnO2 nanoparticles in acetyl acetone. A carbon film base electrode is used as deposit substrate. Effect of CO gas exposure on conductivity of the SnO2 film at 300 °C is investigated. Results show that the sensor is sensitive and its response is repeatable. This work shows that ACEPD can be used as an easy and cheap technique for fabrication of electronic devices such as ceramic gas sensors.

[1] D. Kohl,et al. Nanostructured semiconductor gas sensors to overcome sensitivity limitations due to percolation effects , 1999 .

[2] R. P. Gupta,et al. Oxide Materials for Development of Integrated Gas Sensors—A Comprehensive Review , 2004 .

[3] S. P. Lee,et al. CO gas sensors operating at room temperature , 2003 .

[4] Ehsan Marzbanrad,et al. Electrophoretic deposition of SnO2 nanoparticles using low frequency AC electric fields , 2008 .

[5] Shan Gao,et al. Alcohols and acetone sensing properties of SnO2 thin films deposited by dip-coating , 2006 .

[6] R. P. Pant,et al. Effect of Ni doping on thick film SnO2 gas sensor , 2006 .

[7] Qing Peng,et al. High ethanol sensitive SnO2 microspheres , 2006 .

[8] Zhong Lin Wang,et al. Tin oxide nanosensor fabrication using AC dielectrophoretic manipulation of nanobelts , 2005 .

[9] Naganori Dougami,et al. Modification of metal oxide semiconductor gas sensor by electrophoretic deposition , 2003 .