A framework for the cost-optimal design of nearly zero energy buildings (NZEBs) in representative climates across Europe

Abstract Combining cost-optimal solutions to reach nearly zero energy buildings (NZEBs) in compliance with European policies is an ongoing challenge. Energy consumption can be reduced evaluating different configurations at the design stage and implementing the most appropriate solutions according to the building and the location. This paper develops a simulation-based optimization framework of cost-optimal choices and energy efficiency measures for new buildings. It combines energy and cost simulations using a sequential search technique to find the most effective combination of energy efficiency and renewable energy measures starting from a base configuration. The model is applied to a residential building prototype, taking into consideration hourly climatic data, construction methods, cost data and energy consumption. A cost database and a library of potential measures, related to envelope, appliances and systems, have been established and used within the optimization process. The potential impact of climate change on the estimated cooling loads has been included in the calculations. The paper shows the feasibility of European requirements for new NZEBs located in different cities. It describes how to best achieve the NZEB design at the lowest cost in 14 locations across Europe. Results highlight how the cost-optimal measures vary with climate and how in each location final selected options differ. Insulation and building tightness appear essential in colder climates, while efficient appliances and lighting are key measures in warmer locations. A key finding of the research is that a source energy reduction of 90% and beyond is feasible for new constructions in all locations. Results also show how efficient lighting and appliances considerably impact the building energy performance. The importance of integrating renewables and energy efficiency measures is confirmed as crucial to reach the NZEBs target.

[1]  Shady Attia,et al.  Simulation-based decision support tool for early stages of zero-energy building design , 2012 .

[2]  Delia D’Agostino,et al.  Criteria and structure of a harmonised data collection for NZEBs retrofit buildings in Europe , 2017 .

[3]  Kai Sirén,et al.  Multi-objective optimization of hybrid photovoltaic–thermal collectors integrated in a DHW heating system , 2014 .

[4]  Salvatore Carlucci,et al.  Assessing gaps and needs for integrating building performance optimization tools in net zero energy buildings design , 2013 .

[5]  Philippe Rigo,et al.  A review on simulation-based optimization methods applied to building performance analysis , 2014 .

[6]  Danny H.W. Li,et al.  Impact of climate change on energy use in the built environment in different climate zones – A review , 2012 .

[7]  Umberto Montanaro,et al.  Innovative technologies for NZEBs: An energy and economic analysis tool and a case study of a non-residential building for the Mediterranean climate , 2016 .

[8]  V. Pope,et al.  The impact of new physical parametrizations in the Hadley Centre climate model: HadAM3 , 2000 .

[9]  Paolo Maria Congedo,et al.  Cost-optimal design for nearly zero energy office buildings located in warm climates , 2015 .

[10]  Delia D’Agostino,et al.  Energy consumption and efficiency technology measures in European non-residential buildings , 2017 .

[11]  Paolo Maria Congedo,et al.  Efficient Solutions and Cost-Optimal Analysis for Existing School Buildings , 2016 .

[12]  Mohamed El Mankibi,et al.  Development of a multicriteria tool for optimizing the renovation of buildings , 2011 .

[13]  D. Parker,et al.  Data on cost-optimal Nearly Zero Energy Buildings (NZEBs) across Europe , 2018, Data in brief.

[14]  Gianluca Rapone,et al.  Optimisation of curtain wall façades for office buildings by means of PSO algorithm , 2012 .

[15]  Paolo Maria Congedo,et al.  CFD modeling and moisture dynamics implications of ventilation scenarios in historical buildings , 2014 .

[16]  Enrico Fabrizio,et al.  A simulation-based optimization method for cost-optimal analysis of nearly Zero Energy Buildings , 2014 .

[17]  Shinsuke Kato,et al.  Optimum design for indoor humidity by coupling Genetic Algorithm with transient simulation based on Contribution Ratio of Indoor Humidity and Climate analysis , 2012 .

[18]  Shivashish Bose,et al.  Exploring impact of opaque building envelope components on thermal and energy performance of houses in lower western Himalayans for optimal selection , 2016 .

[19]  D. D’Agostino.  Moisture dynamics in an historical masonry structure: The Cathedral of Lecce (South Italy) , 2013 .

[20]  Yuehong Lu,et al.  Robust optimal design of renewable energy system in nearly/net zero energy buildings under uncertainties , 2017 .

[21]  Kristoffer Negendahl,et al.  Building performance simulation in the early design stage: An introduction to integrated dynamic models , 2015 .

