Multimaterial 4D Printing with Tailorable Shape Memory Polymers

We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures. The approach is based on high resolution projection microstereolithography (PμSL) and uses a family of photo-curable methacrylate based copolymer networks. We designed the constituents and compositions to exhibit desired thermomechanical behavior (including rubbery modulus, glass transition temperature and failure strain which is more than 300% and larger than any existing printable materials) to enable controlled shape memory behavior. We used a high resolution, high contrast digital micro display to ensure high resolution of photo-curing methacrylate based SMPs that requires higher exposure energy than more common acrylate based polymers. An automated material exchange process enables the manufacture of 3D composite architectures from multiple photo-curable SMPs. In order to understand the behavior of the 3D composite microarchitectures, we carry out high fidelity computational simulations of their complex nonlinear, time-dependent behavior and study important design considerations including local deformation, shape fixity and free recovery rate. Simulations are in good agreement with experiments for a series of single and multimaterial components and can be used to facilitate the design of SMP 3D structures.

[1]  D. J. Montgomery,et al.  The physics of rubber elasticity , 1949 .

[2]  P. Couchman.  Compositional Variation of Glass-Transition Temperatures. 2. Application of the Thermodynamic Theory to Compatible Polymer Blends , 1978 .

[3]  P. Couchman.  THE COMPOSITIONAL VARIATION OF GLASS TRANSITION TEMPERATURES * , 1981 .

[4]  C. Bowman,et al.  Polymers for information storage systems III. Crosslinked structure of polydimethacrylates , 1990 .

[5]  Kristi S. Anseth,et al.  Reaction behaviour and kinetic constants for photopolymerizations of multi(meth)acrylate monomers , 1994 .

[6]  Kristi S. Anseth,et al.  Real-Time Infrared Characterization of Reaction Diffusion during Multifunctional Monomer Polymerizations , 1995 .

[7]  Christopher N. Bowman,et al.  Structural Evolution of Dimethacrylate Networks Studied by Dielectric Spectroscopy , 1998 .

[8]  C. Bowman,et al.  Effect of Polymerization Temperature and Cross-Linker Concentration on Reaction Diffusion Controlled Termination , 1999 .

[9]  C. Bowman,et al.  Effects of Composition and Reactivity on the Reaction Kinetics of Dimethacrylate Dimethacrylate Copolymerizations , 1999 .

[10]  Martin M. Mikulas,et al.  Carbon Fiber Reinforced Shape Memory Polymer Composites , 2000 .

[11]  Applications , 2001, Int. J. High Perform. Comput. Appl..

[12]  A. Lendlein,et al.  Shape-memory polymers , 2002 .

[13]  Nicholas X. Fang,et al.  Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[14]  A Lendlein,et al.  Shape-memory polymers as stimuli-sensitive implant materials. , 2005, Clinical hemorheology and microcirculation.

[15]  Takashi Maeno,et al.  Five-fingered Robot Hand using Ultrasonic Motors and Elastic Elements , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[16]  J. Peponis.  Formulation , 1997, Karaite Marriage Contracts from the Cairo Geniza.

[17]  Yiping Liu,et al.  Thermomechanics of the shape memory effect in polymers for biomedical applications. , 2005, Journal of biomedical materials research. Part A.

[18]  Robin Shandas,et al.  Unconstrained recovery characterization of shape-memory polymer networks for cardiovascular applications. , 2007, Biomaterials.

[19]  Alicia M. Ortega,et al.  Strong, Tailored, Biocompatible Shape‐Memory Polymer Networks , 2008, Advanced functional materials.

[20]  Ken Gall,et al.  Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (meth)acrylate shape-memory polymer networks , 2008 .

[21]  Thao D. Nguyen,et al.  Finite deformation thermo-mechanical behavior of thermally induced shape memory polymers , 2008 .

[22]  Thao D. Nguyen,et al.  A thermoviscoelastic model for amorphous shape memory polymers: Incorporating structural and stress relaxation , 2008 .

[23]  J. Lewis,et al.  Two- and three-dimensional folding of thin film single-crystalline silicon for photovoltaic power applications , 2009, Proceedings of the National Academy of Sciences.

[24]  David H Gracias,et al.  Tetherless thermobiochemically actuated microgrippers , 2009, Proceedings of the National Academy of Sciences.

[25]  Martin L. Dunn,et al.  Photomechanics of light-activated polymers , 2009 .

[26]  Xin Lan,et al.  Fiber reinforced shape-memory polymer composite and its application in a deployable hinge , 2009 .

[27]  T. Ware,et al.  High‐Strain Shape‐Memory Polymers , 2010 .

