Modelling and comparison of trapped fields in (RE)BCO bulk superconductors for activation using pulsed field magnetization

The ability to generate a permanent, stable magnetic field unsupported by an electromotive force is fundamental to a variety of engineering applications. Bulk high temperature superconducting (HTS) materials can trap magnetic fields of magnitude over ten times higher than the maximum field produced by conventional magnets, which is limited practically to rather less than 2 T. In this paper, two large c-axis oriented, single-grain YBCO and GdBCO bulk superconductors are magnetized by the pulsed field magnetization (PFM) technique at temperatures of 40 and 65 K and the characteristics of the resulting trapped field profile are investigated with a view of magnetizing such samples as trapped field magnets (TFMs) in situ inside a trapped flux-type superconducting electric machine. A comparison is made between the temperatures at which the pulsed magnetic field is applied and the results have strong implications for the optimum operating temperature for TFMs in trapped flux-type superconducting electric machines. The effects of inhomogeneities, which occur during the growth process of single-grain bulk superconductors, on the trapped field and maximum temperature rise in the sample are modelled numerically using a 3D finite-element model based on the H-formulation and implemented in Comsol Multiphysics 4.3a. The results agree qualitatively with the observed experimental results, in that inhomogeneities act to distort the trapped field profile and reduce the magnitude of the trapped field due to localized heating within the sample and preferential movement and pinning of flux lines around the growth section regions (GSRs) and growth sector boundaries (GSBs), respectively. The modelling framework will allow further investigation of various inhomogeneities that arise during the processing of (RE)BCO bulk superconductors, including inhomogeneous Jc distributions and the presence of current-limiting grain boundaries and cracks, and it can be used to assist optimization of processing and PFM techniques for practical bulk superconductor applications.

[1]  Masato Murakami,et al.  High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K , 2003, Nature.

[2]  Time evolution and spatial distribution of temperature in YBCO bulk superconductor after pulse field magnetizing , 2003 .

[3]  C. Dewhurst,et al.  Distribution of critical current density in large YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// grains fabricated using seeded peritectic solidification , 1997, IEEE Transactions on Applied Superconductivity.

[4]  Mark D. Ainslie,et al.  Calculating transport AC losses in stacks of high temperature superconductor coated conductors with magnetic substrates using FEM , 2012 .

[5]  Masataka Iwakuma,et al.  Numerical evaluation of AC losses in HTS wires with 2D FEM formulated by self magnetic field , 2003 .

[6]  D. Cardwell,et al.  Development of a generic seed crystal for the fabrication of large grain (RE)–Ba–Cu–O bulk superconductors , 2005 .

[7]  C. P. Bean.  Magnetization of hard superconductors , 1962 .

[8]  Francesco Grilli,et al.  A full 3D time-dependent electromagnetic model for Roebel cables , 2013 .

[9]  W. Bao.  Structure, magnetic order and excitations in the 245 family of Fe-based superconductors , 2014, Journal of physics. Condensed matter : an Institute of Physics journal.

[10]  D. Cardwell,et al.  Properties of grain boundaries in bulk, melt processed Y–Ba–Cu–O fabricated using bridge-shaped seeds , 2012 .

[11]  C. Plummer,et al.  Dependence of the shape of the resistive transition on composite inhomogeneity in multifilamentary wires , 1987 .

[12]  Weijia Yuan,et al.  Numerical Analysis of AC Loss Reduction in HTS Superconducting Coils Using Magnetic Materials to Divert Flux , 2013, IEEE Transactions on Applied Superconductivity.

[13]  Luciano Martini,et al.  Development of an edge-element model for AC loss computation of high-temperature superconductors , 2006 .

[14]  K. Iida,et al.  Strongly Coupled Artificial Bulk HTS Grain Boundaries With High Critical Current Densities , 2007, IEEE Transactions on Applied Superconductivity.

[15]  X. Yao,et al.  Multi-seeded growth of melt processed Gd–Ba–Cu–O bulk superconductors using different arrangements of thin film seeds , 2013 .

[16]  Masato Murakami,et al.  Applications of bulk high-temperature Superconductors , 1995, Proceedings of the IEEE.

[17]  S. Nariki,et al.  Melt-processed Gd–Ba–Cu–O superconductor with trapped field of 3 T at 77 K , 2005 .

[18]  H. Ohsaki,et al.  Influence of local superconducting properties on pulsed field magnetization of YBCO bulk superconductor , 2005 .

[19]  R. Mansour.  High‐Temperature Superconductors , 2005 .

[20]  Tetsuo Oka,et al.  Higher trapped field over 5 T on HTSC bulk by modified pulse field magnetizing , 2006 .

[21]  B. Glowacki,et al.  Enhanced trapped field achieved in a superconducting bulk using high thermal conductivity structures following simulated pulsed field magnetization , 2012 .

[22]  Mark D. Ainslie,et al.  An improved FEM model for computing transport AC loss in coils made of RABiTS YBCO coated conductors for electric machines , 2011 .

[23]  C. P. Bean,et al.  Magnetization of High-Field Superconductors , 1964 .

[24]  Jakob Rhyner,et al.  Magnetic properties and AC-losses of superconductors with power law current-voltage characteristics , 1993 .

[25]  T. A. Coombs,et al.  Numerical solution of critical state in superconductivity by finite element software , 2006 .

[26]  Tetsuo Oka,et al.  Pulsed field magnetization of a 36?mm diameter single-domain Sm?Ba?Cu?O bulk superconductor at?30, 35?and 77 K , 2005 .

[27]  H. Ohsaki,et al.  Flux Dynamics in Inhomogeneous Bulk Superconductor During Pulsed Field Magnetization , 2006, IEEE Transactions on Applied Superconductivity.

[28]  S. Nariki,et al.  Pulsed Field Magnetization for GdBaCuO Bulk With Stronger Pinning Characteristics , 2009, IEEE Transactions on Applied Superconductivity.

[29]  Bertrand Dutoit,et al.  Evaluation of two commercial finite element packages for calculating AC losses in 2-D high temperature superconducting strips , 2008 .

[30]  T. A. Coombs,et al.  Comparison of first‐ and second‐order 2D finite element models for calculating AC loss in high temperature superconductor coated conductors , 2011 .

[31]  Mitsuru Izumi,et al.  An overview of rotating machine systems with high-temperature bulk superconductors , 2012 .