Programming mechanism of polysilicon resistor fuses

The programming characteristics of polysilicon resistor fuses were investigated. It was found that an open circuit occurs only after the fuse makes a transition to a second-breakdown state in which the current flow is mainly through a molten filament. Filamentary current flow is stable since the resistivity of silicon decreases abruptly upon melting. A simple model was developed which explains the observedI - Vcharacteristics. Fuse opening occurs when the current in second breakdown exceeds a critical current Iminwhich depends strongly on the fuse thickness and the presence or absence of a passivation layer over the fuse. The gap forms at the positive end, suggesting that the silicon ions move by drift in the applied electric field.

[1]  D. Tolliver,et al.  A Scanning Electron Microscope Investigation of Glass Flow in MOS Integrated Circuit Fabrication , 1974 .

[2]  T. Mano,et al.  A fault-tolerant 256K RAM fabricated with molybdenum-polysilicon technology , 1980, IEEE Journal of Solid-State Circuits.

[3]  P. Sharp,et al.  Redundancy techniques for fast static RAMs , 1981, 1981 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[4]  A. S. Grove.  Physics and Technology of Semiconductor Devices , 1967 .

[5]  C. R. Barrett,et al.  Reliability Studies of Polysilicon Fusible Link PROM's , 1976, 14th International Reliability Physics Symposium.

[6]  R. Smith,et al.  Cost-effective yield improvement in fault-tolerant VLSI memory , 1981, 1981 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[7]  R. Wallace,et al.  A 35ns 16K PROM , 1980, 1980 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[8]  V. McKenny.  A 5V 64K EPROM utilizing redundant circuitry , 1980, 1980 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[9]  H. A. Schafft,et al.  Second breakdown—A comprehensive review , 1967 .

[10]  F. J. Morin,et al.  Electrical Properties of Silicon Containing Arsenic and Boron , 1954 .

[11]  G. B. Kenney,et al.  Fusing Mechanism of Nichrome-Linked Programmable Read-Only Memory Devices , 1976, 14th International Reliability Physics Symposium.

[12]  Dwight L. Crook,et al.  Redundancy Reliability , 1981, 19th International Reliability Physics Symposium.

[13]  W. B. Smith,et al.  Filamentation in silicon‐on‐sapphire homogeneous thin films , 1973 .

[14]  T. Masuhara,et al.  HI-CMOSII 4K static RAM , 1981, 1981 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[15]  J. Brady,et al.  A 100ns 64K dynamic RAM using redundancy techniques , 1981, 1981 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.