[28]  Lallit Anand,et al.  Thermally actuated shape-memory polymers: Experiments, theory, and numerical simulations , 2010 .

[29]  Robin Shandas,et al.  Effects of thermal rates on the thermomechanical behaviors of amorphous shape memory polymers , 2010 .

[30]  Lallit Anand,et al.  A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition , 2010 .

[31]  Howon Lee,et al.  First jump of microgel; actuation speed enhancement by elastic instability , 2010, 1008.4078.

[32]  J. Grossman,et al.  Three-dimensional photovoltaics , 2010 .

[33]  Zhong You,et al.  A solution for folding rigid tall shopping bags , 2011, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[34]  L. Anand,et al.  A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation , 2009, International Journal of Plasticity.

[35]  Zeeya Merali.  Profile: Zhong You. 'Origami engineer' flexes to create stronger, more agile materials. , 2011, Science.

[36]  Lallit Anand,et al.  A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications , 2011 .

[37]  Martin L. Dunn,et al.  Two-way reversible shape memory effects in a free-standing polymer composite , 2011 .

[38]  H. Jerry Qi,et al.  A 3D finite deformation constitutive model for amorphous shape memory polymers: A multi-branch modeling approach for nonequilibrium relaxation processes , 2011 .

[39]  Rashid Bashir,et al.  Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography. , 2012, Lab on a chip.

[40]  Ryan B. Wicker,et al.  Multi-material, multi-technology stereolithography , 2012 .

[41]  Qi Ge,et al.  Prediction of temperature-dependent free recovery behaviors of amorphous shape memory polymers , 2012 .

[42]  Howon Lee,et al.  Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system. , 2012, The Review of scientific instruments.

[43]  Walterio W. Mayol-Cuevas,et al.  Robotics and Automation (ICRA), 2012 IEEE International Conference on , 2012 .

[44]  M. Dunn,et al.  Photo-origami—Bending and folding polymers with light , 2012 .

[45]  Howon Lee,et al.  Prescribed pattern transformation in swelling gel tubes by elastic instability. , 2012, Physical review letters.

[46]  Choon Chiang Foo,et al.  Stretchable, Transparent, Ionic Conductors , 2013, Science.

[47]  Viktor Malyarchuk,et al.  Digital cameras with designs inspired by the arthropod eye , 2013, Nature.

[48]  Chi Zhou,et al.  Digital material fabrication using mask‐image‐projection‐based stereolithography , 2013 .

[49]  Qi Ge,et al.  Active materials by four-dimension printing , 2013 .

[50]  Martin L. Dunn,et al.  Active origami by 4D printing , 2014 .

[51]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[52]  Qi Ge,et al.  Reduced time as a unified parameter determining fixity and free recovery of shape memory polymers , 2014, Nature Communications.

[53]  Xuanhe Zhao,et al.  Cephalopod-inspired design of electro-mechano-chemically responsive elastomers for on-demand fluorescent patterning , 2014, Nature Communications.

[54]  R. Xiao,et al.  Functional stimuli responsive hydrogel devices by self-folding , 2014 .

[55]  G. Whitesides,et al.  Pneumatic Networks for Soft Robotics that Actuate Rapidly , 2014 .

[56]  Hye Rin Kwag,et al.  Stimuli-responsive theragrippers for chemomechanical controlled release. , 2014, Angewandte Chemie.

[57]  Ramesh Raskar,et al.  Active Printed Materials for Complex Self-Evolving Deformations , 2014, Scientific Reports.

[58]  Martin L. Dunn,et al.  Controlled Sequential Shape Changing Components by 3D Printing of Shape Memory Polymer Multimaterials , 2015 .

[59]  Martin L. Dunn,et al.  Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers , 2015, Scientific Reports.

[60]  Dong Yan,et al.  Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique , 2015, Scientific Reports.

[61]  Shannon E Bakarich,et al.  4D Printing with Mechanically Robust, Thermally Actuating Hydrogels. , 2015, Macromolecular rapid communications.

[62]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[63]  Robert J. Wood,et al.  A 3D-printed, functionally graded soft robot powered by combustion , 2015, Science.

[64]  Elisabetta A. Matsumoto,et al.  Biomimetic 4D printing. , 2016, Nature materials.

[65]  Chao Yuan,et al.  3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials , 2016, Scientific Reports.

[66]  Chao Yuan,et al.  Multi-shape active composites by 3D printing of digital shape memory polymers , 2016, Scientific Reports.

[67]  L. Christophorou.  Science , 2018, Emerging Dynamics: Science, Energy, Society and Values.