[22]  Haralambos Sarimveis,et al.  Optimization of window-openings design for thermal comfort in naturally ventilated buildings , 2012 .

[23]  John F. B. Mitchell,et al.  The simulation of SST, sea ice extents and ocean heat transports in a version of the Hadley Centre coupled model without flux adjustments , 2000 .

[24]  Ala Hasan,et al.  Minimisation of life cycle cost of a detached house using combined simulation and optimisation , 2008 .

[25]  Lauri Koskela,et al.  Cost-benefit analysis of nZEB energy efficiency strategies with on-site photovoltaic generation , 2017 .

[26]  Stefano Paolo Corgnati,et al.  Verification of stochastic behavioural models of occupants' interactions with windows in residential buildings , 2015 .

[27]  Zheng O'Neill,et al.  A methodology for meta-model based optimization in building energy models , 2012 .

[28]  Moncef Krarti,et al.  Enhanced Sequential Search Methodology for Identifying Cost-Optimal Building Pathways , 2008 .

[29]  M. Kummert,et al.  Designing net-zero energy buildings for the future climate, not for the past , 2012 .

[30]  Delia D׳Agostino,et al.  Assessment of the progress towards the establishment of definitions of Nearly Zero Energy Buildings (nZEBs) in European Member States , 2015 .

[31]  Alistair B. Sproul,et al.  Design optimisation for a low energy home in Sydney , 2011 .

[32]  Luca Castellazzi,et al.  Towards Nearly Zero Energy Buildings in Europe: A Focus on Retrofit in Non-Residential Buildings , 2017 .

[33]  Liang Zhou,et al.  Optimization of ventilation system design and operation in office environment , 2009 .

[34]  S. C. Kaushik,et al.  Thermal design of air-conditioned building for tropical climate using admittance method and genetic algorithm , 2012 .

[35]  S. Corgnati,et al.  Use of reference buildings to assess the energy saving potentials of the residential building stock: the experience of TABULA Project , 2014 .

[36]  Lorenzo Pagliano,et al.  Identification of cost-optimal and NZEB refurbishment levels for representative climates and building typologies across Europe , 2018 .

[37]  John C. Crittenden,et al.  Influence of climate on the environmental and economic life cycle assessments of window options in the United States , 2015 .

[38]  Paolo Maria Congedo,et al.  Assessment of cost-optimality and technical solutions in high performance multi-residential buildings in the Mediterranean area , 2015 .

[39]  Essia Znouda,et al.  Optimization of Mediterranean building design using genetic algorithms , 2007 .

[40]  Ryozo Ooka,et al.  Study on optimum design method for pleasant outdoor thermal environment using genetic algorithms (GA) and coupled simulation of convection, radiation and conduction , 2008 .

[41]  David Coley,et al.  Assessing the risk of climate change for buildings: A comparison between multi-year and probabilisti , 2011 .

[42]  Enrico Fabrizio,et al.  Reference buildings for cost optimal analysis: Method of definition and application , 2013 .

[43]  Stefano Paolo Corgnati,et al.  nZEB definitions in Europe , 2014 .

[44]  M. Frey,et al.  Towards nearly zero-energy buildings: The state-of-art of national regulations in Europe , 2013 .

[45]  P. Bertoldi,et al.  Data on European non-residential buildings , 2017, Data in brief.

[46]  Paolo Maria Congedo,et al.  Envelope Design Optimization by Thermal Modelling of a Building in a Warm Climate , 2017 .

[47]  Yongjun Sun,et al.  Sensitivity analysis of macro-parameters in the system design of net zero energy building , 2015 .

[48]  D. Coley,et al.  The implications of a changing climate for buildings , 2012 .

[49]  Paolo Maria Congedo,et al.  Cost-optimal analysis and technical comparison between standard and high efficient mono-residential buildings in a warm climate , 2015 .

[50]  Jonathan A. Wright,et al.  Optimization of building thermal design and control by multi-criterion genetic algorithm , 2002 .

[51]  Martyn P. Chipperfield,et al.  Persistent shift of the Arctic polar vortex towards the Eurasian continent in recent decades , 2016 .

[52]  R. Judkoff,et al.  Method for Determining Optimal Residential Energy Efficiency Retrofit Packages , 2011 .

[53]  M. Hamdy,et al.  A multi-stage optimization method for cost-optimal and nearly-zero-energy building solutions in line with the EPBD-recast 2010 , 2013 .

[54]  Simone Ferrari,et al.  Energy-environmental and cost assessment of a set of strategies for retrofitting a public building toward nearly zero-energy building target , 2017 .