Critical challenges for EUV resist materials

Although Extreme ultraviolet lithography (EUVL) is now well into the commercialization phase, critical challenges remain in the development of EUV resist materials. The major issue for the 22-nm half-pitch node remains simultaneously meeting resolution, line-edge roughness (LER), and sensitivity requirements. Although several materials have met the resolution requirements, LER and sensitivity remain a challenge. As we move beyond the 22-nm node, however, even resolution remains a significant challenge. Chemically amplified resists have yet to demonstrate the required resolution at any speed or LER for 16-nm half pitch and below. Going to non-chemically amplified resists, however, 16-nm resolution has been achieved with a LER of 2 nm but a sensitivity of only 70 mJ/cm2.

[1]  Harry J. Levinson,et al.  Line edge roughness and intrinsic bias for two methacrylate polymer resist systems , 2006 .

[2]  Kenneth A. Goldberg,et al.  The SEMATECH Berkeley MET pushing EUV development beyond 22nm half pitch , 2010, Advanced Lithography.

[3]  John J. Biafore,et al.  Predictive linewidth roughness and CDU simulation using a calibrated physical stochastic resist model , 2010, Advanced Lithography.

[4]  Patrick P. Naulleau,et al.  Directly patterned inorganic hardmask for EUV lithography , 2011, Advanced Lithography.

[5]  Gregg M. Gallatin.  Resist blur and line edge roughness (Invited Paper) , 2004, SPIE Advanced Lithography.

[6]  Patrick P Naulleau.  Relevance of mask-roughness-induced printed line-edge roughness in recent and future extreme-ultraviolet lithography tests. , 2004, Applied optics.

[7]  Peter Trefonas,et al.  Shot noise, LER, and quantum efficiency of EUV photoresists , 2004, SPIE Advanced Lithography.

[8]  Chris A. Mack.  Stochastic approach to modeling photoresist developmenta) , 2009 .

[9]  Patrick P. Naulleau,et al.  Effect of resist on the transfer of line-edge roughness spatial metrics from mask to wafer , 2009 .

[10]  Yayi Wei,et al.  Evaluation of EUV resist materials for use at the 32 nm half-pitch node , 2008, SPIE Advanced Lithography.

[11]  Kenneth A. Goldberg,et al.  The SEMATECH Berkeley MET: extending EUV learning down to 16nm half pitch , 2011, Advanced Lithography.

[12]  Gregg M Gallatin,et al.  Line-edge roughness transfer function and its application to determining mask effects in EUV resist characterization. , 2003, Applied optics.

[13]  Patrick P. Naulleau,et al.  Out of band radiation effects on resist patterning , 2011, Advanced Lithography.