Synthesis and physical behaviour of In2S3 films

Abstract In2S3 layers have been grown by close-spaced evaporation of pre-synthesized In2S3 powder from its constituent elements. The layers were deposited on glass substrates at temperatures in the range, 200–350 °C. The effect of substrate temperature on composition, structure, morphology, electrical and optical properties of the as-grown indium sulfide films has been studied. The synthesized powder exhibited cubic structure with a grain size of 63.92 nm and S/In ratio of 1.01. The films grown at 200 °C were amorphous in nature while its crystallinity increased with the increase of substrate temperature to 300 °C. The films exhibited pure tetragonal β-In2S3 phase at the substrate temperature of 350 °C. The surface morphological analysis revealed that the films grown at 300 °C had an average roughness of 1.43 nm. These films showed a S/In ratio of 0.98 and a lower electrical resistivity of 1.28 × 103 Ω cm. The optical band gap was found to be direct and the layers grown at 300 °C showed a higher optical transmittance of 78% and an energy band gap of 2.49 eV.

[1]  R. Hoffmann,et al.  Influence of Substrate Temperature on the Condensation of Vacuum Evaporated Films of MgF2 and ZnS , 1969 .

[2]  Chang-Dae Kim,et al.  Optical energy gaps of β-In2S3 thin films grown by spray pyrolysis , 1986 .

[3]  The influence of the nature of the substrate on the ordering of mesoporous thin films , 2006 .

[4]  R. Becker,et al.  Synthesis and photoelectrochemistry of In2S3 , 1986 .

[5]  K. Reichelt,et al.  The preparation of thin films by physical vapour deposition methods , 1990 .

[6]  A. Ortiz,et al.  Optoelectronical properties of indium sulfide thin films prepared by spray pyrolysis for photovoltaic applications , 2005 .

[7]  N. Kamoun,et al.  Acoustic Properties of β-In2S3 Thin Films Prepared by Spray , 1999 .

[8]  Y. Qian,et al.  Hydrothermal Preparation and Characterization of Nanocrystalline Powder of β-Indium Sulfide , 1998 .

[9]  E. Dalas,et al.  Primary solid-state batteries constructed from copper and indium sulphides , 1993, Journal of Materials Science.

[10]  B. Pradeep,et al.  Reactively Evaporated Films of Indium Sulphide , 1988, March 16.

[11]  Tokihiro Nishihara,et al.  Control of preferred orientation for ZnOx films: control of self-texture , 1993 .

[12]  M. Sotelo-Lerma,et al.  Structural and optical studies on thermal-annealed In2S3 films prepared by the chemical bath deposition technique , 2005 .

[13]  R. Nitsche,et al.  Vapour growth of three In2S3 modifications by iodine transport , 1975 .

[14]  Y. Kagawa,et al.  Effect of grain boundary microcracking on the light transmittance of sintered transparent MgAl2O4 , 2003 .

[15]  S. Patel,et al.  Growth of AgGaSe2 thin films , 1985 .

[16]  R. Stirn,et al.  Low‐temperature deposition of low resistivity ZnSe films by reactive sputtering , 1986 .

[17]  H. Arakawa,et al.  Semiconductor-sensitized solar cells based on nanocrystalline In2S3/In2O3 thin film electrodes , 2000 .

[18]  S. Chaudhuri,et al.  Grain boundary effect in polycrystalline ZnTe films , 1994 .

[19]  J. Dow,et al.  Toward a Unified Theory of Urbach's Rule and Exponential Absorption Edges , 1972 .

[20]  B. Warren,et al.  X-Ray Diffraction , 2014 .

[21]  H. Metwally,et al.  Electrical properties of thin films , 1998 .

[22]  Toshio Kimura,et al.  Crystallization behavior and origin of c-axis orientation in sol-gel-derived ZnO:Li thin films on glass substrates , 2001 .

[23]  S. Khodier,et al.  Optical characteristics of thin ZnSe films of different thicknesses , 1996 .

[24]  C. Thompson Structure Evolution During Processing of Polycrystalline Films , 2000 .

[25]  P. Prathap,et al.  Close-spaced evaporated ZnSe films: Preparation and characterization , 2005 .

[26]  Kazuhisa Konishi,et al.  Single-source organometallic chemical vapour deposition process for sulphide thin films: Introduction of a new organometallic precursor BunIn(SPri)2 and preparation of In2S3 thin films , 1991 .

[27]  R. Jayakrishnan,et al.  Anomalous behavior of silver doped indium sulfide thin films , 2006 .

[28]  J. Herrero,et al.  Structure and morphology of the indium hydroxy sulphide thin films , 2000 .